RadioMaster Pocket Portable Remote Controller User Manual

1. Rhagymadrodd

This manual provides essential instructions for the setup, operation, and maintenance of your RadioMaster Pocket Portable Remote Controller. The RadioMaster Pocket is a compact and lightweight radio transmitter designed for remote control applications, featuring Hall Gimbals and pre-installed EdgeTX firmware. It is available in ExpressLRS or MPM CC2500 versions. Please read this manual thoroughly before using the device to ensure proper functionality and safety.

2. Cynnyrch Drosview a Nodweddion

The RadioMaster Pocket is engineered for portability and performance. Key features include:

• Dyluniad Compact: Portable and lightweight with removable stick ends and a foldable antenna for easy transport and storage.
• Hall Effect Gimbals: Equipped with Hall effect gimbals for precise control and smooth centering.
• EdgeTX Firmware: Comes pre-installed with EdgeTX firmware, offering extensive customization and functionality.
• Goleuadau LED Integredig: Built-in LED lights provide visual feedback for switch inputs.
• Sgrin LCD wedi'i oleuo'n ôl: A backlit LCD screen offers clear visibility of settings and telemetry data.
• Bae Modiwl Allanol: Compatible with RadioMaster Nano-size modules and TBS Nano Crossfire/Nano Tracer for expanded connectivity options.
• Cydnawsedd Batri: Designed for use with 18650 batteries (not included).

Ffigur 2.1: Blaen view of the RadioMaster Pocket Remote Controller, showcasing its transparent orange casing, gimbals, LCD screen, and control buttons.

Ffigur 2.2: Ongl view of the RadioMaster Pocket, highlighting the ergonomic design and the foldable antenna in its upright position.

3. Gosod

3.1 Dadbocsio a Chynnwys y Pecyn

Wrth agor y pecyn, gwiriwch fod yr holl gydrannau yn bresennol:

• RadioMaster Pocket Remote Controller
• Cwdyn Cario
• Cebl USB
• Cyfarwyddiadau Defnyddiwr (y ddogfen hon)
• Sticker Sheet (optional, for customization)

Nodyn: 18650 batteries are ddim cynnwys a rhaid eu prynu ar wahân.

Figure 3.1: Contents of the RadioMaster Pocket package, including the controller, carrying pouch, USB cable, and documentation.

3.2 Gosod Batri

1. Locate the battery compartment cover on the rear of the controller.
2. Tynnwch y clawr.
3. Insert two 18650 lithium-ion batteries, ensuring correct polarity (+/-). It is recommended to use flat-top 18650 batteries (65mm length) for optimal fit. Button-top batteries may be too long and cause difficulty in closing the compartment or damage.
4. Amnewid y clawr adran batri yn ddiogel.

Pwysig: Always use high-quality 18650 batteries and ensure they are fully charged before first use.

3.3 Gimbal and Stick End Adjustment

The RadioMaster Pocket features Hall effect gimbals for precise control. The stick ends are removable and can be adjusted or replaced according to user preference.

• To remove stick ends, gently unscrew them counter-clockwise.
• The removed stick ends can be stored in the designated slots on the back of the controller for safekeeping during transport.
• To reattach, screw them clockwise until snug. Do not overtighten.

Ffigur 3.2: Agos view of a gimbal stick, illustrating the textured, removable stick end.

Ffigur 3.3: Cefn view showing the storage slot for a removable stick end, designed for secure transport.

3.4 Antenna Deployment

The controller features a foldable antenna. Before operation, ensure the antenna is unfolded and positioned vertically for optimal signal transmission. Fold it down for compact storage.

3.5 Pŵer Cychwynnol Ymlaen

1. Press and hold the power button located on the front panel until the LCD screen illuminates.
2. The controller will boot into the EdgeTX firmware. Follow any on-screen prompts for initial setup, such as calibration or model selection.

4. Cyfarwyddiadau Gweithredu

4.1 EdgeTX Firmware Navigation

The RadioMaster Pocket runs on EdgeTX firmware, providing a powerful and customizable interface.

• Use the navigation buttons (scroll wheel, menu buttons) to move through menus and adjust settings on the backlit LCD screen.
• Refer to the official EdgeTX documentation for detailed instructions on advanced features, model setup, and customization.

4.2 Binding to a Receiver

To establish communication with your drone or RC vehicle, the controller must be bound to a compatible receiver. The binding process varies depending on the receiver type (ExpressLRS or CC2500).

1. Power on your receiver and place it in binding mode (refer to your receiver's manual for specific instructions).
2. On the RadioMaster Pocket, navigate to the Model Setup menu in EdgeTX.
3. Select the appropriate internal RF module (ExpressLRS or CC2500) and initiate the binding process.
4. Confirm successful binding on both the controller and receiver.

4.3 Rheolaeth Sylfaenol

• Gimbalau: Control primary flight surfaces (throttle, roll, pitch, yaw).
• Switsys: Assignable switches (e.g., SA, SB, SC, SD, SE, SF, SG, SH) are used for various functions like arming, flight modes, or special actions. The built-in LED lights provide visual confirmation of switch positions.
• Trimiau: Digital trims allow fine-tuning of control surfaces.
• Bae Modiwl Allanol: For use with compatible external modules to extend functionality or range.

Ffigur 4.1: Uchaf view of the RadioMaster Pocket, illustrating the various switches and the foldable antenna mechanism.

5. cynnal

• Glanhau: Defnyddiwch frethyn meddal, sych i lanhau tu allan y rheolydd. Osgowch lanhawyr neu doddyddion sgraffiniol.
• Storio: Store the controller in its carrying pouch in a cool, dry place away from direct sunlight and extreme temperatures. Ensure the antenna is folded and stick ends are removed and stored if desired.
• Diweddariadau Cadarnwedd: Regularly check the official RadioMaster or EdgeTX websites for firmware updates to ensure optimal performance and access to new features. Use the provided USB cable for updates.
• Gofal Batri: Remove batteries if the controller will not be used for an extended period. Store batteries in a safe, cool place.

6. Datrys Problemau

7. manylebau

• Dimensiynau Cynnyrch: 6.57 x 6.1 x 2.87 modfedd
• Pwysau Eitem: 1.15 pwys
• Rhif Model: Poced
• Gwneuthurwr: RadioMaster
• Brand (Seller): RotorLogic
• Nodwedd arbennig: ELRS (ExpressLRS version) or MPM CC2500 (Multi-protocol version)
• Uchafswm nifer y dyfeisiau â chymorth: 1 (fesul rhwymiad)
• Dyfeisiau Cydnaws: Drone FPV
• Technoleg Cysylltedd: Amlder Radio
• Firmware: EdgeTX (pre-installed)
• Gimbalau: Effaith y Neuadd
• Math o batri: 2 x 18650 (not included, flat-top recommended)

8. Gwarant a Chefnogaeth

For warranty information, technical support, or service inquiries, please contact the retailer where you purchased your RadioMaster Pocket Remote Controller or visit the official RadioMaster websafle. Cadwch eich prawf prynu ar gyfer hawliadau gwarant.

Gwneuthurwr: RadioMaster
Seller/Distributor: RotorLogic