Amazon Basics DS-HSM10-EU

Amazon Basics Steam Mop for Hard Floors

Model: DS-HSM10-EU

Rhagymadrodd

Thank you for choosing the Amazon Basics Steam Mop. This manual provides important information for the safe and efficient operation of your new steam mop. Please read it thoroughly before use and keep it for future reference. This 1200W steam mop is designed to effectively clean and sanitize sealed hard floors using only tap water, eliminating 99.9% of bacteria without harsh chemicals.

Gwybodaeth Diogelwch

Dilynwch ragofalon diogelwch sylfaenol bob amser wrth ddefnyddio offer trydanol i leihau'r risg o dân, sioc drydanol neu anaf.

  • Do not leave the steam mop unattended while plugged in.
  • Do not use the appliance on unsealed wooden floors or unglazed ceramic tiles, as steam can cause damage.
  • Cadwch y teclyn i ffwrdd oddi wrth blant ac anifeiliaid anwes.
  • Use only tap water in the water tank. Do not add cleaning solutions, perfumes, or other chemicals, as this may damage the appliance and void the warranty.
  • Always unplug the appliance before filling or emptying the water tank, or before performing maintenance.
  • Ensure the power cord is not damaged or tangled during use.

Cynnwys Pecyn

Gwiriwch fod yr holl eitemau yn bresennol ac mewn cyflwr da:

  • 1 x Amazon Basics Steam Mop
  • 3 x Washable Microfiber Pads
  • 1 x Filling Flask
  • 1 x Plastic Scrubber
Amazon Basics Steam Mop and accessories

Image: The complete cleaning kit, including the steam mop, three microfiber pads, a filling flask, and a plastic scrubber.

Cynnyrch Drosview

The Amazon Basics Steam Mop features a lightweight design with a self-standing function for convenient storage. It includes an extra-long 6m power cord with a cable management hook.

Amazon Basics Steam Mop standing upright

Image: The Amazon Basics Steam Mop in its upright, self-standing position.

Gosod

  1. Assemble the Mop: Cysylltwch yr handlen â phrif gorff y mop stêm nes ei bod yn clicio'n ddiogel yn ei lle.
  2. Attach Microfiber Pad: Place one of the washable microfiber pads onto the mop head, ensuring it is securely attached.
  3. Llenwch y tanc dŵr: Open the water tank cap. Use the provided filling flask to pour up to 450ml of clean tap water into the tank. Do not overfill. Close the cap securely.
Hand filling the water tank of the steam mop

Image: A hand pouring water into the steam mop's water tank using the provided filling flask.

Cyfarwyddiadau Gweithredu

  1. Pŵer Ymlaen: Plug the steam mop into a suitable electrical outlet. The indicator light will illuminate.
  2. Cynhesu: Wait approximately 30 seconds for the mop to heat up and produce steam.
  3. Dewiswch Lefel Stêm: The mop features 3 steam levels (high/medium/low). Select the appropriate level for your cleaning needs using the control button.
  4. Dechrau glanhau: Move the steam mop slowly and steadily across the sealed hard floor surface. The steam will clean and sanitize as you go. For stubborn spots, hold the mop over the area for a few seconds.
  5. Gorffen Glanhau: When finished, unplug the mop and allow it to cool down before emptying any remaining water and removing the microfiber pad.
Steam mop features: cleans sealed hard floors, heats in 30 seconds, 6.10m cable

Image: Key features of the steam mop, highlighting its ability to clean sealed hard floors without chemicals, quick 30-second heat-up time, and a 6.10m power cable for extended reach.

Cynnal a chadw

  • Cleaning Microfiber Pads: The microfiber pads are machine-washable. Wash them with similar colors and air dry. Do not use bleach or fabric softener.
  • Tanc Dŵr Gwag: After each use, ensure the water tank is emptied to prevent mineral buildup.
  • Storio: Store the steam mop in an upright position using its self-standing feature. Use the cable management hook to keep the power cord tidy.
  • Diraddio: If you notice reduced steam output, descaling may be necessary. Consult the full product manual for detailed descaling instructions.

Datrys problemau

ProblemAchos PosiblAteb
Dim stêm wedi'i gynhyrchuWater tank empty; Mop not plugged in; Mop not heated up.Fill water tank; Plug in mop; Wait 30 seconds for heat-up.
Mop leaves water marksMop moved too slowly; Too much steam for surface.Move mop at a consistent pace; Reduce steam level.
Allbwn stêm llaiCroniad mwynau yn y system.Perform descaling procedure (refer to full manual).

Manylebau

NodweddManylyn
Rhif ModelDS-HSM10-EU
Dimensiynau (pecyn)45.52 x 34.79 x 15.4 cm
Pwysau2.7 kg
Wattage1200 Gw
Cyfrol Tanc Dŵr450 ml
Amser Cynhesu30 eiliad
Hyd y llinyn pŵer6 m
Lefelau Steam3 (Uchel/Canolig/Isel)
LliwGwyn
GwneuthurwrAmazon
Gwlad TarddiadTsieina

Gwarant a Chefnogaeth

Your Amazon Basics Steam Mop is covered by a limited warranty. For detailed information regarding warranty terms, conditions, and how to obtain support, please refer to the warranty card included in your product packaging or visit the official Amazon Basics website. For technical assistance or customer service inquiries, please contact Amazon customer support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.