1. Cynnyrch Drosview
The ID-COOLING AS-120-K Trio is a set of three 120mm computer case fans designed for high-performance cooling with low noise operation. These fans feature a hydraulic bearing for durability and quiet performance, with fan speeds ranging from 300 RPM to 2,000 RPM, delivering up to 58 CFM of airflow and 1.94mm-H2O of static pressure. They are suitable for various cooling applications within a PC, including CPU air coolers, radiators, and general case ventilation.
Delwedd 1.1: Blaen view of the ID-COOLING AS-120-K Trio 120mm case fan.
2. Nodweddion Allweddol
- Llif Awyr pwerus: Fan speeds from 300 RPM to 2,000 RPM, providing up to 58 CFM airflow and 1.94mm-H2O static pressure.
- Gweithrediad Tawel: Hydraulic bearing design ensures long-lasting durability and a maximum noise level of 27.2 dBA.
- Cydnawsedd Amlbwrpas: Suitable for CPU air coolers, radiators, and PC cases as both intake and exhaust fans.
- Cysylltedd Cadwyn Daisy: Simplifies cable management by connecting multiple fans in series.
- Dyluniad Esthetig: Black finish integrates seamlessly into most computer case designs.
3. Cynnwys Pecyn
The ID-COOLING AS-120-K Trio package includes the following components:
- 3 x 120mm Case Fans (AS-120-K TRIO)
- Caledwedd Mowntio (sgriwiau)
- (Note: The 'heatsink' component listed in the product data refers to the cooling capability of the fans, not a separate heatsink unit.)
4. Canllaw Gosod
Follow these steps to properly install your ID-COOLING AS-120-K Trio case fans:
4.1 Prepare Your System
- Diffoddwch eich cyfrifiadur a'i ddatgysylltu o'r soced wal.
- Agorwch gas eich cyfrifiadur i gael mynediad at leoliadau gosod y ffan.
4.2 Mounting the Fans
- Identify the desired mounting location(s) for your fans (e.g., front, top, rear, bottom of the case, or on a CPU cooler/radiator). Ensure proper airflow direction (intake or exhaust) for optimal cooling.
- Align the fan with the screw holes on your case or radiator. Use the provided mounting screws to secure the fan in place. Do not overtighten.
Delwedd 4.1: Enghraifftample of fans installed in a PC case. The fans can be configured for intake or exhaust.
4.3 Connecting the Fans (Daisy Chain)
The AS-120-K Trio fans feature a daisy-chain design for simplified cable management. This allows you to connect multiple fans to a single fan header on your motherboard.
- Connect the 4-pin PWM cable from the first fan to an available 4-pin fan header on your motherboard (e.g., CPU_FAN, SYS_FAN).
- Connect the daisy-chain connector from the first fan to the input connector of the second fan.
- Repeat step 2 for any additional fans, connecting them in series.
- Sicrhewch fod pob cysylltiad yn ddiogel.
Image 4.2: Daisy chain connectors for simplified cable management.
Image 4.3: Visual representation of daisy-chaining multiple fans.
5. Cyfarwyddiadau Gweithredu
The ID-COOLING AS-120-K Trio fans utilize Pulse Width Modulation (PWM) control, allowing your motherboard to dynamically adjust fan speeds based on system temperature. This ensures optimal cooling performance while minimizing noise.
- After installation, power on your computer. The fans should begin spinning.
- To adjust fan speed curves, access your motherboard's BIOS/UEFI settings or use compatible fan control software provided by your motherboard manufacturer.
- Configure fan profiles to balance cooling performance and noise levels according to your preferences.
Image 5.1: The fans support Precise PWM Control for dynamic speed adjustment.
6. cynnal
Mae cynnal a chadw rheolaidd yn helpu i sicrhau hirhoedledd a pherfformiad gorau posibl eich ffannau.
- Glanhau: Periodically clean the fan blades and frame to remove dust buildup. Use compressed air or a soft brush. Ensure the computer is powered off and unplugged before cleaning.
- Arolygiad: Check fan cables for any signs of wear or damage. Ensure all connections remain secure.
- Amgylchedd: Operate your computer in a clean, well-ventilated environment to minimize dust accumulation.
7. Datrys Problemau
| Problem | Achos Posibl | Ateb |
|---|---|---|
| Ffan ddim yn nyddu | Loose cable connection, insufficient power, faulty fan header. | Check all 4-pin PWM connections. Try connecting to a different fan header. Ensure power supply is adequate. |
| Sŵn gormodol | Dust buildup, fan rubbing against cables, high RPM setting, faulty bearing. | Clean fan blades. Ensure no cables are obstructing the fan. Adjust fan speed settings in BIOS/software. If noise persists, the fan may be faulty. |
| Perfformiad oeri gwael | Incorrect airflow direction, insufficient fan speed, dust buildup. | Verify fans are oriented correctly for intake/exhaust. Increase fan speeds. Clean fans and case filters. |
8. manylebau
| Nodwedd | Manylyn |
|---|---|
| Model | AS-120-K TRIO |
| Dimensiynau Fan | 120mm x 120mm x 25mm (4.72"H x 4.72"L x 4.72"U) |
| Cyflymder Fan | 300 - 2000 RPM (PWM Controlled) |
| Max. Llif aer | 58 CFM |
| Max. Pwysedd Statig | 1.94 mmH2O |
| Lefel Sŵn | 27.2 dB(A) Max |
| Math Gan gadw | Gan Hydrolig |
| Pŵer Connector | PWM 4-Pin |
| Graddedig Voltage | 12V DC |
| Deunydd | Copper (Note: This likely refers to internal motor components, as the fan frame and blades are typically plastic.) |
| Dyfeisiau Cydnaws | Desktop PCs (for CPU air coolers, radiators, PC cases) |
9. Fideo Cynnyrch Drosoddview
Gwyliwch y fideo swyddogol hwn am drosolwg gweledolview of the ID-COOLING AS-120-K Trio fans, demonstrating their features and installation.
Fideo 9.1: Gorffen swyddogolview of the ID-COOLING AS-120-K Trio fans. This video demonstrates the physical appearance, daisy-chaining feature, and installation within a PC case.
10. Gwarant a Chefnogaeth
ID-COOLING products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please visit the official ID-COOLING websafle neu cysylltwch â'u cymorth cwsmeriaid yn uniongyrchol. Cadwch eich derbynneb prynu fel prawf o brynu ar gyfer hawliadau gwarant.
Official ID-COOLING Store: ID-COOLING Amazon Store
