Einhell Professional GP-PS 18/20 Li BL-Solo Power X-Change Cordless Pruning Saw

1. Cynnyrch Drosview

The Einhell Professional GP-PS 18/20 Li BL-Solo is a versatile and compact cordless pruning saw designed for cutting back and shaping trees and shrubs, shredding green waste, and cutting small sections of wood. As part of the Einhell Power X-Change family, it is compatible with all batteries and chargers from this series. This tool features a brushless motor for enhanced power and extended operating time compared to traditional carbon brush motors. Its compact and lightweight design, combined with a 15 cm cutting length and a chain speed of up to 8 m/s, makes it ideal for flexible garden use.

Figure 1: The Einhell Professional GP-PS 18/20 Li BL-Solo cordless pruning saw, shown with a compatible Power X-Change battery.

2. Cyfarwyddiadau Diogelwch

Always observe the following safety precautions when operating the pruning saw to prevent injury and damage.

Rhybuddion Diogelwch Cyffredinol

• Darllenwch y Llawlyfr: Thoroughly read and understand all instructions and safety warnings before use.
• Gwisgwch Offer Diogelu Personol (PPE): Always wear safety glasses, hearing protection, gloves, and sturdy footwear.
• Cadwch yr Ardal Waith yn Glir: Ensure the work area is free from obstacles, debris, and bystanders.
• Osgoi Amodau Gwlyb: Do not operate the pruning saw in rain or damp amgylcheddau.
• Darn Gwaith Diogel: Always ensure the material being cut is stable and cannot shift during operation.
• Two-Hand Operation: Always hold the pruning saw firmly with both hands during operation.
• Atal Cic yn Ôl: Be aware of potential kickback and avoid cutting with the tip of the guide bar.

3. Cydrannau Cynnyrch

Familiarize yourself with the main components of your cordless pruning saw:

Figure 2: Labeled diagram highlighting key features and components of the pruning saw.

• Guide Bar and Chain: High-quality cutting components for precise cuts.
• Gard dwylo: Integrated for user safety during operation.
• Foldable Chain Cover: Provides additional safety and protection.
• Modur di-frws: Delivers powerful and efficient performance.
• Tool-Free Chain Tensioning Knob: For easy adjustment of chain tension.
• Cronfa Olew: For automatic chain lubrication.
• Ergonomic Handle with Softgrip: Ensures comfortable and secure handling.

4. Gosod a Chynulliad

4.1. Gosod Batri

1. Ensure the pruning saw is switched off.
2. Align the Power X-Change battery with the battery slot on the tool.
3. Llithrwch y batri i'r slot nes ei fod yn clicio'n ddiogel yn ei le.
4. I'w dynnu allan, pwyswch y botwm rhyddhau ar y batri a'i llithro allan.

4.2. Guide Bar and Chain Assembly

1. Place the guide bar onto the mounting studs.
2. Carefully fit the chain around the sprocket and into the guide bar groove. Ensure the cutting edges of the chain are facing the correct direction.
3. Close the chain cover and secure it.

Figure 3: Proper installation of the guide bar and chain.

4.3. Tensiwn y Gadwyn

The pruning saw features tool-free chain tensioning for convenience.

1. Loosen the locking knob on the side of the saw.
2. Turn the red adjustment knob to increase or decrease chain tension. The chain should be snug against the guide bar but still able to be pulled freely by hand.
3. Once tension is correct, tighten the locking knob firmly.

Ffigur 4: Addasu tensiwn y gadwyn gan ddefnyddio'r bwlyn di-offeryn.

4.4. Filling the Oil Reservoir for Automatic Lubrication

The pruning saw has an automatic chain lubrication system. Ensure the oil reservoir is filled before each use.

1. Locate the oil reservoir cap.
2. Unscrew the cap and use the provided filling funnel to pour appropriate chain oil into the reservoir.
3. Peidiwch â gorlenwi. Rhowch y cap yn ôl yn ddiogel.

Figure 5: Filling the oil reservoir for automatic chain lubrication.

5. Gweithrediad

5.1. Dechrau a Stopio

• To start: Press the safety lock-off button and then squeeze the trigger switch.
• I stopio: Rhyddhewch y switsh sbardun.

5.2. Technegau Torri

Always maintain a firm grip with both hands. Position yourself securely and ensure the workpiece is stable.

• Pruning Branches: Support the branch if necessary to prevent it from pinching the chain. Make relief cuts if the branch is heavy.
• Torri Boncyffion: Place the log on a stable surface or sawhorse. Avoid cutting into the ground.
• Osgowch gicio’n ôl: Never cut with the tip of the guide bar. Always use the bottom edge of the guide bar for cutting.

Figure 6: Demonstrating the pruning saw in action, cutting a log.

6. Cynnal a Chadw a Gofal

Regular maintenance ensures optimal performance and extends the life of your pruning saw.

6.1. Glanhau

• Tynnwch y batri bob amser cyn glanhau.
• Use a brush or compressed air to remove sawdust and debris from the guide bar, chain, and motor housing.
• Sychwch y tu allan gyda hysbysebamp brethyn. Peidiwch â defnyddio cemegau llym.

6.2. Hogi a Newid Cadwyn

• A dull chain reduces cutting efficiency and increases kickback risk. Sharpen the chain regularly or replace it when necessary.
• The chain and guide bar can be replaced without tools by following the assembly instructions in Section 4.2.

6.3. Oiling System Check

• Regularly check the oil level in the reservoir.
• Ensure the automatic lubrication system is functioning by observing oil spray from the chain during operation.

7. Canllaw Datrys Problemau

Cyfeiriwch at y tabl hwn am broblemau cyffredin a'u datrysiadau:

8. Manylebau Technegol

9. Gwarant a Chymorth i Gwsmeriaid

Einhell offers a 10-year warranty on the brushless motor after online registration. For warranty claims, technical assistance, or spare parts, please contact Einhell customer support.

Cyswllt Gwneuthurwr:
Eschenstr. 6
94405 Landau an der Isar
Almaen

Please visit the official Einhell website for the most up-to-date contact information and warranty registration details.