AQQA Aquarium Heater 300W Instruction Manual

1. Cyfarwyddiadau Diogelwch Pwysig

Please read and understand all safety instructions before operating this product. Failure to follow these instructions may result in product damage, injury, or electric shock.

• Always ensure the heater is wedi'i foddi'n llawn in water before connecting it to a power source.
• Ensure proper water circulation around the heater for optimal performance and safety.
• After turning off the heater, allow it to cool in the aquarium water for 15-30 minutes before removing it. This prevents the residual heat from potentially damaging the protective shell.
• Do not place the aquarium heater directly into sand or mud, as this can lead to inaccurate temperature readings and inefficient heating.
• Cadwch y cynnyrch hwn allan o gyrraedd plant.
• Inspect the power cord and heater for any damage before each use. Do not use if damaged.
• Mae'r teclyn hwn wedi'i fwriadu ar gyfer defnydd dan do yn unig.

2. Cynnyrch Drosview

The AQQA 300W Aquarium Heater is designed to maintain a stable and consistent water temperature in your aquarium. It features durable quartz heating rods for efficient heat transfer, a heat-resistant ABS protective shell, and an external digital controller for easy and safe temperature adjustment.

Nodweddion Allweddol:

• Durable Quartz Heating Rods: Provides fast, even, and efficient heat transfer.
• Heat-Resistant ABS Shell: Offers reliable performance and anti-scald protection.
• Rheolydd Digidol Allanol: Allows for safe and convenient temperature adjustment outside the water.
• Amddiffyniad gorboethi deallus: Automatically stops heating if water temperature exceeds 95°F (35°C).
• Amddiffyniad Rhedeg Sych: Auto power-off if the heater is not fully submerged.
• Swyddogaeth Cof: Automatically restores previous temperature settings after a power interruption.
• Ystod Tymheredd Addasadwy: 59-94°F (15-34°C).

3. Gosod

Follow these steps to properly install your AQQA Aquarium Heater:

1. Atodwch y Pad Gludiog: Clean the desired area on the outside of your aquarium tank. Stick the adhesive pad firmly onto the tank surface.
2. Mount Controller Bracket: Attach the controller bracket to the adhesive pad.
3. Rheolwr Lle: Securely place the external digital controller onto the mounted bracket.
4. Install Heater: Submerge the heater completely in your aquarium water. Ensure it is positioned vertically or horizontally in an area with good water circulation. Use the included suction cups to secure the heater to the inside wall of the tank.
5. Pwer Cysylltu: Plug the heater's power cord into a suitable electrical outlet. The controller will display the current water temperature.

Nodyn Pwysig:

• The heater must be fully submerged at all times during operation.
• Avoid burying the heater in sand or gravel to prevent inaccurate readings and potential damage.

4. Cyfarwyddiadau Gweithredu

The external digital controller provides easy access to adjust and monitor your aquarium's temperature.

Addasiad Tymheredd:

1. Unlock Controller: Long press the lock button (🔒) for 1-3 seconds to enter setting mode. The 'Set Temp' display will begin to flash.
2. Gosod Tymheredd Targed: Defnyddiwch yr i fyny (↑) ac i lawr (↓) arrow buttons to adjust the target temperature. Each press changes the temperature by 1°F/°C. The adjustable range is 59°F–94°F (15°C–34°C).
3. Cloi'n awtomatig: After 3 seconds of inactivity, the system will automatically lock the settings to prevent accidental changes.

Switching between Fahrenheit (°F) and Celsius (°C):

Long press the °F/°C button for 1-3 seconds to toggle between Fahrenheit and Celsius display modes.

Swyddogaeth Cof:

The heater is equipped with a memory function that automatically restores your previously set temperature settings after a power interruption, ensuring consistent warmth for your aquatic pets.

Fideo Cynnyrch:

5. Nodweddion Diogelwch

The AQQA Aquarium Heater incorporates advanced safety systems to protect your aquatic environment.

Amddiffyniad gorboethi:

If the water temperature rapidly exceeds 95°F (35°C), the LED screen on the controller will flash “EE” and the heater will automatically stop heating to prevent harm to your fish and equipment.

Amddiffyniad Rhedeg Sych:

If the aquarium heater is not fully submerged in water, the controller will display “Er” and automatically power off. This prevents the heater from operating dry, which could cause damage or fire hazards.

6. cynnal

Regular maintenance ensures the longevity and efficient operation of your AQQA Aquarium Heater.

• Glanhau: Unplug the heater and allow it to cool completely in the water (15-30 minutes) before removing. Gently wipe the heater's surface with a soft cloth to remove algae or mineral deposits. Do not use harsh chemicals or abrasive materials.
• Arolygiad: Periodically check the heater and its power cord for any signs of damage, cracks, or wear. Ensure the suction cups are securely holding the heater in place.
• Newidiadau Dŵr: Always unplug the heater during water changes to prevent dry-run activation or accidental damage.

7. Datrys Problemau

If you encounter any issues with your AQQA Aquarium Heater, refer to the following common problems and solutions:

8. manylebau

Detailed technical specifications for the AQQA Aquarium Heater 300W.

9. Gwarant a Chefnogaeth

For any questions, technical support, or warranty inquiries regarding your AQQA Aquarium Heater, please contact AQQA customer service. Refer to your product packaging or the official AQQA websafle am y wybodaeth gyswllt ddiweddaraf.

Rydym wedi ymrwymo i ddarparu cynhyrchion o ansawdd uchel a gwasanaeth cwsmeriaid rhagorol.