1. Rhagymadrodd
This instruction manual provides detailed guidance for the NEEWER Z2-N 2.4G TTL Round Head Flash Speedlite. Designed for Nikon cameras, this speedlite offers advanced features such as 76Ws flash power, 1/8000s High-Speed Sync (HSS), and a user-friendly interface. Please read this manual thoroughly to ensure proper operation and to maximize the performance of your device.

Image 1.1: NEEWER Z2-N Flash Speedlite and included accessories.
2. Gosod
2.1 Cynnwys Pecyn
- 1 x NEEWER Z2-N Flash Speedlite
- 1 x Batri Lithiwm
- 1 x Half Dome Diffuser
- 1 x Achos Amddiffynnol
- 1 x Stand Mini
- 1 x Cebl USB

Image 2.1: Contents of the NEEWER Z2-N package.
2.2 Gosod a Gwefru Batri
- Lleolwch yr adran batri ar ochr yr uned fflach.
- Insert the provided 7.2V/3000mAh lithium-ion battery, ensuring correct polarity.
- Caewch y clawr adran batri yn ddiogel.
- To charge the battery, connect the included USB Type-C cable to the flash unit's charging port and a 5V/2A USB power adapter (not included). A full charge typically takes approximately 2.5 hours.

Image 2.2: The 7.2V/3000mAh lithium battery with USB Type-C charging port.
2.3 Gosod ar y Camera
- Slide the flash unit onto your Nikon camera's hot shoe.
- Secure the flash by rotating the hot shoe lock mechanism until it is firmly attached.
3. Cyfarwyddiadau Gweithredu
3.1 Pŵer Ymlaen/Diffodd
Press and hold the power button (usually marked with a lightning bolt symbol) to turn the flash unit on or off.
3.2 Mode Selection (TTL/M Toggle)
The Z2-N features an upgraded user interface and a dedicated TCM key for quick mode switching.
- TTL Auto Mode: The flash automatically determines the appropriate light output for correct exposure.
- Modd Llaw (M): Allows manual adjustment of flash output from 1/1 (full power) to 1/256.
- TCM Key: Press the TCM key to instantly switch between TTL and Manual modes, retaining the TTL metering memory for fine-tuning.
- Multi Strobe Flash: Ar gyfer tynnu lluniau lluosog o bwnc symudol mewn un ffrâm.

Image 3.1: The TCM Quick Switch for rapid mode changes.

Image 3.2: The enhanced user interface for clear display of settings.
3.3 Flash Exposure Control
The Z2-N supports various exposure control functions:
- Automatic Metering: In TTL mode, the flash automatically adjusts output.
- Iawndal Amlygiad Fflach (FEC): Adjust flash output relative to the camera's metered exposure.
- Flash Exposure Bracketing (FEB): Takes multiple shots at different flash exposure levels.
- Clo Amlygiad Fflach (FEL): Yn cloi gwerth amlygiad y fflach.

Image 3.3: TTL Auto Flash automatically adjusts for accurate exposure.
3.4 Flash Head Adjustment and Zoom
The circular Fresnel flash head offers flexible positioning and light shaping:
- troi: The flash head can swivel 0-330 degrees.
- Tilt: The flash head can tilt -7 to 120 degrees.
- Chwyddo Awtomatig/Llawlyfr: The flash coverage can be automatically or manually adjusted for lenses between 28-105mm to match the focal length.

Image 3.4: The magnetic dome diffuser provides even, soft light.
3.5 Modelu L.amps
The Z2-N includes two upgraded 2W 3300K LED modeling lamps (one below the flash head) with 10 adjustable brightness levels (01-10). These lamps assist in previewing light effects and focusing.

Image 3.5: Dual modeling lights with 10 adjustable brightness levels.
3.6 Wireless Operation (2.4G Q System)
The Z2-N integrates with the NEEWER 2.4G Q Wireless System, allowing for flexible off-camera flash control.
- Grwpiau: Control four groups (A/B/C/D).
- Channels & IDs: Utilize 32 channels and 99 IDs for interference-free operation.
- Pellter Trosglwyddo: Up to 328 feet (100 meters) in open areas.
- Cydnawsedd: Can be used as a master or slave unit for Q system flashes. Compatible with QPRO-N TTL transmitters (not included) and Godox 2.4G X system (RX COMPAT menu) as a slave.
- Nodyn: Q and X systems cannot be used simultaneously. Ensure the latest firmware is installed for optimal compatibility.

Delwedd 3.6: Drosoddview of the built-in 2.4G NEEWER Q System.
3.7 Advanced Flash Functions
- Sync Cyflymder Uchel (HSS): Supports shutter speeds up to 1/8000s, allowing for flash use in bright ambient light or with wide apertures.
- Cydamseru Llen Blaen/Cefn: Yn cydamseru'r fflach â dechrau neu ddiwedd amlygiad y caead.
- Moddau Caethwas Optegol S1/S2: Allows the Z2-N to be triggered by another flash unit optically.

Image 3.7: High-Speed Sync for outdoor supplemental lighting.
4. cynnal
4.1 Glanhau
Use a soft, dry cloth to clean the flash unit. Avoid using harsh chemicals or abrasive materials, which can damage the surface or electronic components.
4.2 Gofal Batri
To prolong battery life, store the lithium-ion battery in a cool, dry place when not in use. Avoid exposing the battery to extreme temperatures. If the flash will not be used for an extended period, it is recommended to remove the battery.
4.3 Diweddariadau Firmware
Firmware updates may be released to improve performance or add new features. These updates can be installed via the USB Type-C port on the flash unit. Refer to the NEEWER official websafle ar gyfer y cadarnwedd a'r cyfarwyddiadau diweddaraf.
5. Datrys Problemau
- Fflach ddim yn tanio:
- Ensure the battery is charged and correctly installed.
- Check that the flash is securely mounted on the camera's hot shoe.
- Verify camera and flash settings are compatible (e.g., flash enabled, correct mode selected). - Amlygiad anghyson:
- In TTL mode, ensure the subject is within the effective flash range.
- In Manual mode, adjust the flash power output as needed.
- Check for any obstructions between the flash and the subject. - Problemau cysylltiad diwifr:
- Confirm that the master and slave units are set to the same group, channel, and ID.
- Reduce the distance between the units and ensure no major obstructions.
- Check battery levels on both transmitter and receiver units. - Flash head not moving smoothly:
- Ensure no debris is obstructing the swivel or tilt mechanisms.
- Do not force the flash head if resistance is met.
6. manylebau
| Nodwedd | Manyleb |
|---|---|
| Model | Z2-N |
| Maximum Flash Power | 76Wau |
| Sylw Flash | 28-105mm (Automatic/Manual Zoom) |
| Rotating Angle of Light Head | 0-330° |
| Light Head Tilt Angle | -7-120 ° |
| Hyd Fflach | 1/180e - 1/20000e |
| Flash Light Color Temperature | 5600K (±200K) |
| System Rheoli Amlygiad | TTL auto flash, Manual flash |
| Synchronous Method | High-speed sync (up to 1/8000s), Front/Rear curtain synchronization |
| Swyddogaeth Di-wifr | Master, Slave, OFF |
| Main Control Unit Group | A, B, C |
| Controlled Subordinate Unit Group | A, B, C, D, E (group E can use the QPRO series of flashes to control) |
| Ystod Trosglwyddo | 328ft / 100m (no obstacles) |
| Sianel | 32 groups (01-32) |
| ID | 01-99 |
| Modelu Pŵer Golau | 2W |
| Modelu Tymheredd Lliw Golau | 3300K |
| Effective Range (Modeling Light) | Central: 0.6-10 m / Edge: 0.6-5m |
| Batri | Batri lithiwm 7.2V / 3000mAh |
| Number of Full Power Flashes | Tua. 600 gwaith |
| Synchronous Trigger | Hot shoe, 2.5mm synchronous line |
| Dimensiynau | 2.9" x 2.9" x 8.1" / 76 x 76 x 206mm |
| Pwysau (gan gynnwys batri) | 1.27 pwys / 580g |
7. Cydweddoldeb
The NEEWER Z2-N Flash Speedlite is compatible with a wide range of Nikon cameras, including but not limited to:
- Nikon Z9, Z8, Zfc, Z50, Z30, Z5, Z6, Z7, Z6II, Z7II
- Nikon D4, D5, D6, D60, D70S, D90, D100, D200, D300, D610, D700, D750, D780, D800, D850
- Nikon D3100, D3200, D3300, D3400, D3500, D5000, D5100, D5200, D5300, D7100, D7500
Nodyn: This flash is NOT compatible with Nikon D810.

Image 7.1: NEEWER Z2-N mounted on a Nikon camera.
8. Gwarant a Chefnogaeth
This product is covered by a manufacturer's warranty. For warranty details, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official NEEWER website. Contact information for customer support can typically be found on the product packaging or the NEEWER brand websafle.





