Rheolydd Camera IP Lumens VS-KB21

1. Rhagymadrodd

The Lumens VS-KB21 is an advanced IP camera controller designed for professional video production environments. It provides comprehensive control over up to 255 IP-connected cameras, supporting various communication interfaces including RS-232, RS-422, and Ethernet. Key features include a 4-axis joystick for precise Pan/Tilt/Zoom control, a 3-inch LCD for RTSP preview, and user-assignable keys for quick access to functions. This manual provides detailed instructions for setting up, operating, and maintaining your VS-KB21 controller.

2. Cynnyrch Drosview

Familiarize yourself with the components and controls of the VS-KB21 controller.

2.1 Rheolaethau Panel Blaen

Ffigur 1: Blaen view of the Lumens VS-KB21 IP Camera Controller, showing the joystick, LCD screen, and various control buttons and knobs.

• ffon reoli: 4-axis control for Pan, Tilt, and Zoom.
• Sgrin LCD: 3-inch display for RTSP video preview a llywio dewislen.
• Nodiau: Dedicated controls for Iris, Shutter, Gain, White Balance, and Focus.
• Allweddell: Numeric and function keys for camera selection, preset recall, and menu input.
• User-Assignable Keys (F1, F2): Botymau swyddogaeth addasadwy.
• Zoom Seesaw Lever: For precise zoom control (Tele/Wide).

2.2 Cysylltiadau Panel Cefn

Ffigur 2: Cefn view of the Lumens VS-KB21 IP Camera Controller, highlighting the connectivity ports.

• Porthladd RS-422: For serial communication with cameras.
• Porthladd RS-232: For serial communication with cameras.
• Porthladd GWASANAETH: USB port for firmware updates and service.
• ETHERNET Port: RJ-45 connector for IP control and PoE (Power over Ethernet).
• DC YN 12V: Power input for the included DC adapter.
• Newid POWER: On/Off switch for the unit.
• LOCK Slot: For security cable.

3. Gosod

Follow these steps to set up your VS-KB21 controller.

1. Cysylltiad Pwer:
   • Connect the provided DC 12V power adapter to the 'DC IN 12V' port on the rear panel and plug it into a power outlet.
   • Alternatively, if using a PoE-enabled network switch, connect an Ethernet cable from the switch to the 'ETHERNET' port. The unit will power on via PoE.
2. Network Connection (for IP Control):
   • Connect an Ethernet cable from the 'ETHERNET' port on the controller to your network switch or router. Ensure the controller and IP cameras are on the same network segment.
3. Serial Connection (for RS-232/RS-422 Control):
   • For RS-232 control, connect a serial cable from the 'RS-232' port on the controller to the camera's RS-232 port.
   • For RS-422 control, connect a serial cable from the 'RS-422' port on the controller to the camera's RS-422 port.
4. Pŵer Cychwynnol Ar:
   • Flip the 'POWER' switch to the ON position. The LCD screen will illuminate, and the controller will initialize.
5. Ffurfwedd Camera:
   • Access the controller's settings menu via the LCD to add and configure your IP or serial cameras. Refer to the on-screen prompts for IP address, port, and protocol settings (VISCA, VISCA Over IP).

4. Cyfarwyddiadau Gweithredu

This section details the operation of the VS-KB21 controller for managing your cameras.

4.1 Dewis Camera

• Press the 'CAM LIST' button to view a list of configured cameras.
• Use the numeric keypad (CAM 1-7) or the joystick to select the desired camera.
• Pwyswch 'ENTER' i gadarnhau eich dewis.

4.2 Rheoli Panio, Gogwydd, a Chwyddo (PTZ)

• Tremio/Tilt: Move the 4-axis joystick left/right for pan and up/down for tilt.
• Chwyddo: Rotate the joystick head or use the 'TELE' (zoom in) and 'WIDE' (zoom out) buttons on the seesaw lever.
• PTZ Speed: Adjust the 'PTZ SPEED' knob to control the responsiveness of the joystick.

4.3 Rheoli Ffocws

• Press the 'AUTO FOCUS' button for automatic focus adjustment.
• For manual focus, use the 'FOCUS' knob: rotate 'NEAR' to focus on closer objects, 'FAR' for distant objects.

4.4 Exposure and White Balance

• Modd Amlygiad: Press 'EXPOSURE MODE' to cycle through auto, manual, and shutter priority modes.
• Iris/Shutter/Gain: Use the dedicated knobs to adjust these parameters in manual exposure mode.
• Balans Gwyn: Press 'WB MODE' to select white balance presets or 'ONE PUSH WB' for automatic one-push white balance.

4.5 Rhagosodiad

• Arbed Rhagosodiad: Position the camera as desired, then press 'SAVE' followed by a numeric key (0-9) to store the preset.
• Adalw Rhagosodiad: Press 'CALL' followed by the numeric key corresponding to the saved preset.

4.6 RTSP Preview

• The 3-inch LCD screen supports RTSP video preview from the selected IP camera. Ensure the camera's RTSP stream is correctly configured in the controller's settings.
• Press 'PVW' to toggle the preview ymlaen/i ffwrdd.

5. cynnal

Proper maintenance ensures the longevity and optimal performance of your VS-KB21 controller.

• Glanhau: Use a soft, dry cloth to clean the exterior of the controller. For stubborn marks, a slightly damp cloth with mild detergent can be used, ensuring no liquid enters the device.
• Storio: Storiwch y rheolydd mewn lle oer, sych i ffwrdd o olau haul uniongyrchol a thymheredd eithafol pan nad yw'n cael ei ddefnyddio.
• Diweddariadau Cadarnwedd: Periodically check the Lumens official website for firmware updates. Updates can be installed via the 'SERVICE' USB port.
• Osgoi hylifau: Do not expose the controller to water or other liquids.
• Osgoi Effaith: Protect the device from physical shocks and drops, especially the joystick.

6. Datrys Problemau

Cyfeiriwch at yr adran hon am atebion i broblemau cyffredin.

7. manylebau

Detailed technical specifications for the Lumens VS-KB21 IP Camera Controller.

8. Gwarant a Chefnogaeth

For warranty information, technical support, or service inquiries, please visit the official Lumens websafle neu cysylltwch â'ch deliwr awdurdodedig. Cadwch eich derbynneb prynu fel prawf o brynu ar gyfer hawliadau gwarant.

Lumens Websafle: www.mylumens.com