1. Gwybodaeth Diogelwch
Please read all safety instructions carefully before using the SYNCWIRE SW2002 Portable Tire Inflator. Failure to follow these instructions may result in product damage, property damage, or personal injury.
- Cadwch allan o gyrraedd plant.
- Do not operate the inflator continuously for more than 10 minutes. Allow a 10-minute cool-down period between uses to prevent overheating.
- Ensure the correct pressure unit (PSI, KPA, BAR, KG/CM²) is selected for your item before inflation.
- Peidiwch â gadael y chwyddwr heb oruchwyliaeth yn ystod y llawdriniaeth.
- Avoid exposing the inflator to rain or moisture.
- Do not attempt to disassemble or modify the device. Contact customer support for assistance.
- Defnyddiwch y cebl gwefru a'r ategolion a ddarperir yn unig.
- Storiwch y chwyddwr mewn lle oer, sych pan nad yw'n cael ei ddefnyddio.
2. Cynnwys Pecyn
Gwiriwch fod yr holl eitemau yn bresennol yn eich pecyn:
- 1x SYNCWIRE SW2002 Portable Tire Inflator
- 1x Air Hose
- Cebl Codi Tâl 1x USB-C
- Bag Storio 1x
- 4x Nozzle Adapters (Ball Needle, Bicycle Valve Nozzle, Air Pillow Nozzle, Swimming Ring Nozzle)
- 4x Car Tire Valve Caps
- 1x User Manual (This document)
- 1x Warranty Policy
Image: All components included in the SYNCWIRE SW2002 package, laid out neatly.
3. Cynnyrch Drosview
3.1 Nodweddion Allweddol
- High-Speed Inflation: Inflates tires up to 150 PSI, 2X faster than standard inflators.
- Arddangosfa LCD fawr: Ultra-large, clear display shows real-time and preset pressure values, visible day and night.
- Accurate Digital Gauge: High-precision sensor provides readings within ±0.5 PSI.
- Diffodd Auto: Automatically stops inflation once the preset pressure is reached.
- Dulliau Chwyddiant Lluosog: 5 preset modes for Car, Motorcycle, Bike, Ball, and a customizable mode.
- Unedau Amlbwrpas: Supports PSI, KPA, BAR, and KG/CM².
- Flashlight LED adeiledig: Provides illumination for use in low-light conditions.
- Banc Pŵer Argyfwng: USB output port allows charging of mobile devices.
- Compact a Chludadwy: Wedi'i gynllunio ar gyfer storio a chludo hawdd.
3.2 Cynllun Dyfais
Delwedd: Blaen view of the inflator showing the LCD screen, mode selection, power, and +/- buttons.
- Arddangosfa LCD: Shows current and target pressure, battery level, and selected mode.
- Botwm Modd: Cycles through inflation modes (Car, Motorcycle, Bike, Ball, Custom).
- Botwm Pŵer: Turns the device on/off and starts/stops inflation.
- +/- Botymau: Adjusts preset pressure values.
- Botwm yr Uned: Yn newid unedau pwysau (PSI, KPA, BAR, KG/CM²).
- Botwm Ysgafn LED: Activates/deactivates the built-in flashlight.
- Porthladd Pibell Aer: Connects the air hose to the inflator.
- Mewnbwn USB-C: Ar gyfer gwefru'r chwyddydd.
- Allbwn USB-A: Ar gyfer defnyddio'r chwyddydd fel banc pŵer.
4. Gosod
4.1 Gwefru'r Chwyddydd
- Connect the supplied USB-C charging cable to the USB-C input port on the inflator.
- Connect the other end of the cable to a compatible USB power adapter (not included) or a USB port.
- The battery indicator on the LCD display will flash during charging and become solid when fully charged.
- A full charge typically takes 2-3 hours from 2 bars to 3 bars. The device cannot be used while charging.
4.2 Attaching the Air Hose and Nozzle
- Screw the air hose securely into the air hose port on the top of the inflator.
- Select the appropriate nozzle adapter for the item you wish to inflate.
- Screw the chosen nozzle adapter onto the free end of the air hose.
5. Cyfarwyddiadau Gweithredu
5.1 Pweru Ymlaen/Diffodd
- Pwyswch a dal y Botwm Pŵer for 3 seconds to turn the inflator on.
- The LCD display will light up, showing the current battery level and default mode.
- I ddiffodd, pwyswch a daliwch y Botwm Pŵer for 3 seconds again, or the device will automatically shut off after a period of inactivity.
5.2 Selecting Inflation Mode and Unit
Image: The inflator's LCD screen displaying various preset inflation modes.
- Ar ôl troi’r pŵer ymlaen, pwyswch y Botwm Modd to cycle through the preset inflation modes: Car, Motorcycle, Bike, Ball, and Custom.
- Each mode has a default pressure range. For example, Car mode is typically 26-50 PSI.
- Gwasgwch y Botwm yr Uned to switch between pressure units: PSI, KPA, BAR, KG/CM².
5.3 Gosod y Pwysedd a Ddymunir
- Once a mode is selected, the preset pressure value will flash on the LCD.
- Defnyddiwch y + a - buttons to adjust the desired target pressure.
- Refer to your vehicle's or item's manufacturer recommendations for correct pressure values.
5.4 Dechrau a Stopio Chwyddiant
Image: The inflator actively inflating a car tire, demonstrating its speed.
- Connect the nozzle adapter to the valve stem of the item you are inflating. Ensure a tight seal.
- Gwasgwch y Botwm Pŵer to start inflation. The real-time pressure will be displayed.
- The inflator will automatically stop once the preset pressure is reached.
- To manually stop inflation, press the Botwm Pŵer eto.
- Carefully disconnect the nozzle from the valve stem. A small amount of air leakage is normal.
5.5 Defnyddio'r Fflacholau LED
- Gwasgwch y Botwm Golau LED i droi y flashlight ymlaen.
- Press again to cycle through different light modes (e.g., steady, SOS, flashing).
- Press a third time to turn off the flashlight.
5.6 Swyddogaeth y Banc Pŵer
Image: The inflator connected via USB to charge a smartphone, highlighting its power bank capability.
- Cysylltwch gebl gwefru eich dyfais â'r porthladd allbwn USB-A ar y chwyddydd.
- The inflator will begin charging your device. This function is useful for emergencies.
6. cynnal
6.1 Glanhau
- Ensure the inflator is turned off and disconnected from any power source before cleaning.
- Sychwch y tu allan gyda meddal, damp brethyn. Peidiwch â defnyddio cemegau llym na glanhawyr sgraffiniol.
- Keep the air intake and exhaust vents clear of dust and debris.
6.2 Storio
- Store the inflator and its accessories in the provided storage bag.
- Cadwch y ddyfais mewn lle oer, sych, i ffwrdd o olau haul uniongyrchol a thymheredd eithafol.
- For prolonged storage, charge the inflator every 3-6 months to maintain battery health.
7. Datrys Problemau
| Problem | Achos Posibl | Ateb |
|---|---|---|
| Nid yw'r chwyddydd yn troi ymlaen. | Batri isel. | Charge the inflator fully. |
| Mae'r chwyddwr yn stopio cyn pryd. | Preset pressure reached. | This is normal operation. Check the pressure reading. |
| Gorboethi. | Allow the device to cool down for 10 minutes before resuming use. | |
| Slow inflation or no air output. | Air hose or nozzle not securely connected. | Sicrhewch fod pob cysylltiad yn dynn. |
| Incorrect nozzle adapter used. | Select the correct adapter for the item. | |
| Darlleniadau pwysedd anghywir. | Incorrect pressure unit selected. | Press the Unit Button to select the desired unit (PSI, KPA, BAR, KG/CM²). |
| Rhwystr synhwyrydd. | Ensure the air hose and valve are clear of debris. |
8. manylebau
| Nodwedd | Manyleb |
|---|---|
| Enw Model | SW2002 |
| Brand | SYNCWIRE |
| Pwysedd Uchaf | 150 PSI |
| Cynhwysedd Llif Aer | 18 litr y funud |
| Ffynhonnell Pwer | Wedi'i Bweru â Batri |
| Modd Gweithredu | Awtomatig |
| Hyd Hose | 9.05 modfedd |
| Pwysau Eitem | 1.05 Bunt |
| Dimensiynau Cynnyrch (LxWxH) | 5.29" x 2.93" x 1.85" |
| Deunydd | Durable, Reliable |
| Lliw | Du |
9. Gwarant a Chefnogaeth
SYNCWIRE provides a Gwarant 36 mis for the SW2002 Portable Tire Inflator.
For any inquiries or assistance, please contact SYNCWIRE customer service. We are committed to providing fast and friendly support within 24 hours for all your questions and concerns.
Please refer to the included Warranty Policy document for detailed terms and conditions.