Geeni Smart Water Alarm Leak Detector with Siren - User Manual

Rhagymadrodd

The Geeni Smart Water Alarm Leak Detector with Siren is designed to provide early warning of water leaks in your home. This device helps prevent potential water damage by detecting leaks and alerting you through its built-in siren and mobile application. It integrates with your home Wi-Fi network for remote monitoring and smart home automation.

Nodweddion Allweddol

• Instant Leak Detection: Rapidly identifies the presence of water.
• Rhybuddion Amser Real: Sends immediate notifications to your smartphone.
• Built-in 80dB Alarm: Emits a loud siren to alert occupants.
• Monitor from Anywhere: Access device status and alerts remotely via the Geeni app.
• Integreiddio Cartref Clyfar: Compatible with other Geeni smart home products for automated responses.
• Rhybudd Batri Isel: Notifies you when batteries need replacement.
• Gosodiad Hawdd: Wedi'i gynllunio ar gyfer gosod cyflym a syml.
• 24/7 Peace of Mind: Continuous monitoring for enhanced home safety.

Figure 1: Key features of the Geeni Smart Water Alarm Leak Detector.

Cynnwys Pecyn

Gwiriwch fod yr holl eitemau yn bresennol yn y pecyn:

• 1x Geeni Smart Water Sensor
• 1x Siren Mounting Adhesive
• Llawlyfr Defnyddiwr 1x
• 2x Batris AAA

Ffigur 2: Cynnwys sydd wedi'i gynnwys ym mhecyn y cynnyrch.

Cynnyrch Drosview

Familiarize yourself with the components of your Geeni Smart Water Alarm Leak Detector:

• Golau LED: Indicates device status (e.g., pairing mode, leak detected).
• Allwedd Gosod: Wedi'i ddefnyddio ar gyfer paru ac ailosod y ddyfais.
• Siaradwr: Emits the 80dB siren alarm.
• Prob Synhwyrydd: The part that detects water. Must be placed flat on the surface where leaks may occur.
• Adran Batri: Holds 2x AAA batteries.
• Hyd cebl: The sensor probe is connected to the main unit by a 3.28 ft (1 m) cable.

Ffigur 3: Blaen a chefn view of the device with labeled components and dimensions.

Gosod

1. Gosod Batris

1. Agorwch yr adran batri ar gefn y brif uned.
2. Insert 2x AAA batteries, ensuring correct polarity.
3. Caewch yr adran batri yn ddiogel.

2. Download and Install the Geeni App

• Chwiliwch am "Geeni" yn yr Apple App Store neu'r Google Play Store.
• Dadlwythwch a gosodwch yr app.
• Cofrestrwch am gyfrif newydd neu mewngofnodwch os oes gennych chi un eisoes.

3. Pair the Device with Wi-Fi

1. Ensure your smartphone is connected to a 2.4 GHz Wi-Fi network. The device does not support 5 GHz networks.
2. Agorwch ap Geeni a thapiwch yr eicon "+" i ychwanegu dyfais newydd.
3. Follow the on-screen instructions in the app to put the water sensor into pairing mode and connect it to your Wi-Fi network. The LED light on the device will indicate its pairing status.

4. Lleoliad Dyfais

Strategically place the water sensor in areas prone to leaks:

• Under sinks (kitchen, bathroom)
• In basements
• Near water heaters
• In laundry rooms
• Behind dishwashers or refrigerators

Use the provided mounting adhesive to secure the main unit. Ensure the sensor probe lies flat on the surface where water might accumulate first.

Ffigur 4: Examples of multi-use placement for the water sensor.

Gweithrediad

Leak Detection and Alerts

Once installed and connected, the Geeni Smart Water Alarm continuously monitors for water. When the sensor probe detects water:

• The device will emit a loud 80-decibel siren.
• You will receive an immediate notification on your smartphone via the Geeni app.

Figure 5: Real-time leak detection and app notification.

Addasu Gosodiadau Larwm

You can customize the alarm settings through the Geeni app:

• Cyfrol seiren: Adjust the volume from mute (0dB) up to 80dB.
• Hyd y larwm: Set the duration of the siren from 30 seconds to 180 seconds.

Figure 6: Alarm volume and duration adjustment options.

Cynnal a chadw

Amnewid Batri

The device is powered by 2x AAA batteries with an expected lifespan of 3-4 months. The Geeni app will send a low battery alert when replacement is needed.

1. When a low battery alert is received, open the battery compartment.
2. Remove the old batteries and insert two new AAA batteries, observing correct polarity.
3. Caewch yr adran batri.

Profi'r Dyfais

It is recommended to periodically test the water sensor to ensure it is functioning correctly:

1. Place a small amount of water (e.g., a few drops) onto the sensor probe.
2. Verify that the siren sounds and you receive a notification on your smartphone.
3. Dry the sensor probe thoroughly after testing.

Datrys problemau

• Dyfais ddim yn cysylltu â Wi-Fi:
  Ensure your Wi-Fi network is 2.4 GHz. The device does not support 5 GHz. Try moving the device closer to your Wi-Fi router. If issues persist, try deleting the device from the Geeni app and re-pairing it following the setup instructions.
• Dim hysbysiadau ap:
  Check your smartphone's notification settings for the Geeni app to ensure notifications are enabled. Also, verify that the device is properly connected to Wi-Fi and has sufficient battery power.
• Siren not sounding or too quiet:
  Check the battery level. Ensure the siren volume is not set to mute in the Geeni app settings.
• Sensor not detecting water:
  Ensure the sensor probe is lying flat and making good contact with the surface where water might collect. Clean the sensor contacts if they appear dirty.
• Device appears offline in app:
  Check your Wi-Fi connection. If the Wi-Fi network is down or unstable, the device may appear offline. Replace batteries if they are low.

For further assistance, refer to the support section within the Geeni app or visit cefnogaeth.mygeeni.com.

Manylebau

Gwarant a Chefnogaeth

Gwybodaeth Gwarant

Daw'r cynnyrch Geeni hwn gyda Gwarant cyfyngedig 1 mlynedd o ddyddiad y pryniant. Cadwch eich prawf prynu ar gyfer hawliadau gwarant. Mae'r warant yn cwmpasu diffygion mewn deunyddiau a chrefftwaith o dan ddefnydd arferol.

Cefnogaeth i Gwsmeriaid

If you encounter any issues or have questions regarding your Geeni Smart Water Alarm Leak Detector, please contact Geeni customer support:

• Cymorth Ar-lein: Ymwelwch cefnogaeth.mygeeni.com
• Cymorth yn yr Ap: Access support directly through the Geeni mobile application.