1. Rhagymadrodd
Thank you for choosing the Oasser Portable Tire Inflator Model TZ101. This compact and powerful device is designed for quick and efficient inflation of various items, including car tires, motorcycle tires, bicycle tires, and sports balls. Featuring a 150 PSI maximum pressure, an LCD display, LED light, and USB charging capabilities, it offers convenience and reliability for daily use and emergencies. Please read this manual thoroughly before operation to ensure safe and optimal performance.
2. Gwybodaeth Diogelwch
To prevent injury or damage to the device, always adhere to the following safety guidelines:
- Cadwch y ddyfais i ffwrdd oddi wrth blant.
- Peidiwch â gweithredu'r chwyddydd mewn amodau gwlyb nac yn agos at hylifau neu nwyon fflamadwy.
- Ensure the air hose is securely connected to the valve stem before starting inflation.
- Do not over-inflate. Always refer to the recommended pressure for your specific item. The device features an auto-stop function, but manual monitoring is advised.
- Nodyn Pwysig: This inflator is not suitable for items requiring very low pressure (typically below 3 PSI) or large air volumes, such as truck tires, air mattresses, inflatable boats, kayaks, pools, water slides, yoga balls, paddle boards, or other large inflatables. Using it for these items risks over-inflation or pump damage.
- Osgowch weithredu parhaus am gyfnod hir i atal gorboethi. Gadewch i'r ddyfais oeri os bydd yn mynd yn boeth.
- Do not disassemble or modify the device. Contact customer support for any repairs.
3. Cynnyrch Drosview a Chydrannau
The Oasser Portable Tire Inflator comes with a complete kit for various inflation needs.
Cynnwys y Pecyn:
- Oasser Tire Inflator (Model TZ101)
- Air Hose (30cm)
- Nozzles: Presta-to-Schrader adapter, ball inflator needle, long and short tapered nozzles
- Bag Storio
- Cebl Codi Tâl Math-C
- Llawlyfr Defnyddiwr (y ddogfen hon)
Ffigur 3.1: Cydrannau wedi'u Cynnwys
4. Gosod
4.1 Codi Tâl ar y Dyfais
Before first use, fully charge the tire inflator. The device is powered by a high-capacity rechargeable battery.
- Connect the provided USB-C charging cable to the Type-C input port on the inflator.
- Connect the other end of the USB-C cable to a compatible USB power adapter (not included) or a USB port.
- The LCD display will indicate the charging status. A full charge typically takes approximately 4 hours.
Figure 4.1: Dual Charging Methods (Self-Charging and Power Bank Function)
4.2 Cysylltu'r Pibell Aer
Screw the air hose securely into the designated port on the top of the inflator unit.
5. Cyfarwyddiadau Gweithredu
5.1 Camau Gweithredu Sylfaenol
Figure 5.1: Operating Steps Overview
- Cysylltu: Attach the air hose to the inflator. Securely attach the quick-lock air chuck onto the tire's valve stem. Ensure a tight, leak-free connection.
- Pŵer Ymlaen: Pwyswch a dal y botwm pŵer (U) for 3 seconds to turn on the device. The LCD screen will illuminate, displaying the current pressure and preset value.
- Gosod Paramedrau:
- Pwyswch y botwm modd (M) to cycle through the 5 preset inflation modes: Car, Motorcycle, Bicycle, Ball, and Custom.
- Press the unit button (U) to select your desired pressure unit (PSI, BAR, KPA, kg/cm²).
- Use the '+' and '-' buttons to adjust the target pressure value. The device remembers your last used settings for quick startup.
- Dechrau Chwyddiant: Pwyswch y botwm pŵer (U) again to begin inflating. The inflator will automatically stop once the preset pressure is reached.
- Datgysylltu: Once inflation is complete, quickly detach the air chuck from the valve stem.
5.2 Dulliau Rhagosodedig
The inflator offers 5 preset modes for common inflation tasks:
- Modd Car: For standard car tires (typically 26-50 PSI).
- Modd Beic Modur: For motorcycle tires (typically 26-45 PSI).
- Modd Beic: For bicycle tires (typically 30-120 PSI).
- Modd Pêl: For sports balls (typically 4-16 PSI).
- Modd Custom: Allows manual setting of pressure up to 150 PSI for other inflatables.
Figure 5.2: 5 Pre-Set Inflation Modes
Swyddogaeth Golau LED 5.3
The built-in LED light provides illumination for nighttime use or emergencies.
- Pwyswch y botwm golau (💡) once for a steady white light.
- Press again for a slow red flash (hazard warning).
- Press a third time for an SOS fast red flash.
- Press a fourth time to turn off the light.
Figure 5.3: 3-Mode LED Lighting
5.4 Swyddogaeth y Banc Pŵer
The inflator can also serve as a power bank to charge other devices.
- Connect your device's charging cable to the USB-A output port (5V/1A) on the inflator.
- Bydd y chwyddydd yn dechrau gwefru'ch dyfais.
6. cynnal
6.1 Glanhau
Sychwch du allan y chwyddwr gyda lliain meddal, damp lliain. Peidiwch â defnyddio cemegau llym na glanhawyr sgraffiniol. Gwnewch yn siŵr bod y ddyfais yn sych cyn ei storio.
6.2 Storio
Store the inflator and its accessories in the provided storage bag in a cool, dry place, away from direct sunlight and extreme temperatures. For long-term storage, ensure the battery is charged to approximately 50% and recharge every 3-6 months to maintain battery health.
Figure 6.1: Compact Size for Easy Storage
7. Datrys Problemau
If you encounter issues with your Oasser Portable Tire Inflator, refer to the following common problems and solutions:
| Problem | Achos Posibl | Ateb |
|---|---|---|
| Nid yw dyfais yn troi ymlaen. | Batri isel; Botwm pŵer heb ei ddal yn ddigon hir. | Gwefrwch y ddyfais yn llawn. Pwyswch a daliwch y botwm pŵer am 3 eiliad. |
| Inflator runs but no air comes out or inflation is slow. | Air hose not securely connected; Valve stem blocked; Incorrect nozzle used. | Ensure air hose is tightly screwed in and air chuck is firmly attached to the valve. Check valve stem for obstructions. Use the correct nozzle adapter. |
| Device stops before reaching preset pressure. | Low battery; Overheating protection activated. | Recharge the device. Allow the inflator to cool down for 10-15 minutes before resuming operation. |
| Darlleniad pwysedd anghywir. | Loose connection; Sensor malfunction. | Ensure the air chuck is securely attached. If the problem persists, contact customer support. |
If the issue is not resolved by the above steps, please contact Oasser customer support.
8. manylebau
| Nodwedd | Manyleb |
|---|---|
| Rhif Model | TZ101 |
| Pwysedd Uchaf | 150 PSI |
| Dimensiynau Cynnyrch | 9 x 4.8 x 13 cm (3.5 x 1.9 x 5.1 modfedd) |
| Pwysau Eitem | 540 g |
| Ffynhonnell Pwer | Wedi'i Bweru â Batri (Ion Lithiwm) |
| Cyftage | 3.7 folt |
| Porthladd Codi Tâl | USB Math-C |
| Allbwn USB | 5V/1A (for power bank function) |
| Hyd Hose | 30 cm |
| Lefel Sain | 70 Desibel |
| Nodweddion Arbennig | Cordless, Portable, Emergency LED light, Power bank function, One-touch preset modes, Memory function, Quick inflation, Smart auto-stop |
9. Gwarant
The Oasser Portable Tire Inflator Model TZ101 comes with a Gwarant 12 mis from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper maintenance. Please retain your proof of purchase for warranty claims.
10. Cefnogaeth i Gwsmeriaid
For any questions, technical assistance, or warranty claims, please contact Oasser customer support through the retailer where you purchased the product or visit the official Oasser website for contact information. Please have your model number (TZ101) and proof of purchase ready when contacting support.
