WallarGe Wireless Headphones for TV Watching - Instruction Manual

Rhagymadrodd

Thank you for choosing WallarGe Wireless Headphones. These headphones are designed to provide a high-quality audio experience for TV watching and other Bluetooth-enabled devices, offering comfort and convenience with a long-range connection and no audio delay. This manual will guide you through the setup, operation, and maintenance of your new headphones.

Image: WallarGe Wireless Headphones and USB Transmitter.

Beth Sydd yn y Bocs

• Clustffonau Di-wifr
• USB Trosglwyddydd
• Cebl sain (3.5mm)
• Ceblau Sain RCA
• USB Extension Cord

Gosod

The WallarGe Wireless Headphones offer versatile connectivity options for your television and other devices. Please follow the instructions below based on your TV's capabilities.

Connecting to TV via USB (for TVs supporting USB Audio Out)

Approximately 40% of TVs with USB ports support audio decoding directly through the USB port. If your TV supports this feature, follow these steps:

1. Plug the USB Transmitter into an available USB port on your TV. Ensure the green signal light on the transmitter illuminates.
2. Turn on your WallarGe Wireless Headphones.
3. The headphones and transmitter are pre-paired from the factory. Audio should automatically transmit to your headphones.

Image: The USB transmitter connected to a USB port. This connection requires the USB port to support audio output.

Connecting to TV using Audio Cables (for TVs without USB Audio Out)

If your TV's USB port does not support audio output (approximately 60% of TVs), or if you experience low/muddy sound, you will need to use one of the supplied audio cables in conjunction with the USB transmitter for power. The USB transmitter will still need to be plugged into a 5V USB power source (e.g., TV USB port, USB wall adapter) to function.

Choose the appropriate cable based on your TV's available audio output ports:

• Cebl Optegol: Connect the optical cable from your TV's Optical Audio Out port to the Optical input on the USB transmitter.
• Cebl RCA: Connect the red and white RCA plugs from your TV's Audio Out (L/R) ports to the corresponding RCA inputs on the USB transmitter.
• Cebl AUX 3.5mm: Connect the 3.5mm AUX cable from your TV's Headphone Out or Audio Out port to the 3.5mm AUX input on the USB transmitter.

After connecting the audio cable, ensure the green signal light on the transmitter is on. Turn on your headphones. If you still experience issues, you may need to adjust your TV's audio settings. Set the TV's audio format to PCM (Pulse-code modulation). This headset does not support stereo sound or Dolby Digital formats.

Image: Various audio cables including Optical, RCA, and 3.5mm AUX, used for connecting the transmitter to the TV's audio output.

Delwedd: Example of a TV's audio settings menu, highlighting the option to set the digital audio output format to PCM.

Bluetooth Pairing (for other devices)

In addition to TV connectivity, these headphones feature Bluetooth 5.3, allowing connection to smartphones, tablets, and other Bluetooth-enabled devices.

1. Sicrhewch fod y clustffonau wedi'u pweru ymlaen.
2. Press the 'BT' button on the headphones to enter Bluetooth pairing mode. The indicator light will flash.
3. On your device, go to Bluetooth settings and select 'WallarGe HP007' from the list of available devices.
4. Once paired, the indicator light on the headphones will turn solid.

Image: WallarGe headphones being used with a smartphone, demonstrating Bluetooth connectivity.

Fideo Gosod Swyddogol

Cyfarwyddiadau Gweithredu

Pwer Ymlaen / Diffodd a Rheoli Cyfaint

• To power on the headphones, slide the 'OFF-ON-SIGNAL' switch to the 'ON' position.
• To power off, slide the switch to 'OFF'.
• Adjust volume using the '+' and '-' buttons located on the earcup.

Delwedd: Llun agos view of the headphone earcup, showing the power switch and volume controls.

Cysur a Ffit

The headphones feature an adjustable headband and soft cotton ear pads for extended comfort during use. Adjust the headband to fit your head comfortably.

Image: Diagram illustrating the comfortable earcups and adjustable headband of the headphones.

Long-Range Listening

The 2.4GHz transmitter provides a stable and reliable connection up to 100 feet (30 meters), allowing you to enjoy audio from your TV from a distance without interruption.

Image: A woman using the headphones while moving freely, demonstrating the 100-foot connection range from the TV.

Cynnal a chadw

• Clean the headphones and transmitter with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Osgoi amlygu'r ddyfais i dymereddau eithafol, lleithder neu olau haul uniongyrchol.
• Storiwch y clustffonau mewn lle oer, sych pan nad ydynt yn cael eu defnyddio.
• Peidiwch â cheisio dadosod neu atgyweirio'r ddyfais eich hun. Cysylltwch â chymorth cwsmeriaid am gymorth.

Datrys problemau

Manylebau

• Enw'r Model: Headphones (HP007)
• Technoleg Cysylltedd: Wireless (Bluetooth 5.3, RF 2.4GHz)
• Ystod Bluetooth: Hyd at 30 troedfedd (9 metr)
• Ystod RF: Hyd at 100 troedfedd (30 metr)
• Amrediad Amrediad: 20 Hz - 20,000 Hz
• Lleoliad Clust: Dros Glust
• Deunydd: Cotton (ear pads and headband)
• Ffynhonnell Pwer: 1 batri Ion Lithiwm (wedi'i gynnwys)
• Math o reolaeth: Rheoli Botwm
• Pwysau Eitem: 1.39 pwys (0.63 kg)
• Gwneuthurwr: ShenZhen litian technology Co.,Ltd

Gwarant a Chefnogaeth

For warranty information and customer support, please refer to the documentation included with your product packaging or visit the official WallarGe websafle. Gallwch hefyd gysylltu â'r gwerthwr yn uniongyrchol am gymorth.