Rhagymadrodd
This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your Biling 8W Solar Pond Aerator. This device is designed to provide oxygen to outdoor small ponds, koi ponds, and fish tanks using solar power with a battery backup system.

The Biling 8W Solar Pond Aerator operating in a pond, demonstrating its solar-powered functionality.
Cynnwys Pecyn
Gwiriwch fod yr holl gydrannau yn bresennol cyn dechrau'r gosodiad:
- Solar Air Pump Unit
- Panel Solar
- Air Hoses (2)
- Air Stones (2)
- Ground Stake and Mounting Bracket
- T-connector for air hoses
- Screws and Wall Plugs for mounting

All components of the Biling Solar Pond Aerator, including dimensions for the solar panel and pump unit.
Cyfarwyddiadau Gosod
- Lleoliad Panel Solar: Choose a location for the solar panel that receives direct sunlight for the majority of the day. The panel can be mounted using the provided ground stake or wall-mounted with screws. Ensure the panel is angled to maximize sun exposure.
- Cysylltiad Pwmp Aer: Connect the solar panel cable to the air pump unit. The air pump unit contains a 4400mAh battery for nighttime operation.
- Air Hose and Air Stone Installation: Attach the two air hoses to the outlets on the air pump. Connect an air stone to the end of each hose. Place the air stones at the desired depth in your pond or tank. Ensure hoses are not kinked.
- Tâl Cychwynnol: Allow the solar panel to charge the battery for at least 8 hours in direct sunlight before initial use, especially if operating in battery backup modes.

Mewnol view of the aerator unit, highlighting the 4400mAh battery and dual air pumps.
Fideo Arddangos Gosod
This video demonstrates the setup and operation of the 8W solar aerator for outdoor ponds.
Dulliau Gweithredu
The Biling 8W Solar Pond Aerator features three distinct working modes to suit various oxygenation needs and extend battery life:
- Strong Bubble Mode: Provides continuous, strong aeration. Ideal for situations requiring maximum oxygen. Expected working time on a full charge is approximately 24 hours (22 GPH).
- Soft Bubble Mode: Offers gentler, continuous aeration. Suitable for maintaining oxygen levels with reduced power consumption. Expected working time on a full charge is approximately 48 hours (11 GPH).
- 10S ON/OFF Bubble Mode: Operates in a cycle of 10 seconds on, 10 seconds off. This intermittent mode conserves battery power, providing the longest operational duration. Expected working time on a full charge is approximately 72 hours.
To switch between modes, press the mode button on the air pump unit. The indicator lights will change to reflect the selected mode.

Visual representation of the three distinct bubble modes for the aerator.

The aerator's air stones generating abundant bubbles to oxygenate the water.
Cynnal a chadw
Regular maintenance ensures optimal performance and longevity of your solar pond aerator:
- Glanhau paneli solar: O bryd i'w gilydd sychwch wyneb y panel solar gyda meddal, damp lliain i gael gwared â llwch, baw a malurion. Mae panel glân yn sicrhau'r amsugno mwyaf o olau haul ac effeithlonrwydd gwefru.
- Arolygiad Cerrig Aer: Check the air stones regularly for blockages caused by algae or mineral buildup. Clean them by gently scrubbing with a brush or replacing them if heavily clogged to maintain consistent bubble output.
- Archwiliad pibell: Ensure the air hoses are free from kinks, cracks, or damage that could restrict airflow. Replace damaged hoses as needed.
- Pump Unit Placement: Keep the air pump unit in a dry, protected location, away from direct water immersion, to prevent damage.

The aerator contributing to improved water quality in a pond environment.
Datrys problemau
If you encounter issues with your Biling Solar Pond Aerator, refer to the following common problems and solutions:
| Problem | Achos Posibl | Ateb |
|---|---|---|
| No bubbles or weak bubbles | Insufficient sunlight for solar panel | Relocate solar panel to an area with direct, unobstructed sunlight. Clean the solar panel surface. |
| No bubbles or weak bubbles | Air stones are clogged | Clean or replace the air stones. |
| No bubbles or weak bubbles | Air hoses are kinked or blocked | Straighten any kinks in the hoses. Check for internal blockages. |
| No bubbles at night | Battery is not sufficiently charged or depleted | Ensure the solar panel receives adequate sunlight during the day to charge the 4400mAh battery. Select a lower power mode (Soft Bubble or 10S ON/OFF) for extended nighttime operation. |
| Pump unit not functioning | Unit is damaged or defective | If all other troubleshooting steps fail, contact customer service for assistance. |
Manylebau
| Nodwedd | Manylyn |
|---|---|
| Brand | Bilio |
| Rhif Model | ZY080A |
| Ffynhonnell Pwer | Solar Powered |
| Horsepower / Wattage | 8 Wat |
| Gallu Batri | 4400mAh |
| Pympiau Awyr | 2 (Adeiledig) |
| Allfeydd Awyr | 2 |
| Dulliau Gweithio | 3 (Strong, Soft, 10S ON/OFF) |
| Max Working Time (Full Charge) | Hyd at 72 awr (yn dibynnu ar y modd) |
| Deunydd | Styren Biwtadïen Acrylonitrile (ABS) |
| Lliw | Du |
| Defnyddiau Penodol | Outdoor Pond Environments |
Gwarant a Chefnogaeth
The Biling 8W Solar Pond Aerator comes with a Gwarant 1 mlynedd o ddyddiad y pryniant. Mae'r warant hon yn cwmpasu diffygion gweithgynhyrchu ac yn sicrhau bod y cynnyrch yn rhydd o ddiffygion mewn deunydd a chrefftwaith o dan ddefnydd arferol.
If you experience any issues with your product or require technical assistance, please contact Biling customer service. Provide your purchase details and a description of the problem for prompt support.
For customer service inquiries, please refer to the contact information provided with your product packaging or visit the official Biling websafle.