Simyke BME28-RX Video Baby Monitor Add-on Display User Manual

Rhagymadrodd

Thank you for choosing the Simyke BME28-RX Video Baby Monitor Add-on Display. This unit is designed to expand your existing Simyke BME28 or BMS28 series baby monitor system, allowing you to view your baby from multiple locations or replace a lost/damaged parent unit. It features a high-quality IPS screen for clear visuals and a long-lasting battery for extended use. Please read this manual carefully before use to ensure proper operation and safety.

Gwybodaeth Diogelwch

Keep the monitor unit and power adapter out of reach of children.
Do not place the monitor unit near water or heat sources.
Use only the provided power adapter. Using unauthorized adapters may damage the unit and void the warranty.
Avoid dropping or subjecting the unit to severe impact.
Peidiwch â cheisio dadosod na thrwsio'r uned eich hun. Cysylltwch â chymorth cwsmeriaid i gael cymorth.
Sicrhewch awyru priodol o amgylch yr uned yn ystod y gweithrediad.

Beth Sydd yn y Bocs

1x Simyke BME28-RX Baby Monitor (Display Only)
Addasydd Pŵer 1x
Llawlyfr Defnyddiwr 1x

Cynnyrch Drosview

Blaen view of the Simyke BME28-RX baby monitor display unit, showing the screen and control buttons.

Ffigur 1: Blaen view of the Simyke BME28-RX display unit, featuring the IPS screen and navigation buttons.

Blaen view of the Simyke BME28-RX baby monitor display unit with the screen active, showing a baby's image and status icons.

Ffigur 2: The display unit with its screen active, showing a live feed and various status indicators like signal strength and temperature.

Yn ol view of the Simyke BME28-RX baby monitor display unit, showing the speaker grille and kickstand.

Ffigur 3: Cefn view of the display unit, highlighting the integrated speaker and the foldable kickstand for tabletop placement.

Display Unit Components

IPS Screen: High-resolution display for clear video feed.
Botymau Llywio: Up, Down, Left, Right, OK for menu navigation.
Botwm Pŵer: Pwyswch a dal i droi ymlaen / i ffwrdd.
Botwm meicroffon: Press to activate two-way audio.
Siaradwr: For two-way audio and alerts.
Porth Codi Tâl: Ar gyfer cysylltu'r addasydd pŵer.
Kickstand: Ar gyfer lleoliad pen bwrdd.

Gosod

1. Charging the Display Unit

Before first use, fully charge the display unit. Connect the provided power adapter to the charging port on the side of the display unit and plug it into a power outlet. The charging indicator light will illuminate. A full charge typically takes approximately 3-4 hours.

2. Pairing with a Camera Unit

This display unit is an add-on and must be paired with a compatible Simyke BME28 or BMS28 series camera unit. If your camera is already paired with another display, you can add this new display. Refer to your original camera unit's manual for specific pairing instructions. Generally, the steps involve:

Turn on both the display unit and the camera unit.
Access the 'Camera Pairing' or 'Add Camera' option in the display unit's menu.
Press the pairing button on the camera unit (location varies by model, usually on the back or bottom).
The display unit will search for and connect to the camera. Once connected, the camera's video feed will appear on the screen.

Cyfarwyddiadau Gweithredu

Pŵer Ymlaen / Diffodd

To turn on: Press and hold the Power button (⑂) until the screen illuminates.
To turn off: Press and hold the Power button (⑂) until the screen goes blank.

Swyddogaethau Sylfaenol

Rheoli cyfaint: Use the Up/Down navigation buttons to adjust the speaker volume.
Rheoli disgleirdeb: Navigate to the 'Settings' menu and select 'Brightness' to adjust screen illumination.
Llywio Dewislen: Use the Up/Down/Left/Right navigation buttons to move through menu options. Press the OK button to confirm a selection.

Nodweddion Allweddol

Image showing a person holding the monitor and a speech bubble indicating two-way audio with a baby.

Ffigur 4: Two-Way Audio feature, allowing communication with your baby.

Image comparing VOX mode (screen off when quiet) and temperature monitoring (screen on with crying baby).

Ffigur 5: VOX Mode and Temperature Monitoring capabilities.

Image showing the monitor's ability to display both day (color) and night (infrared black and white) views.

Ffigur 6: Day and Night monitoring, ensuring visibility in all lighting conditions.

Sain Dwyffordd: Press and hold the Microphone button (🎤) to speak through the camera unit to your baby. Release the button to hear your baby.
VOX Mode (Voice Operated Exchange): This mode conserves battery by turning off the screen when no sound is detected from the baby's room. The screen will automatically light up when sound is detected. Enable/disable VOX mode in the 'Settings' menu.
Monitro Tymheredd: The display unit shows the real-time temperature of the baby's room, as detected by the camera unit. Set temperature alerts in the 'Settings' menu.
Aml-gamera View: If you have multiple cameras paired, you can switch between camera views or enable a scan mode to cycle through them automatically. This feature supports up to 4 cameras.
Gweledigaeth Nos Isgoch: The camera unit automatically switches to infrared night vision in low-light conditions, providing a clear black-and-white image on the display unit.

Cynnal a chadw

Glanhau: Use a soft, dry cloth to clean the display unit. Do not use abrasive cleaners or solvents.
Storio: If storing the unit for an extended period, ensure it is fully charged and then store it in a cool, dry place. Recharge the battery every few months to maintain its health.
Gofal Batri: Er mwyn ymestyn oes y batri, osgoi rhyddhau'r batri'n llwyr yn aml.

Datrys problemau

Problem	Achos Posibl	Ateb
Dim pŵer/Ni fydd yr uned yn troi ymlaen	Battery is low or depleted. Power adapter not connected properly.	Connect the power adapter and charge the unit for at least 30 minutes. Ensure the adapter is securely plugged into both the unit and the outlet.
No video/audio from camera	Camera is off or out of range. Unit is not paired with the camera.	Ensure the camera unit is powered on and within range. Re-pair the display unit with the camera unit following the 'Pairing' instructions.
Poor video/audio quality	Interference from other devices. Camera too far from display.	Move the display unit closer to the camera. Avoid placing the unit near other electronic devices (e.g., Wi-Fi routers, microwaves) that may cause interference.
Screen freezes or unit is unresponsive	Gwall meddalwedd dros dro.	Perform a soft reset by pressing and holding the Power button for 10-15 seconds until the unit restarts. If the issue persists, contact customer support.
Mae'r batri yn draenio'n gyflym	High screen brightness. VOX mode disabled. Aging battery.	Reduce screen brightness. Enable VOX mode to conserve power. If the battery life has significantly degraded over time, it may be reaching the end of its lifespan.

Manylebau

Nodwedd	Manyleb
Enw Model	BME28-RX Display only
Dyfeisiau Cydnaws	Simyke BME28, BMS28 series baby camera
Math o Sgrin	Arddangosfa IPS
Datrysiad Dal Fideo	240P
Technoleg Cysylltedd	Diwifr (Wi-Fi)
Ffynhonnell Pwer	Corded Electric and Battery Powered
Gallu Batri	Polymer Lithiwm 2500mAh (wedi'i gynnwys)
Bywyd Batri	Hyd at 14 awr
Nifer y Sianeli	4 (yn cefnogi hyd at 4 camera)
Dimensiynau (L x W x H)	4.72 x 2.6 x 0.9 modfedd
Pwysau Eitem	7.8 owns
Lliw	Gwyn
Defnydd Dan Do / Awyr Agored	Dan do
Math Mowntio	Mynydd Pen bwrdd
Nodweddion Arbennig	Portable, 2-Way Audio, Cry Detection (VOX Mode)

Gwarant a Chefnogaeth

Simyke products are designed for reliability and performance. For warranty information or technical support, please refer to the warranty card included with your original baby monitor system or visit the official Simyke website. If you encounter any issues not covered in this manual, please contact Simyke customer service for assistance.

Gwneuthurwr: Guangdong Envision Technology Limited

Gwlad Tarddiad: Tsieina

Simyke BME28-RX