Electactic Commercial Ice Maker (101LBS/DAY)

Rhagymadrodd

Thank you for choosing the Electactic Commercial Ice Maker. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new ice machine. Please read these instructions thoroughly before installation and use, and retain them for future reference.

Figure 1: Electactic Commercial Ice Maker and included accessories.

Cyfarwyddiadau Diogelwch

• Sicrhewch fod y ddyfais wedi'i seilio'n gywir.
• Peidiwch â gweithredu'r peiriant iâ gyda llinyn pŵer neu blwg wedi'i ddifrodi.
• Cadwch y peiriant iâ i ffwrdd o ffynonellau gwres a golau haul uniongyrchol.
• Allow the unit to stand upright for at least 24 hours before initial use to allow refrigerant to settle.
• Defnyddiwch ddŵr yfedadwy yn unig ar gyfer cynhyrchu iâ.
• Peidiwch â storio sylweddau ffrwydrol fel caniau aerosol gyda thanwydd fflamadwy yn y teclyn hwn.
• Nid yw'r teclyn hwn wedi'i fwriadu i'w ddefnyddio gan bersonau (gan gynnwys plant) sydd â galluoedd corfforol, synhwyraidd neu feddyliol llai, neu ddiffyg profiad a gwybodaeth, oni bai eu bod wedi cael goruchwyliaeth neu gyfarwyddyd ynghylch defnyddio'r offer gan berson sy'n gyfrifol am eu diogelwch.
• Dylid goruchwylio plant i sicrhau nad ydynt yn chwarae gyda'r teclyn.

Cynnyrch Drosview

The Electactic Commercial Ice Maker is designed for high-efficiency ice production, featuring a durable stainless steel construction and an intuitive LED digital display. It produces up to 101 lbs of ice per 24 hours with a storage capacity of 33 lbs.

Cydrannau Allweddol:

• Ice Maker Unit (Stainless Steel Casing)
• LED Digital Control Panel
• Ice Storage Bin (33 lbs capacity)
• Scoop Iâ
• Pibell Mewnfa Ddŵr
• Pibell Draenio
• Traed Addasadwy

Gosod

1. Dadbacio a Lleoli:

1. Tynnwch yr holl ddeunyddiau pecynnu yn ofalus.
2. Place the ice maker on a firm, level surface. Ensure there is adequate ventilation around the unit (at least 5 inches of space on all sides).
3. Allow the unit to stand upright for a minimum of 24 hours before plugging it in. This allows the refrigerant to stabilize.

2. Cysylltiad Dŵr:

The ice maker supports two methods for water supply:

Figure 2: Water inlet options for the ice maker.

• Direct Tap Water Connection: Connect the provided water inlet hose to a potable water supply and the designated inlet on the ice maker. Ensure all connections are secure to prevent leaks.
• Bottled Water Connection: For bottled water, connect the appropriate adapter and hose to a water bottle (e.g., 5-gallon) and the ice maker's water inlet.

3. Drainage Connection:

Connect the drainage hose to the unit's drain outlet and route it to a suitable drain or container. Ensure the drainage hose is positioned lower than the ice maker's drain outlet for proper water flow.

4. Glanhau Cychwynnol:

Before first use, it is recommended to clean the interior of the ice maker. Refer to the "Maintenance" section for detailed cleaning instructions. After cleaning, perform a self-cleaning cycle.

Cyfarwyddiadau Gweithredu

1. Panel Rheoli Drosview:

Figure 3: LED Digital Control Panel.

• Botwm YMLAEN/DIFFODD: Powers the unit on or off. Press and hold to force ice to fall off.
• Botwm AMSERYDD/GLANHAU: Activates the timer function or initiates the self-cleaning cycle (press and hold for 5 seconds).
• Botwm '+': Increases settings (e.g., ice thickness, timer duration).
• Botwm '-': Decreases settings (e.g., ice thickness, timer duration).
• Arddangosfa LED: Shows current status, temperature, error codes, and timer settings.

2. Starting Ice Production:

1. Ensure the water supply is connected and the drain hose is properly positioned.
2. Plygiwch y gwneuthurwr iâ i mewn i soced drydanol wedi'i seilio.
3. Gwasgwch y YMLAEN / I FFWRDD button to start the unit. The machine will automatically begin the ice-making cycle.
4. The first batch of ice may take slightly longer. The unit can produce approximately 45 ice cubes in 12-18 minutes.

Figure 4: Ice production capacity.

3. Adjusting Ice Thickness:

Gallwch addasu trwch y ciwb iâ i gyd-fynd â'ch dewis:

Figure 5: Ice thickness adjustment options.

• While the machine is operating, use the '+' a '-' buttons to cycle through thickness settings.
• A shorter freezing time results in thinner ice, ideal for smoothies.
• A longer freezing time results in thicker ice, suitable for cooling drinks or retaining freshness.

4. Using the Timer Function:

The 24-hour timer allows you to schedule when the ice maker starts or stops operation.

1. Gwasgwch y AMSERYDD/GLÂN button once to activate the timer setting.
2. Defnyddiwch y '+' a '-' buttons to set the desired delay time (in hours) for the unit to turn on or off.
3. Cadarnhewch y gosodiad trwy wasgu'r AMSERYDD/GLÂN button again or waiting a few seconds for it to auto-confirm.

5. Ice Storage:

The ice storage bin is insulated to help preserve ice for a short period. For extended storage, transfer ice to a freezer, as this machine is not a refrigerator and cannot maintain ice in a frozen state indefinitely.

Cynnal a chadw

1. Auto Self-Cleaning Function:

The ice maker features an automatic self-cleaning function to simplify maintenance.

Figure 6: Self-cleaning cycle in progress.

1. Ensure the unit is connected to a water supply and the drain hose is properly set up.
2. Pwyswch a dal y AMSERYDD/GLÂN button for 5 seconds. The display will indicate the cleaning cycle has started.
3. The self-cleaning process takes approximately 30 minutes. Do not interrupt the cycle.
4. Once complete, the unit will automatically switch off or return to standby mode.

2. Glanhau Rheolaidd:

• Tu allan: Wipe the stainless steel exterior with a soft cloth and mild detergent. Avoid abrasive cleaners.
• Tu mewn: Periodically clean the ice storage bin and other accessible interior surfaces with a solution of warm water and mild soap. Rinse thoroughly and ensure all soap residue is removed.
• System Dŵr: For optimal performance and hygiene, consider using a descaling solution specifically designed for ice makers every few months, especially in areas with hard water. Follow the descaling product's instructions carefully.

3. Draining the Unit:

To drain the water from the unit, locate the drain plug at the bottom of the machine. Place a container beneath it, remove the plug, and allow all water to drain. Reinsert the plug securely after draining.

Datrys problemau

Manylebau

Figure 7: Product dimensions and typical applications.

Gwarant a Chefnogaeth

For warranty information and customer support, please refer to the warranty card included with your product or visit the official Electactic brand store. You can typically find support resources, FAQs, and contact information there.

Visit the Electactic Brand Store