Topaz RTL4-SQ-7W-CS-WH 4-inch Performance LED Recessed Retrofit Downlight Instruction Manual

1. Gwybodaeth Bwysig am Ddiogelwch

Please read and understand all instructions before beginning installation. Failure to follow these instructions may result in electric shock, fire, or other hazards that could cause property damage or personal injury.

• RHYBUDD: Risg o sioc drydanol. Datgysylltwch bŵer wrth y ffiws neu'r torrwr cylched cyn gosod neu wasanaethu.
• RHYBUDD: Risg tân. Dargludyddion cyflenwi o leiaf 90°C. Ymgynghorwch â thrydanwr cymwys i sicrhau dargludydd cylched cangen cywir.
• Rhaid i'r cynnyrch hwn gael ei osod yn unol â'r cod gosod cymwys gan berson sy'n gyfarwydd ag adeiladu a gweithredu'r cynnyrch a'r peryglon dan sylw.
• Yn addas ar gyfer lleoliadau gwlyb.
• Peidiwch â gwneud neu newid unrhyw dyllau agored mewn lloc gwifrau neu gydrannau trydanol yn ystod gosod y cit.
• Er mwyn atal difrod gwifrau neu abrasiad, peidiwch â datgelu gwifrau i ymylon metel dalen neu wrthrychau miniog eraill.

2. Cynnyrch Drosview

The Topaz RTL4-SQ-7W-CS-WH is a 4-inch square LED recessed retrofit downlight designed for both new construction and existing recessed housings. It features a CCT (Correlated Color Temperature) selectable switch, allowing users to choose from five color temperature options. This 7-watt LED fixture provides 90 CRI quality lighting and is dimmable.

Nodweddion Allweddol:

• Retrofit trim for 4-inch recessed housings.
• CCT field selectable switch to adjust between 5 color temperatures (2700K, 3000K, 3500K, 4000K, 5000K).
• Square baffle trim with a durable white finish.
• Dimmable LED functionality.
• High Color Rendering Index (CRI) of 90.
• Yn addas ar gyfer lleoliadau gwlyb.

3. Cynnwys Pecyn

Gwiriwch fod yr holl gydrannau yn bresennol cyn dechrau'r gosodiad:

• 1 x Topaz RTL4-SQ-7W-CS-WH LED Recessed Downlight
• 1 x E26 Adapter
• Cyswllt Cyflym

Image 1: The Topaz 4-inch square LED downlight shown with its included E26 adapter, ready for installation.

4. Gosod a Gosod

4.1 Cyn Gosod

Before starting, ensure you have the following tools and materials:

• Sgriwdreifer
• Stripwyr gwifren (os oes angen)
• Sbectol diogelwch
• Menig
• Existing 4-inch recessed housing

4.2 Camau Gosod

1. Diffodd Pŵer: Locate the circuit breaker or fuse box and turn off the power supply to the recessed lighting fixture you are replacing or installing. Verify power is off using a voltage profwr.
2. Remove Existing Trim (if applicable): Carefully remove the existing bulb and trim from the recessed housing.
3. Connect E26 Adapter: Screw the E26 adapter into the existing E26 socket within the recessed housing.
4. Connect Quick Connects: Plug the quick connect cable from the LED downlight into the quick connect cable from the E26 adapter. Ensure a secure connection.
5. Select CCT (Color Temperature): Before inserting the downlight into the housing, locate the CCT selectable switch on the back of the fixture. Choose your desired color temperature (2700K, 3000K, 3500K, 4000K, or 5000K) by sliding the switch.


Image 2: The back of the Topaz LED downlight showing the CCT selection switch and the connected E26 adapter. The friction clips are also visible.

6. Mewnosod Goleuadau i Lawr: Gently push the LED downlight into the 4-inch recessed housing. The friction clips on the sides of the downlight will secure it in place. Ensure the trim is flush with the ceiling.
7. Adfer Pwer: Trowch y pŵer yn ôl ymlaen wrth y torrwr cylched neu'r blwch ffiwsiau.
8. Prawf: Trowch y switsh golau ymlaen i wirio ei fod yn gweithredu'n iawn.

5. Cyfarwyddiadau Gweithredu

5.1 CCT Color Selection

The Topaz RTL4-SQ-7W-CS-WH features a CCT selectable switch located on the back of the fixture. This switch allows you to choose from five different color temperatures to suit your preference or application:

• 2700K: Warm White (similar to incandescent)
• 3000K: Gwyn Meddal
• 3500K: Gwyn Niwtral
• 4000K: Gwyn Cwl
• 5000K: Golau dydd

To change the CCT, you must first remove the fixture from the recessed housing and then slide the switch to the desired setting. Reinstall the fixture after selection.

Delwedd 3: Llun agos view of the CCT selection switch on the back of the downlight, showing the five selectable color temperature options.

5.2 Swyddogaeth Pylu

This LED downlight is dimmable. For optimal performance, use with compatible LED-rated dimmers. Refer to your dimmer's instructions for proper installation and operation. Ensure the dimmer is suitable for LED loads.

6. cynnal

The Topaz RTL4-SQ-7W-CS-WH LED downlight requires minimal maintenance.

• Glanhau: Gwnewch yn siŵr bod y pŵer wedi'i ddiffodd cyn glanhau. Sychwch y gosodiad gyda lliain meddal, sych, neu ychydig yn feddal.amp cloth. Do not use harsh chemicals, abrasive cleaners, or solvents, as these may damage the finish or electrical components.
• Dim Rhannau Defnyddiadwy i Ddefnyddwyr: There are no user-serviceable parts inside this fixture. Do not attempt to disassemble the unit.

7. Datrys Problemau

Os nad yw'r gosodiad yn gweithredu'n gywir, cyfeiriwch at y canllaw datrys problemau canlynol:

If the problem persists after attempting these solutions, contact a qualified electrician or the manufacturer's support.

8. manylebau

9. Gwarant a Chefnogaeth

This product is manufactured by Topaz and is subject to their standard warranty terms and conditions. Please refer to the official Topaz websafle neu cysylltwch â'u gwasanaeth cwsmeriaid i gael gwybodaeth fanwl am y warant.

For technical assistance, troubleshooting, or warranty claims, please contact Topaz customer support directly. Contact information can typically be found on the manufacturer's websafle neu becynnu cynnyrch.