1. Cynnyrch Drosview
The Insoma Water Timer SGW01 is designed to automate your garden and lawn watering, providing convenience and efficient water management. This 1-zone outdoor hose timer features Auto, Manual, and Rain Delay modes, along with a Child Lock function for enhanced control and safety.
Nodweddion Allweddol:
- Rhaglennu Hawdd: Customize start time, watering frequency (every 1-23 hours or 1-15 days), and duration (1-360 minutes).
- Dyfrio â Llaw: Initiate watering on demand without altering preset schedules.
- Oedi Glaw: Pause scheduled watering for 1 to 15 days to conserve water during rainfall.
- Clo Plant: Prevents accidental changes to programming.
- Arddangosfa LCD fawr: Clear display of current time, start time, frequency, duration, next watering time, and battery level.
- Dyluniad Gwydn: IPX5 waterproof rating, anti-UV coating, anti-rust materials, and a sealed battery cover for outdoor use.
- Gosodiad Heb Offeryn: Features a 360° swivel inlet and metal filter.
Figure 1: Insoma Water Timer SGW01 with highlighted features.
2. Gosod
Follow these steps to properly install your Insoma Water Timer.
- Gosod Batri:
- Lleolwch yr adran batri ar gefn yr amserydd.
- Open the compartment and insert two (2) AA 1.5V Alkaline batteries (not included), ensuring correct polarity (+/-).
- Close the battery compartment securely to maintain the waterproof seal. The timer is designed to run for over 6 months on a fresh set of batteries.
- Atodwch i'r tap:
- Gwnewch yn siŵr bod eich tap awyr agored wedi'i ddiffodd.
- Thread the timer's inlet connector onto your standard outdoor garden faucet. The 360° swivel inlet allows for easy positioning. Hand-tighten only; do not overtighten.
- Verify that the metal filter is properly seated in the inlet to prevent debris from entering the timer.
- Pibell Cyswllt:
- Connect your garden hose to the outlet of the water timer. Hand-tighten to ensure a secure, leak-free connection.
- Trowch y Dŵr ymlaen:
- Slowly turn on your outdoor faucet completely. The timer requires water pressure to operate correctly (0.5 Bar to 8 Bar / 7.25 psi to 116 psi).
- Gwiriwch am unrhyw ollyngiadau yn y cysylltiadau.
Figure 2: The Insoma Water Timer automates watering, eliminating the need for manual intervention.
3. Operating Modes and Programming
The Insoma Water Timer offers flexible programming options to suit various watering needs.
3.1 Gosod yr Amser Cyfredol
Before programming, ensure the current time is set accurately.
- Press the 'SET OK' button to enter the setting mode.
- Defnyddiwch y botymau '+' a '-' i addasu'r awr a'r munud.
- Press 'SET OK' to confirm each setting and move to the next.
- Press 'ESC MANUAL' to exit the setting mode.
3.2 Automatic Watering (Cycle Mode)
Program your timer for automatic, scheduled watering.
Figure 3: Hour and Day Cycle Modes for automatic watering frequency.
- Gosod Amser Cychwyn:
- Press 'SET OK' until 'START TIME' flashes on the display.
- Use '+' and '-' to set your desired watering start time.
- Press 'SET OK' to confirm.
- Gosod Hyd Dyfrio:
- When 'WATERING DURATION' flashes, use '+' and '-' to set the length of each watering cycle (1 to 360 minutes).
- Press 'SET OK' to confirm.
- Gosod Amlder Dyfrio:
- When 'WATERING FREQUENCY' flashes, use '+' and '-' to choose how often watering occurs. You can select from every 1 to 23 hours, or every 1 to 15 days.
- Press 'SET OK' to confirm.
- Press 'ESC MANUAL' to save settings and exit programming. The timer will now operate according to your schedule.
3.3 Dyfrhau â Llaw
Use manual mode for immediate, unscheduled watering without affecting your programmed schedule.
Figure 4: Manual watering can be activated anytime for flexible use.
- Press the 'ESC MANUAL' button once. The display will show 'MANUAL'.
- Use the '+' and '-' buttons to set the desired manual watering duration (1 to 360 minutes).
- Press 'SET OK' to start manual watering. The timer will run for the set duration and then return to its automatic schedule.
- To stop manual watering prematurely, press 'ESC MANUAL' again.
3.4 Modd Oedi Glaw
Pause your watering schedule during rainy periods to prevent overwatering and conserve water.
Figure 5: Activate Rain Delay to pause watering for up to 15 days.
- In normal operating mode, press and hold the '+' button for 3 seconds. The display will show 'DELAY' and a number of days.
- Use the '+' and '-' buttons to select the desired delay duration (1 to 15 days).
- Press 'SET OK' to confirm the rain delay. The timer will pause for the selected period and automatically resume its programmed schedule afterward.
- To cancel rain delay prematurely, press and hold the '+' button again for 3 seconds.
3.5 Swyddogaeth Clo Plant
Activate the Child Lock to prevent accidental changes to your watering program.
Figure 6: Child Lock prevents unintended program modifications.
- To activate Child Lock, press and hold the '-' button for 5 seconds until a lock icon appears on the screen.
- To deactivate Child Lock, press and hold the '-' button again for 5 seconds until the lock icon disappears.
4. cynnal
Proper maintenance ensures the longevity and optimal performance of your water timer.
- Glanhau: Periodically clean the metal filter located in the inlet to prevent blockages. Remove the timer from the faucet, take out the filter, rinse it under running water, and reinsert it.
- Amnewid Batri: Replace batteries when the low battery indicator appears on the LCD screen. Always use new AA 1.5V Alkaline batteries.
- Storio Gaeaf: Before the first frost, disconnect the water timer from the faucet and hose. Drain any remaining water from the unit. Store the timer indoors in a dry, frost-free location. Remove batteries if storing for extended periods.
5. Datrys Problemau
Cyfeiriwch at yr adran hon am atebion i broblemau cyffredin.
| Problem | Achos Posibl | Ateb |
|---|---|---|
| Timer does not turn on/LCD is blank. | Dim batris na batris marw. | Install new AA 1.5V Alkaline batteries, ensuring correct polarity. |
| Nid yw dŵr yn llifo. | Faucet is off; low water pressure; clogged filter; incorrect program. | Ensure faucet is fully open. Check water pressure (must be 0.5-8 Bar). Clean the metal filter. Verify program settings. |
| Timer leaks at connections. | Loose connection; missing/damaged washer. | Hand-tighten connections. Ensure rubber washers are properly seated and undamaged. Replace if necessary. |
| Timer not watering at scheduled time. | Incorrect program; Rain Delay active; Child Lock active. | Review and adjust program settings. Check if Rain Delay is active and cancel if needed. Deactivate Child Lock. |
| Mae'r arddangosfa'n anodd ei darllen. | Batri isel. | Amnewid batris. |
6. manylebau
- Model: SGW01
- Parthau: 1
- Deunydd: Plastic Inlet and Outlet
- Amrediad Pwysedd Dŵr: 0.5 Bar - 8 Bar (7.25 psi - 116 psi)
- Hyd Dyfrio: 1 minute - 360 minutes
- Amlder Dyfrio: Bob 1-23 awr neu Bob 1-15 diwrnod
- Oedi Glaw: 1-15 diwrnod
- Ffynhonnell Pwer: 2 x AA 1.5V Alkaline Batteries (not included)
- Bywyd batri: Approximately 6+ months
- Sgôr dal dŵr: IPX5
- Dimensiynau Cynnyrch: 4.6"D x 4.6"W x 2"H
- Pwysau Eitem: 0.6 Bunt
7. Gwarant a Chefnogaeth
Insoma products are designed for reliability and performance. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Insoma websafle. Cadwch eich derbynneb prynu fel prawf o brynu ar gyfer hawliadau gwarant.
