WONLINK AC1200 Outdoor WiFi Extender User Manual

1. Rhagymadrodd

The WONLINK AC1200 Outdoor WiFi Extender is designed to provide robust and stable wireless network coverage in outdoor environments. Featuring dual-band technology (2.4GHz and 5GHz) and Power over Ethernet (PoE) support, this device is ideal for extending Wi-Fi to gardens, yards, farms, parks, and other large outdoor areas. Its IP66-rated weather-resistant casing ensures reliable performance in various challenging conditions.

2. Beth sydd yn y Bocs

• 1 * Outdoor Access Point
• 1 * 48V PoE Adapter
• 2 * Stainless Steel Ties
• 2 * Sgriwiau
• 2 * Silicone Gaskets
• 1 * Quick Installation Guide

3. Nodweddion Cynnyrch

• Dyluniad sy'n Gwrthsefyll Tywydd: Gradd IP66 casing protects the device from harsh outdoor conditions, including extreme cold, heat, and continuous humidity. Key components are sealed with waterproof glue.
• High-Speed Dual-Band Network: Complies with IEEE 802.11ac/a/b/g/n standards, offering maximum dual-band speeds of up to 867Mbps on 5GHz and 300Mbps on 2.4GHz. Ideal for HD streaming and online gaming.
• Dulliau Gweithredu Lluosog: Supports Repeater, AP (Access Point), Router, and Bridge modes to suit various network environments.
• Power Over Ethernet (PoE) & Dual Gigabit Ports: Integrated PoE allows flexible installation in areas without power outlets. Features dual Gigabit Ethernet (1000Mbps) LAN/WAN ports for excellent network speed.
• Stable Long-Range WiFi Coverage: Equipped with 2 high-gain external antennas and high-power PA+LNA amplifiers to extend WiFi signals and eliminate dead zones.

4. Canllaw Gosod

This section provides a step-by-step guide for setting up your WONLINK AC1200 Outdoor WiFi Extender. For a visual walkthrough, please refer to the official setup video below.

4.1. AP Mode Configuration Steps

1. Cysylltwch y ddyfais: Ensure correct cable connection and wait for the indicator light to turn on. Connect the device to your computer via Ethernet.
2. Connect to WONLINK WiFi: On your computer, connect to the WONLINK device's default WiFi signal (e.g., "WONLINK-XXXX-5G" or "WONLINK-XXXX-2G").
3. Mynediad Web Rhyngwyneb: Agor a web porwr a nodwch y cyfeiriad IP rhagosodedig 192.168.10.1 yn y bar cyfeiriad.
4. Mewngofnodi: Enter the default password "admin" to log in.
5. Dewiswch Modd AP: Navigate to "Wizard" and select "AP" mode.
6. Configure LAN Settings: In "Lan Settings", enter a new IP address. (Note: The first three groups of numbers of the IP address should be the same as your router's IP, but the last digit must be different.)
7. Ffurfweddu Gosodiadau Di-wifr: Set the SSID (network name) for Wireless 2.4G and Wireless 5G. Enter your desired password. (Note: The password should be the same as your router's password. The SSID can be customized as you prefer.)
8. Gorffen: Click "Finish" to apply settings. Reconnect to the new WiFi network using the password you set.

4.2. Repeater Mode Configuration Steps

1. Cysylltwch y ddyfais: Ensure correct cable connection and wait for the indicator light to turn on. Connect the device to your computer via Ethernet.
2. Connect to WONLINK WiFi: On your computer, connect to the WONLINK device's default WiFi signal (e.g., "WONLINK-XXXX-5G" or "WONLINK-XXXX-2G").
3. Mynediad Web Rhyngwyneb: Agor a web porwr a nodwch y cyfeiriad IP rhagosodedig 192.168.10.1 yn y bar cyfeiriad.
4. Mewngofnodi: Enter the default password "admin" to log in.
5. Dewiswch Modd Ailadroddydd: Navigate to "Wizard" and select "Repeater" mode.
6. Sganiwch am Rwydwaith Gwesteiwr: Select the 2.4G or 5.8G band, then click "Scan" to find your host router's WiFi signal. Select your network from the scan results.
7. Enter Host Password: Enter the WiFi password of your host router. (Note: The password must be identical to your router's password.)
8. Gorffen: Click "Finish" to apply settings. Reconnect to the extended WiFi network using the password you set.

5. Dulliau Gweithredu

The WONLINK AC1200 Outdoor WiFi Extender supports several operating modes to adapt to various networking needs:

• Modd AP (Pwynt Mynediad): Converts a wired internet connection into a wireless signal for expansion. Ideal for creating a new Wi-Fi hotspot.
• Modd y Llwybrydd: Functions as a standard wireless router, connecting to a modem and providing independent network access.
• Modd Ailadrodd: Extends the coverage of an existing Wi-Fi network by receiving and re-transmitting the signal.
• Modd y Bont: Similar to Repeater mode, but can form an independent SSID. Useful for connecting wired devices to a wireless network.

6. cynnal

To ensure the longevity and optimal performance of your WONLINK AC1200 Outdoor WiFi Extender, follow these maintenance guidelines:

• Glanhau Rheolaidd: Periodically wipe the device's exterior with a soft, dry cloth to remove dust and debris. Avoid using harsh chemicals or abrasive materials.
• Archwilio Cysylltiadau: Regularly check all cable connections (Ethernet, PoE) to ensure they are secure and free from damage.
• Diweddariadau Cadarnwedd: Gwiriwch y gwneuthurwr website for any available firmware updates. Keeping the firmware updated can improve performance, stability, and security.
• Ystyriaethau Amgylcheddol: Despite its IP66 rating, avoid placing the device in locations where it is constantly submerged in water or exposed to extreme physical impact. Ensure proper ventilation around the device.

7. Datrys Problemau

If you encounter issues with your WONLINK AC1200 Outdoor WiFi Extender, try the following troubleshooting steps:

• Dim Goleuadau Pŵer/Dangosydd i Ffwrdd:
  • Ensure the PoE adapter is properly connected to a power outlet and the device.
  • Check the Ethernet cable connecting the PoE adapter to the device.
• Methu Mynediad Web Rhyngwyneb (192.168.10.1):
  • Verify your computer is connected to the WONLINK device's default WiFi network or directly via Ethernet.
  • Gwnewch yn siŵr bod gosodiadau IP eich cyfrifiadur wedi'u gosod i gael cyfeiriad IP yn awtomatig (DHCP).
  • Rhowch gynnig ar glirio storfa eich porwr neu ddefnyddio porwr gwahanol.
• No Internet Access After Setup:
  • In Repeater mode, ensure you selected the correct host WiFi network and entered its password accurately.
  • In AP mode, verify the new IP address set in "Lan Settings" is compatible with your main router's network (same first three octets, different last octet).
  • Check the internet connection of your main router.
• Weak or Unstable Signal:
  • Adjust the position of the extender to minimize obstacles between it and your main router or client devices.
  • Gwnewch yn siŵr bod yr antenâu wedi'u cysylltu'n ddiogel ac wedi'u cyfeirio'n gywir.
  • Consider interference from other electronic devices or neighboring Wi-Fi networks.

For further assistance, please contact WONLINK customer support.

8. manylebau

9. Gwarant a Chefnogaeth

WONLINK is committed to providing high-quality products and excellent customer service.

• Cefnogaeth Cynnyrch: If you encounter any issues with your product, please contact us. We aim to respond within 24 hours and provide satisfactory solutions.
• Polisi Dychwelyd: This product is eligible for a refund or replacement within 14 days of purchase, subject to the seller's return policy.
• Diweddariadau Meddalwedd: Information regarding guaranteed software updates is currently unknown. Please check the official WONLINK websafle am y wybodaeth ddiweddaraf.

For more information or to contact support, visit the WONLINK Store on Amazon.