BoxWave DirectSync PD Cable

BoxWave DirectSync PD Cable (3ft) - USB-C to USB-C (100W) Instruction Manual

Model: DirectSync PD Cable

1. Rhagymadrodd

This manual provides essential instructions for the proper use and maintenance of your BoxWave DirectSync PD Cable. This USB-C to USB-C cable is designed for efficient power delivery up to 100W and high-speed data transfer, compatible with various USB-C devices, including the XTool XT90.

BoxWave DirectSync PD Cable coiled

Image 1.1: The BoxWave DirectSync PD Cable, coiled for storage.

2. Nodweddion Cynnyrch

  • Cyflenwi Pŵer 100W: Supports fast charging for a wide range of USB-C devices, including laptops, tablets, and smartphones, with power delivery up to 100 Watts.
  • Trosglwyddo Data Cyflymder Uchel: Facilitates data synchronization at speeds up to 480Mbps, allowing for quick file transfers while charging.
  • Durable Braided Design: Constructed with high-grade nylon braiding for enhanced durability, resistance to tangles, and protection against daily wear and tear.
  • Reinforced Strain Relief: Features rubberized grommet strain reliefs at both connector ends to prevent cable fraying and ensure a stable connection over time.
  • Cydnawsedd USB-C Cyffredinol: Designed for use with USB-C enabled devices, such as the XTool XT90.
Laptop charging with BoxWave DirectSync PD Cable

Image 2.1: The cable connected to a laptop, illustrating its power delivery capability.

Laptop and phone charging and syncing with BoxWave DirectSync PD Cable

Image 2.2: The cable simultaneously charging a laptop and a smartphone, demonstrating charge and sync functionality.

3. Gosod a Chysylltiad

  1. Nodi Porthladdoedd: Ensure your device and power source (e.g., wall adapter, computer) have compatible USB-C ports.
  2. Cysylltu â Power Source: Insert one end of the BoxWave DirectSync PD Cable into a USB-C power adapter or a USB-C port on a computer.
  3. Cysylltu â Dyfais: Insert the other end of the cable into the USB-C port of your device (e.g., XTool XT90, laptop, smartphone).
  4. Gwirio Cysylltiad: Confirm that both ends of the cable are securely seated in their respective ports. Your device should indicate that it is charging or connected for data transfer.
BoxWave DirectSync PD Cable connected to an XTool XT90 device

Image 3.1: The BoxWave DirectSync PD Cable connected to an XTool XT90 device.

4. Cyfarwyddiadau Gweithredu

4.1 Codi Tâl ar Eich Dyfais

To charge your device, connect the cable as described in the "Setup and Connection" section. The cable supports Power Delivery (PD) up to 100W, allowing for rapid charging when paired with a compatible power adapter and device. Charging speed may vary based on the power source and device capabilities.

4.2 Trosglwyddo Data

For data transfer, connect your device to a computer using the BoxWave DirectSync PD Cable. Once connected, your device should appear as a removable storage device or prompt you to select a connection mode (e.g., "File Transfer," "PTP"). Follow your device's instructions to initiate data transfer. The cable supports data speeds up to 480Mbps.

5. Cynnal a Chadw a Gofal

  • Storio: Store the cable in a clean, dry place away from extreme temperatures and direct sunlight. Avoid tightly coiling or bending the cable at sharp angles to prevent internal damage.
  • Glanhau: Use a soft, dry cloth to gently wipe the cable and connectors. Do not use liquid cleaners or abrasive materials.
  • Trin: Always grasp the connector head when plugging or unplugging the cable, rather than pulling on the cable itself. This helps preserve the integrity of the strain relief and internal wiring.
  • Arolygiad: Periodically inspect the cable for any signs of wear, fraying, or damage to the connectors. Discontinue use if damage is observed.
Close-up of the nylon braided exterior of the BoxWave DirectSync PD Cable

Delwedd 5.1: Llun agos view of the durable nylon braided cable design.

Close-up of the reinforced strain relief on the BoxWave DirectSync PD Cable connector

Image 5.2: Detail of the reinforced strain relief, designed to prevent cable damage at the connector.

6. Datrys Problemau

ProblemAchos PosiblAteb
Dyfais ddim yn gwefru.
  • Cysylltiad rhydd.
  • Addasydd pŵer anghydnaws.
  • Device or power source issue.
  • Ensure cable is firmly plugged into both device and power source.
  • Use a USB-C PD compatible power adapter.
  • Test with another cable or power source to isolate the issue.
Cyflymder codi tâl araf.
  • Power adapter not sufficient for 100W PD.
  • Nid yw'r ddyfais yn cefnogi gwefru cyflym.
  • Use a power adapter that supports 100W Power Delivery.
  • Verify your device's charging specifications.
Nid yw trosglwyddo data yn gweithio.
  • Incorrect device connection mode.
  • Driver issues on computer.
  • Ar eich dyfais, dewiswch "File Transfer" or "MTP" mode.
  • Ensure your computer has the necessary drivers for your device.

7. manylebau

  • Model: DirectSync PD Cable
  • Brand: Ton Bocs
  • Math o gysylltydd: USB-C i USB-C
  • Hyd cebl: 3 feet (approximately 100 cm)
  • Cyflenwi Pŵer: Hyd at 100W
  • Cyflymder Trosglwyddo Data: Hyd at 480Mbps
  • Deunydd: High-grade Nylon Braided
  • Lliw: Jet Ddu
  • Pwysau Eitem: 3 owns

8. Gwarant a Chefnogaeth

BoxWave products are designed for reliability and performance. For information regarding warranty coverage, technical support, or to contact customer service, please visit the official BoxWave website or refer to the product packaging for specific details.

Websafle: www.boxwave.com

© 2024 BoxWave Corporation. All rights reserved.