ECD Germany IP-2150

ECD Germany 2.5T Hydraulic Car Jack (Model IP-2150) Instruction Manual

Brand: ECD Germany | Model: IP-2150

Rhagymadrodd

This manual provides essential instructions for the safe and effective use, maintenance, and troubleshooting of your ECD Germany 2.5T Hydraulic Car Jack. Please read this manual thoroughly before operation to ensure proper handling and to prevent personal injury or damage to property.

Cyfarwyddiadau Diogelwch Pwysig

RHYBUDD: Failure to follow these instructions may result in serious injury or death. Always prioritize safety when operating lifting equipment.

  • Read Entire Manual: Understand all instructions and warnings before using this jack.
  • Cynhwysedd â Gradd: Do not exceed the jack's rated capacity of 2.5 tons (2500 kg).
  • Arwyneb sefydlog: Always use the jack on a hard, level, and stable surface. Avoid soft ground or inclines.
  • Sefydlogrwydd Cerbyd: Ensure the vehicle is in park (P), the ignition is off, and the parking brake is engaged. Block wheels that are not being lifted.
  • Proper Lift Points: Only lift the vehicle at manufacturer-recommended lift points. Use the provided rubber pads to protect the vehicle's chassis.
  • Stondinau Cefnogi: After lifting, immediately support the vehicle with appropriate jack stands. Never work under a vehicle supported only by a hydraulic jack.
  • Ardal glir: Keep hands, feet, and other body parts clear of moving parts and the area under the vehicle.
  • Lowering Slowly: Lower the vehicle slowly and carefully.
  • Arolygiad: Inspect the jack for damage or leaks before each use. Do not use if damaged.
  • Plant a Gwylwyr: Cadw plant a phobl anawdurdodedig i ffwrdd o'r man gwaith.

Cynnwys Pecyn

Gwiriwch fod yr holl gydrannau yn bresennol ac yn ddi-ddifrod wrth ddadbacio:

  • 1 x ECD Germany 2.5T Hydraulic Car Jack
  • 2 x Rubber Pads (for scratch and slip protection)
  • 1 x SUV Adapter (for increased lift height)
  • 1 x Pump Lever (operating handle)
ECD Germany 2.5T Hydraulic Car Jack with included accessories: two rubber pads and one SUV adapter.

Image: The hydraulic jack shown with its pump lever, two rubber pads, and an SUV adapter, as included in the package.

Manylebau

Rhif ModelIP-2150
Gallu2500 kg (2.5 Tons)
Isafswm Uchder Lifft80 mm
Uchder Lifft Uchaf360 mm
Dimensiynau Cynnyrch (L x W x H)53 x 17 x 13 cm
Pwysau Cynnyrch10.8 kg
DeunyddAlloy Steel, Cast Iron
ArddullHydrolig
Olwynion2 fixed, 2 x 360° swivel casters
Technical diagram of the hydraulic car jack showing dimensions: minimum 80mm, maximum 360mm lift height, and overall length.

Image: Detailed dimensions of the hydraulic jack, illustrating its minimum and maximum lift heights, and overall length.

Gosod a Pharatoi

  1. Dadbacio: Carefully remove the jack and all accessories from the packaging.
  2. Archwiliwch: Check the jack for any signs of damage or oil leaks that may have occurred during shipping. Do not use if damaged.
  3. Ymgynnull y Ddolen: Insert the pump lever into the handle socket. Ensure it is securely seated.
  4. Bleed Air (First Use): Before first use, it is recommended to bleed any air from the hydraulic system.
    • Turn the release valve counter-clockwise to fully open it.
    • Pump the handle several times to expel any trapped air.
    • Trowch y falf rhyddhau clocwedd i'w chau.
  5. Atodwch Ategolion: Place a rubber pad on the saddle of the jack. If lifting an SUV or a vehicle requiring extra height, attach the SUV adapter on top of the rubber pad.
Yn agos view of the jack's saddle with a rubber pad and SUV adapter being attached.

Image: Illustration of attaching the rubber pad and SUV adapter to the jack's saddle for proper vehicle contact and protection.

Cyfarwyddiadau Gweithredu

Lifting a Vehicle:

  1. Paratoi cerbyd: Park the vehicle on a firm, level surface. Engage the parking brake and place the transmission in "Park" (automatic) or a low gear (manual). Block the wheels that will remain on the ground.
  2. Position Jack: Locate the vehicle manufacturer's recommended lifting points. Position the jack directly under the designated lift point, ensuring the saddle with the rubber pad (and SUV adapter if needed) is centered and making full contact.
  3. Close Release Valve: Turn the pump lever clockwise until the release valve is fully closed. This prepares the jack for lifting.
  4. Cerbyd Codi: Pump the handle up and down to raise the vehicle to the desired height. Lift only high enough to perform the necessary work.
  5. Secure with Jack Stands: Immediately place appropriately rated jack stands under the vehicle's designated support points. Lower the vehicle slowly until it rests securely on the jack stands. Never rely solely on the hydraulic jack for support.
  6. Tynnu Jack: Once the vehicle is safely supported by jack stands, you can remove the hydraulic jack.
Hydraulic car jack positioned under a vehicle's lift point, ready to lift.

Image: The hydraulic jack correctly placed under a vehicle's designated lifting point, demonstrating proper positioning before lifting.

Lowering a Vehicle:

  1. Raise Slightly: If the vehicle is on jack stands, pump the jack handle a few times to slightly raise the vehicle off the jack stands.
  2. Remove Jack Stands: Carefully remove the jack stands from under the vehicle.
  3. Cerbyd Isaf: Slowly turn the pump lever counter-clockwise to open the release valve. The vehicle will begin to lower. Control the lowering speed by adjusting how much you open the valve.
  4. Fully Lower: Once the vehicle is fully lowered and resting on the ground, remove the jack from underneath.
Diagram illustrating the jack's simple lift system, showing the pump lever insertion and the process to open the drain valve for lowering.

Image: A visual guide to the jack's lifting and lowering mechanism, including how to insert the lever and open the drain valve for controlled descent.

Cynnal a chadw

  • Iro: Periodically lubricate all moving parts with light machine oil.
  • Olew Hydrolig: Check the hydraulic oil level regularly. If low, refill with high-quality hydraulic jack oil. Do not use brake fluid or other fluids.
  • Glanhau: Keep the jack clean and free of dirt, grease, and debris.
  • Storio: Store the jack in a dry, clean place with the ram fully retracted to prevent corrosion and seal damage.
  • Arolygiad: Regularly inspect for wear, damage, or leaks. Any damaged parts must be replaced by qualified personnel.

Datrys problemau

ProblemAchos PosiblAteb
Ni fydd Jack yn codi neu mae'n codi'n araf.
  • Falf rhyddhau heb ei gau'n llawn.
  • Lefel olew hydrolig isel.
  • Aer yn y system hydrolig.
  • Gorlwytho.
  • Turn pump lever clockwise to fully close valve.
  • Gwirio ac ail-lenwi olew hydrolig.
  • Bleed air from the system (see Setup section).
  • Ensure load does not exceed 2.5T capacity.
Mae Jac yn gostwng o dan lwyth.
  • Falf rhyddhau heb ei gau'n llawn.
  • Internal seal leakage.
  • Gorlwytho.
  • Turn pump lever clockwise to fully close valve.
  • Cysylltwch â chymorth cwsmeriaid am wasanaeth.
  • Ensure load does not exceed 2.5T capacity.
Jack does not lower.
  • Release valve stuck or obstructed.
  • Gently try to turn the pump lever counter-clockwise. Do not force. If still stuck, contact customer support.

Gwybodaeth Gwarant

The manufacturer provides a warranty for this product. Please refer to the warranty card included with your purchase or visit the official ECD Germany websafle am delerau ac amodau gwarant manwl. Cadwch eich prawf prynu ar gyfer hawliadau gwarant.

The product specifications indicate that a manufacturer's warranty is provided.

Cefnogaeth i Gwsmeriaid

For technical assistance, spare parts, or warranty inquiries, please contact ECD Germany customer service. You can find contact information on the official ECD Germany websafle neu drwy eich manwerthwr.

Adnoddau Ar-lein: Visit the ECD Germany Store on Amazon

© 2026 ECD Germany. All rights reserved.

Gall y llawlyfr hwn newid heb rybudd.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.