Gwybodaeth Ddiogelwch Bwysig
RHYBUDD: Gallai methu â dilyn y rhybuddion a'r cyfarwyddiadau hyn arwain at anaf difrifol neu farwolaeth.
- Defnyddiwch y system atal bob amser.
- Peidiwch byth â gadael plentyn heb oruchwyliaeth.
- Osgoi anaf difrifol rhag cwympo neu lithro allan.
- Do not carry more than one child in the stroller.
- Do not overload the storage basket or accessory pockets.
- Sicrhewch fod yr holl ddyfeisiau cloi yn cael eu defnyddio cyn eu defnyddio.
- Do not use the stroller if any parts are broken or missing.
- Maximum weight capacity for the child is 22.5 kg (49.6 lbs).
- Maximum weight capacity for the storage basket is 4.5 kg (10 lbs).
- Cadwch blant i ffwrdd o rannau symudol yn ystod yr addasiad.
- Nid yw'r cynnyrch hwn yn addas ar gyfer rhedeg neu sglefrio.
Cynnwys Pecyn
Gwiriwch fod yr holl eitemau a restrir isod wedi'u cynnwys yn eich pecyn:
- Ingenuity 3Dquickclose CS+ Stroller Frame
- Bar Bumper Symudadwy
- Basged Storio
- 5-Point Safety Harness (pre-installed)
- Gorchudd Glaw
- Oversize Canopy (pre-installed)
Gosod
1. Dadblygu'r Cadair Wthio
- Rhowch y stroller wedi'i blygu ar arwyneb gwastad.
- Release any locking latches that secure the stroller in its folded position.
- Lift the handlebar firmly until the stroller frame fully extends and locks into place. Listen for an audible click.
- Ensure all frame locks are securely engaged before placing a child in the stroller.
Delwedd: Ochr view of the Ingenuity 3Dquickclose CS+ Stroller, showing its full size when unfolded.
2. Attaching the Bumper Bar
- Locate the attachment points on both sides of the stroller frame near the seat.
- Align the bumper bar with these points and push until it clicks securely into place.
- To remove, press the release buttons on each side and pull the bumper bar away.
Delwedd: Blaen view of the stroller, highlighting the attached bumper bar and the 5-point harness.
Cyfarwyddiadau Gweithredu
1. Defnydd Cyffredinol
The Ingenuity 3Dquickclose CS+ Stroller is designed for daily use and travel, providing comfort and safety for your child.
Image: A woman pushing the stroller with a child, demonstrating typical use.
2. Folding the Stroller (3Dquickclose Technology)
The 3Dquickclose technology allows for a rapid, one-handed fold.
- Ensure the child is removed from the stroller.
- Locate the quick-close mechanism (usually a handle or button) on the handlebar.
- Activate the mechanism and push the handlebar forward or downward, allowing the stroller to collapse.
- Secure the stroller with the auto-lock latch if present.
Image: A person folding the stroller, showcasing its compact design when collapsed.
3. Addasu'r Sedd yn Gorwedd
The seat can be fully reclined for newborns and adjusted as your child grows.
- Locate the recline adjustment mechanism, typically a lever or strap behind the seat.
- To recline, squeeze the lever or loosen the strap and gently push the seat back.
- To raise, pull the seat forward while adjusting the mechanism until the desired position is reached.
- Ensure the seat is securely locked in place before use.
Image: Close-up of a hand adjusting the seat recline, showing the mechanism for different positions.
4. Diogelu Eich Plentyn gyda'r Harnais 5 Pwynt
Always use the 5-point safety harness to secure your child.
- Rhowch eich plentyn yn y sedd.
- Bring the shoulder straps over your child's shoulders and the waist straps around their waist.
- Insert the two buckle prongs into the center buckle until they click.
- Adjust the straps to ensure a snug fit, leaving no more than one finger's width between the strap and your child.
- To release, press the button on the center buckle.
Image: Close-up of the 5-point harness buckle being fastened, ensuring child safety.
5. Using the Oversize Canopy and Storage
The stroller features an extra-large adjustable canopy with a window and a visor for sun protection, along with ample storio.
- Canopi: Extend or retract the canopy as needed for sun and wind protection. Use the peek-a-boo window to check on your child.
- Basged Storio: The large basket located under the seat provides space for essentials. Do not exceed the maximum weight capacity of 4.5 kg (10 lbs).
- Accessory Pocket: A convenient pocket is located on the canopy for small items like a phone or keys.
Image: Close-up of the canopy's accessory pocket, demonstrating its use for small personal items.
6. Attaching the Rain Cover
The included rain cover provides protection from wet weather.
- Unfold the rain cover.
- Drape it over the stroller, ensuring it covers the entire seating area and canopy.
- Secure the cover using any attached fasteners or elastic edges to prevent it from blowing off.
Image: The stroller with its transparent rain cover installed, ready for inclement weather.
7. Car Seat Compatibility
The Ingenuity 3Dquickclose CS+ Stroller is compatible with various car seats from brands such as Britax, Maxi Cosi, and Nuna. Car seat adapters are sold separately.
Refer to the car seat manufacturer's instructions for proper installation and use with the stroller.
Cynnal a chadw
Cyfarwyddiadau Glanhau
- Ffabrig: Wipe fabric surfaces with a damp lliain a sebon ysgafn. Sychwch yn yr awyr. Peidiwch â channu.
- Ffrâm: Wipe the metal and plastic parts of the frame with a soft, damp brethyn. Sychwch yn drylwyr.
- Olwynion: Periodically clean wheels and axles of dirt and debris. Lubricate moving parts with a silicone-based lubricant if necessary.
- Gorchudd Glaw: Sychwch yn lân gyda hysbysebamp cloth. Ensure it is completely dry before folding and storing to prevent mildew.
Storio
Store the stroller in a clean, dry place away from direct sunlight and extreme temperatures to prevent damage to materials.
Datrys problemau
| Problem | Achos Posibl | Ateb |
|---|---|---|
| Stroller does not fold or unfold easily. | Locking mechanisms are not fully disengaged or engaged. Debris in moving parts. | Ensure all locks are released before folding/unfolding. Check for obstructions and clear them. Lubricate moving parts if necessary. |
| Wheels are stiff or squeaky. | Dirt or debris in wheel axles. Lack of lubrication. | Clean wheels and axles thoroughly. Apply a silicone-based lubricant to moving parts. |
| Mae'n anodd bwcl neu ddadfwcl harnais. | Buckle prongs are misaligned or dirty. | Ensure prongs are clean and aligned correctly before inserting. Do not force the buckle. |
Manylebau
| Rhif Model | 17419-090 |
| Dimensiynau Cynnyrch (Heb blygu) | 92 x 52.07 x 104.78 cm (36.2 x 20.5 x 41.25 modfedd) |
| Dimensiynau Plygedig | <92 cm x 52 cm x 105 cm |
| Pwysau Cynnyrch | 8.64 kg (19.05 pwys) |
| Uchafswm Pwysau Plentyn | 22.5 kg (49.6 pwys) |
| Cyfansoddiad Deunydd | 55% Fabric, 25% Plastic, 20% Metal |
| Math Harnais | 5-Pwynt |
| Math Olwyn | 4 Olwyn |
| Sedd Car yn Gydnaws | Yes (adapters sold separately) |
Gwybodaeth Gwarant
Ingenuity products are manufactured to high-quality standards. For specific warranty details, please refer to the warranty card included with your purchase or visit the official Ingenuity websafle. Cadwch eich prawf prynu ar gyfer hawliadau gwarant.
Cefnogaeth i Gwsmeriaid
For further assistance, replacement parts, or to view additional product information, please contact Ingenuity customer service or visit our official store.
Siop Ar-lein: Ingenuity Official Store on Amazon
