Rhagymadrodd
This manual provides detailed instructions for the proper use and maintenance of your Jesebang BD86 Wireless Earbuds. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.
Beth Sydd yn y Bocs
- Bluetooth Earbuds (2 units)
- Cas Gwefru (1 uned)
- Cebl Gwefru Math-C (1 uned)
- Llawlyfr Defnyddiwr (1 uned)
Cynnyrch Drosview
Familiarize yourself with the components of your Jesebang BD86 Wireless Earbuds.
Delwedd: Drosoddview of the earbud and charging case, highlighting Mic 1, LED Indicator, Mic 2, Charging PIN on the earbud, and the LED Dual Digital Display and Type-C Input on the charging case.
- Clustffonau: Each earbud features a microphone (Mic 1, Mic 2), an LED indicator, and charging pins.
- Achos Codi Tâl: Equipped with an LED Dual Digital Display to show battery levels and a Type-C input for charging.
Gosod
1. Gwefru'r Clustffonau a'r Cas
Cyn ei ddefnyddio gyntaf, gwefrwch y clustffonau a'r cas gwefru yn llawn.
- Rhowch y ddau earbuds yn yr achos gwefru.
- Cysylltwch y cebl gwefru Math-C â'r porthladd gwefru ar y cas a ffynhonnell bŵer.
- The LED display on the case will show the charging status. A full charge takes approximately 1 hour for the earbuds. The case provides up to 30 hours of additional playback time.
Delwedd: The charging case with earbuds, illustrating the LED digital display for battery levels.
2. Pâr Bluetooth
Follow these steps to pair your earbuds with your device.
- Sicrhewch fod y clustffonau wedi'u gwefru.
- Agorwch y cas gwefru. Bydd y clustffonau'n mynd i mewn i'r modd paru yn awtomatig, a bydd eu dangosyddion LED yn fflachio.
- On your device (phone, tablet, laptop), enable Bluetooth.
- Chwiliwch am available Bluetooth devices and select "BD86" from the list.
- Once connected, the earbud LED indicators will stop flashing.
Delwedd: Bluetooth pairing process, showing the earbuds connected to a smartphone.
Cyfarwyddiadau Gweithredu
The BD86 earbuds feature smart touch controls for various functions.
Delwedd: Smart Touch Control diagram for the earbuds.
| Swyddogaeth | Gweithred |
|---|---|
| Pŵer Ymlaen / Diffodd | Pwyswch a daliwch y glustffon Chwith/Dde am 4 eiliad. |
| Chwarae/Seibiant Cerddoriaeth | Tap L/R earbud once (2S). |
| Can nesaf | Tap Right earbud twice (X2). |
| Caniad Blaenorol | Tap Left earbud twice (X2). |
| Ateb/Diwedd Galwad | Tap L/R earbud twice (X2). |
| Gwrthod Galwad | Pwyswch a daliwch y glustffon Chwith/Dde am 2 eiliad. |
| Actifadu Cynorthwyydd Llais (Siri/Cynorthwyydd Google) | Tap L/R earbud three times (X3). |
| Cyfrol i Fyny | Tap Right earbud once. |
| Cyfrol Lawr | Tap Left earbud once. |
Cynnal a chadw
Glanhau
Mae glanhau rheolaidd yn helpu i gynnal ansawdd sain a hylendid.
- Defnyddiwch frethyn meddal, sych, heb lint i sychu'r clustffonau a'r cas gwefru.
- Peidiwch â defnyddio glanhawyr sgraffiniol, toddyddion na chwistrellau aerosol.
- Gently clean the earbud mesh and charging contacts with a dry cotton swab if necessary.
Gwrthiant Dŵr (IPX7)
The earbuds are rated IPX7 waterproof, meaning they can withstand immersion in water up to 1 meter for 30 minutes. This makes them suitable for workouts and protection against sweat and rain.
Delwedd: Earbuds and case with water droplets, demonstrating IPX7 water resistance.
Pwysig: The charging case is not waterproof. Ensure the earbuds are dry before placing them back into the charging case to prevent damage.
Datrys problemau
| Problem | Ateb Posibl |
|---|---|
| Clustffonau ddim yn paru | Ensure earbuds are charged. Turn off and on your device's Bluetooth. Forget "BD86" from your device's Bluetooth list and re-pair. |
| Dim ond un earbud yn gweithio | Place both earbuds back into the charging case, close the lid, then open it again. Ensure both earbuds are charged. Re-pair with your device. |
| Ansawdd sain gwael | Ensure earbuds are clean and free of debris. Check the audio source device. Move closer to your device to avoid interference. |
| Clustffonau ddim yn codi tâl | Ensure charging cable is securely connected. Check the charging contacts on both earbuds and case for any obstructions. Try a different Type-C cable or power adapter. |
| Mae rheolyddion cyffwrdd yn anymatebol | Ensure your fingers are clean and dry. Restart the earbuds by placing them in the case and taking them out. |
Manylebau
| Nodwedd | Manylyn |
|---|---|
| Enw Model | BD86 |
| Fersiwn Bluetooth | 5.4 |
| Technoleg Cysylltedd | Di-wifr |
| Maint Gyrrwr Sain | Gyrwyr Dynamig 14.2 mm |
| Rheoli Sŵn | ENC Canslo Sŵn |
| Graddfa Gwrthiant Dŵr | IPX7 |
| Bywyd Batri Earbud | Hyd at 6 awr (un tâl) |
| Cyfanswm Amser Chwarae (gyda chas) | Hyd at 36 awr |
| Amser Codi Tâl | Tua. 1 awr |
| Porthladd Codi Tâl | Math-C |
| Dull Rheoli | Cyffwrdd |
| Pwysau (pob clustffon) | 3.4 gram |
| Amrediad Bluetooth | Hyd at 15 metr |
Gwarant a Chefnogaeth
Jesebang products are designed for reliability and performance.
Gwybodaeth Gwarant
Daw'r cynnyrch hwn gyda a Gwarant 2 mlynedd o ddyddiad y pryniant. Mae'r warant hon yn cwmpasu diffygion gweithgynhyrchu a chrefftwaith o dan ddefnydd arferol. Nid yw'n cwmpasu difrod a achosir gan gamddefnydd, damweiniau, addasiadau heb awdurdod, na thraul a rhwyg arferol.
Cefnogaeth i Gwsmeriaid
For technical assistance, warranty claims, or any questions regarding your Jesebang BD86 Wireless Earbuds, please contact our customer support team. Refer to the contact information provided on the product packaging or the official Jesebang websafle.