RGBlink NDI PTZ Camera Controller (RGBBKT) User Manual

1. Rhagymadrodd

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of the RGBlink NDI PTZ Camera Controller (RGBBKT). This device is designed for professional video production environments, offering comprehensive control over various PTZ cameras using multiple protocols.

Image 1.1: RGBlink NDI PTZ Camera Controller (RGBBKT).

2. Gosod

Follow these steps to set up your RGBlink NDI PTZ Camera Controller.

2.1 Dadbacio ac Archwiliad Cychwynnol

• Tynnwch yr holl gydrannau o'r pecyn yn ofalus.
• Gwiriwch fod yr holl eitemau a restrir yn y rhestr bacio yn bresennol.
• Inspect the controller for any signs of physical damage. If damage is found, contact your dealer immediately.

2.2 Cysylltu'r Rheolwr

The RGBlink NDI PTZ Camera Controller supports various connection methods for power and camera control.

• Pwer dros Ethernet (PoE): Connect a single RJ45 Ethernet cable from a PoE-enabled network switch to the controller's LAN port. This provides both power and network connectivity.
• Addasydd pŵer allanol: If PoE is not available, connect the provided power adapter to the DC 12V input port and to a power outlet.
• Cysylltiadau Camera:
  • Ethernet (IP Control): Connect PTZ cameras to the same network as the controller via RJ45 Ethernet cables. The controller supports VISCA over IP, ONVIF v2.42, and NDI v5.5 protocols.
  • Serial Control: For cameras supporting serial communication, use RS232, RS422, or RS485 interfaces. Connect the appropriate cables from the controller's serial ports to the cameras.

Image 2.1: Rear panel connections including RS-232, RS-422, LAN (PoE), and Power Input.

Delwedd 2.2: Enghraifftample connection diagram showing PTZ Controller, PoE Switch, PTZ Cameras, Audio Mixer, and Computer.

Image 2.3: Diagram illustrating IP camera connections via a network switch.

2.3 Ffurfweddiad Rhwydwaith

For IP-based camera control, ensure the controller and cameras are on the same network segment. The controller supports automatic detection of NDI-enabled PTZ cameras.

• Access the controller's web rhyngwyneb trwy nodi ei gyfeiriad IP yn a web browser. (Refer to the device's display or network tools to find the IP address).
• The default login credentials are typically 'admin' with a blank password. It is recommended to set a strong password immediately.
• O fewn y web interface, configure camera protocols (e.g., ONVIF, VISCA over IP) and enter camera-specific user credentials if required.

Image 2.4: NDI|HX camera search and control interface on the controller.

3. Gweithrediad

This section details the operational functions of the RGBlink NDI PTZ Camera Controller.

3.1 Drosview o Reolaethau

The controller features a 3.49" LCD display, a 3D joystick, various knobs, and a numeric keypad for intuitive control.

Image 3.1: The controller's 3.49-inch LCD display.

Delwedd 3.2: Manwl view of the 3D joystick and multi-function knobs.

Image 3.3: Layout of the controller's buttons and numeric keypad area.

3.2 Dewis Camera

• Botymau Dewis Cyflym: Use the dedicated CAM 1-5 buttons for quick selection of up to 5 cameras.
• Bysellbad rhifol: For cameras beyond the quick select buttons (up to 255), press the ID CAM button, then enter the camera number using the numeric keypad, and press ENWCH.

Image 3.4: The controller's ability to manage multiple cameras.

3.3 Rheolaeth PTZ

• ffon reoli: The 3D joystick controls pan (left/right), tilt (up/down), and zoom (rotate the joystick).
• Knob Cyflymder PT: Adjusts the gimbal movement speed for pan and tilt.
• Zoom Knob: Provides precise zoom control, especially useful in preview modd.

3.4 Image Parameter Adjustment

• IRIS/SHUTTER Knob: Rotate to adjust aperture and shutter speed. Press to switch control modes.
• R/B GAIN Knob: Rotate to adjust red and blue gain. Press to switch control modes.
• FOCUS Button: Gwasgwch y FFOCWS AUTO button to switch the camera to auto focus mode.
• EXPOSURE Button: Cycles through exposure modes (Aperture Priority, Shutter Priority, Gain Priority, Manual Exposure, Auto Exposure).
• Botwm GOLEUAD CEFN: Toggles the camera's backlight mode.
• WHITE BALANCE CYCLE Button: Cycles through white balance modes (Indoor, Outdoor, Manual, Auto).
• ONE PUSH TRIGGER Button: When white balance is set to "One-Push White Balance", press this button to initiate a one-push white balance calibration.

Image 3.5: Functions of buttons and knobs on the left side of the controller.

Image 3.6: Functions of buttons and knobs on the right side of the controller, including preset controls.

3.5 Rhagosodiad

• SET PRESET Button: Press to enter preset position mode. Use the numeric keys to enter the preset number (0-9) and press ENWCH i achub. Gwasgwch ESC i ymadael.
• CALL PRESET Button: Press to enter preset recall mode. Use the numeric keys to enter the preset number (0-9) and press ENWCH to recall. Press ESC i ymadael.
• The controller supports saving and recalling up to 255 presets per camera.

3.6 Llywio Dewislen

• Botwm BWYDLEN: Press to open or close the camera settings menu. In menu control mode, the joystick controls navigation (up, down, left, right), ENWCH confirms selections, and ESC acts as a back button.

4. cynnal

Proper maintenance ensures the longevity and optimal performance of your RGBlink NDI PTZ Camera Controller.

4.1 Glanhau

• Use a soft, dry cloth to clean the exterior of the controller.
• Ar gyfer baw ystyfnig, ychydig yn dampgolchwch y brethyn gyda dŵr neu doddiant glanhau ysgafn, nad yw'n sgraffiniol.
• Avoid using harsh chemicals, solvents, or abrasive materials, as these can damage the surface and display.
• Ensure no liquids enter the device through openings or ports.

4.2 Storio

• Pan nad yw'n cael ei ddefnyddio am gyfnodau hir, storiwch y rheolydd mewn lle oer, sych i ffwrdd o olau haul uniongyrchol a thymheredd eithafol.
• Amddiffyn y ddyfais rhag llwch a lleithder.

5. Datrys Problemau

Mae'r adran hon yn darparu atebion i broblemau cyffredin y gallech ddod ar eu traws.

5.1 Dim Pŵer

• Gwiriwch y ffynhonnell pŵer: Ensure the power adapter is securely connected to both the controller and a working power outlet.
• PoE Check: If using PoE, verify that the Ethernet cable is connected to a PoE-enabled port on your network switch and that the switch is powered on.
• Uniondeb Cebl: Inspect the power cable and Ethernet cable for any damage.

5.2 Cannot Control Camera

• Cysylltedd Rhwydwaith: For IP cameras, ensure the controller and cameras are on the same network and can communicate. Check network cables and IP addresses.
• Camgymhariad Protocol: Verify that the correct control protocol (e.g., VISCA over IP, ONVIF, NDI, Pelco-D/P) is selected on both the controller and the camera.
• ID y camera: Ensure the correct camera ID is selected on the controller.
• Manylion mewngofnodi: If the camera requires authentication, confirm that the correct username and password are configured in the controller's web rhyngwyneb.
• Cysylltiad Cyfresol: For serial control, check RS232/RS422/RS485 cable connections and ensure baud rates and addresses match between the controller and camera.
• Firmware: Ensure both the controller and cameras have the latest firmware installed. Visit the RGBlink support websafle am ddiweddariadau.

5.3 LCD Display Issues

• Dim Arddangosfa: Gwnewch yn siŵr bod y rheolydd wedi'i bweru ymlaen.
• Arddangosfa Dim: Check if there are any brightness settings on the controller that can be adjusted.

6. manylebau

Image 6.1: Controller dimensions and typical usage environments.

Image 6.2: Visual representation of supported protocols including RJ45, RS485, RS422, RS232, ONVIF, NDI, Pelco-D, Pelco-P, and Visca.

7. Arddangosiad Fideo Cynnyrch

Watch the official product video for a visual demonstration of the RGBlink NDI PTZ Camera Controller's features and operation.

8. Gwarant a Chefnogaeth

For warranty information, technical support, or service inquiries, please contact RGBlink customer service or visit their official websafle.

• Gwneuthurwr: Xiamen RGBlink Science & Technology Co.,Ltd.
• Swyddogol Websafle: www.rgblink.com (Nodyn: Mae hwn yn ddaliwr lle URL, please refer to your product packaging or official documentation for the correct support websafle.)
• Gwybodaeth Gyswllt: Refer to the RGBlink official website for the most current contact details for technical support and warranty claims.