homary Japanese Style Queen Floor Bed Frame Instruction Manual

Cynnyrch Drosview

The homary Japanese Style Queen Floor Bed Frame (Model JJ90B477N0) is a low-profile platform bed designed to accommodate a standard Queen mattress (60" W x 80" L) without the need for a box spring. It features a wood-finished metal frame and carbon steel slats for mattress support. The design is inspired by traditional Japanese tatami style, offering a minimalist aesthetic.

Image: Fully assembled homary Japanese Style Queen Floor Bed Frame with a mattress, showcasing ei fod yn isel-brofile design in a bedroom setting.

Gwybodaeth Diogelwch

Darllenwch a deallwch yr holl rybuddion diogelwch cyn eu cydosod a'u defnyddio. Gall methu â dilyn y cyfarwyddiadau hyn arwain at anaf neu ddifrod i'r cynnyrch.

• Exercise caution around sharp edges during assembly to prevent cuts.
• Be aware of the bed's low height to prevent tripping hazards, especially in dimly lit areas.
• Due to the product's weight (approximately 99.2 lbs), exercise care when moving or assembling. It is recommended to have two people for assembly and relocation.
• Ensure all fasteners are securely tightened before use and periodically check for tightness.
• Do not exceed the recommended weight capacity of the bed frame.

Cynnwys Pecyn

Gwiriwch fod yr holl gydrannau yn bresennol cyn dechrau cydosod. Os oes unrhyw rannau ar goll neu wedi'u difrodi, cysylltwch â chymorth cwsmeriaid.

Rhestr Rhannau:

• Side Rails (A)
• End Rails (B)
• Center Support Legs (C)
• Center Support Beam (D)
• Corner Brackets (E)
• Slats (F) - 42 pieces

Rhestr Caledwedd:

• AA: Bolts with washers (x4)
• BB: Bolts with washers (x8)
• CC: Threaded rods (x4)
• DD: Corner plates (x4)
• EE: Washers (x8)
• FF: Nuts (x4)
• GG: Wooden dowels (x8)
• HH: Screws (x42)
• Tools: Allen wrench, Wrench

Cyfarwyddiadau Cymanfa

Follow these steps carefully for proper assembly. It is recommended to assemble the bed frame with two people.

1. Step 1: Attach Center Support Legs to Center Support Beam.

   Place the Center Support Beam (D) on a flat surface. Attach the four Corner Brackets (E) to the beam using bolts (BB) and washers (EE). Ensure they are securely fastened.

   

   Image: Close-up of the wood-finished metal frame, showing a corner detail.

2. Step 2: Install Threaded Rods into End Rails.

   Insert the four threaded rods (CC) into the pre-drilled holes on the End Rails (B). Hand-tighten them until snug.

3. Step 3: Insert Wooden Dowels.

   Insert the eight wooden dowels (GG) into the corresponding holes on the End Rails (B).
4. Step 4: Connect Side Rails and End Rails.

   Connect the Side Rails (A) to the End Rails (B) by aligning the wooden dowels and threaded rods. Gently push the pieces together to form the rectangular frame.

   

   Image: The bed frame fully assembled, showing the wooden frame structure before slats are installed.

5. Step 5: Secure Frame Corners.

   Attach the four Corner Plates (DD) to the inside corners of the frame. Secure them using bolts (AA) and washers (EE). Use the provided wrench to tighten the nuts (FF) onto the threaded rods from Step 2, ensuring a firm connection.
6. Step 6: Place and Secure Slats.

   Carefully place the Slats (F) onto the assembled frame. Ensure they are evenly spaced and rest properly on the support ledges. Use the screws (HH) to secure each slat to the frame.

   

   Delwedd: Manwl view of the carbon steel slats providing mattress support within the bed frame.

Once all steps are completed, ensure the frame is stable and all fasteners are tight. The bed frame is now ready for your mattress.

Defnydd a Gweithrediad

This bed frame is designed for use with a Queen-sized mattress (60" W x 80" L). No box spring is required as the carbon steel slats provide adequate support for various mattress types, including futon, memory foam, and hybrid mattresses.

• Lleoliad Matres: Carefully place your Queen mattress directly onto the assembled slats.
• Isel Profile Dyluniad: The 6.3-inch low-profile design offers a grounded sleeping experience. Consider your preferred mattress height for optimal comfort.

Image: Technical drawing illustrating the dimensions of the Queen floor bed frame, including length, width, and height.

Image: A person sitting on the low-profile bed frame, illustrating its height relative to the floor.

Cynnal a chadw

Bydd cynnal a chadw rheolaidd yn helpu i ymestyn oes ac ymddangosiad ffrâm eich gwely.

• Glanhau: Wipe the wood-finished metal frame with a soft, damp brethyn. Osgowch gemegau llym neu lanhawyr sgraffiniol a allai niweidio'r gorffeniad.
• Gwiriad Fastener: Gwiriwch yr holl folltau a sgriwiau o bryd i'w gilydd i sicrhau eu bod yn parhau'n dynn. Ail-dynhau os oes angen i gynnal sefydlogrwydd.
• Osgoi lleithder gormodol: Protect the bed frame from prolonged exposure to moisture or direct sunlight to prevent warping or fading.

Datrys problemau

If you encounter issues with your bed frame, refer to the following common solutions:

• Sŵn Gwichian: Squeaking often indicates loose connections. Re-tighten all bolts and screws on the frame and slats. Ensure the bed frame is on a level surface.
• Ansefydlogrwydd/Siglo: Check that all frame components are correctly aligned and securely fastened. Verify that the floor is even.
• Symudiad Slatiau: Ensure all screws securing the slats are fully tightened. If slats continue to shift, verify they are correctly positioned within the frame's support ledges.

Manylebau

Image: The Homary Japanese Style Bed Frame integrated into a minimalist bedroom, highlighting its aesthetic appeal.

Gwarant a Chefnogaeth

For warranty information, missing parts, or any questions regarding your homary Japanese Style Queen Floor Bed Frame, please contact homary customer support.

Canolfan Gofal Cwsmer: Available for questions.

Amser gwasanaeth: Replies typically within 24 hours.

E-bost: service@homary.com

When contacting support, please provide your order number for faster assistance.

Image: Homary customer service contact details, including email and response time.