Phanteks XT View Llawlyfr Cyfarwyddiadau Siasi Hapchwarae Canol-Tŵr

1. Rhagymadrodd

The Phanteks XT View is a mid-tower gaming chassis designed to accommodate modern hardware with enhanced cooling capabilities and internal space. It features tempered glass on both the front and side panels, allowing for a clear view of internal components. The chassis supports the latest mainboards with hidden rear connectors for a clean build aesthetic.

Image 1.1: Phanteks XT View Chassis with internal components and D-RGB lighting.

Nodweddion Allweddol:

• Support for rear-side connector mainboards.
• Front and side tempered glass panels.
• Includes three M25-120mm D-RGB fans.
• Supports up to nine 120mm fan positions.
• Dedicated 360mm radiator support in the top panel.
• Accommodates large graphics cards.

2. Cynnwys Pecyn

Gwiriwch fod yr holl gydrannau yn bresennol yn y pecyn:

• XT View Chassis (Black)
• Storage Bracket (1x)
• M25-120_DBK Fan (3x)
• D-RGB Controller (1x)
• Triple SSD Bracket (1x)
• Side D-RGB LED strip (1x)
• Accessory Box containing:
  • Cysylltiadau zip (30x)
  • MB/SSD Screws (30x)
  • Sgriwiau Bawd (4x)
  • HDD Screws (8x)
  • Standoff Tool (1x)
  • MB Standoff (1x)
  • PSU Screws (4x)
  • 30mm Fan Screws (12x, UNC6-32)

3. Gosod a Gosod

Follow these steps for proper assembly and installation of your PC components within the Phanteks XT View siasi.

3.1. Paratoi'r Siasi

1. Dadbacio: Tynnwch y siasi o'i becynnu yn ofalus.
2. Dileu Paneli: Unscrew and remove the tempered glass side panels and any other removable panels to access the interior.

Delwedd 3.1: Tu Mewn view of the XT View chassis, ready for component installation.

3.2. Gosod Motherboard

1. Gosod Standoffs: Ensure the correct standoffs are installed for your motherboard form factor (ATX, micro-ATX, mini-ITX, E-ATX). Use the included standoff tool if necessary.
2. Place Motherboard: Carefully align your motherboard with the standoffs and I/O shield opening.
3. Mamfwrdd Diogel: Use the provided MB screws to secure the motherboard to the chassis.

3.3. Gosod yr Uned Cyflenwad Pŵer (PSU)

1. PSU Safle: Slide the PSU into its designated compartment at the bottom rear of the chassis.
2. PSU Diogel: Fasten the PSU to the chassis using the provided PSU screws.

3.4. Gosod Gyriant Storio

The chassis supports 3.5" HDDs and 2.5" SSDs.

• Gyriant caled 3.5": Install into the storage bracket. The chassis supports 2x 3.5" drives (or 1x if 2x SSDs are installed in the same bracket).
• SSD 2.5": Install into the storage bracket or the triple SSD bracket. The chassis supports 2x 2.5" drives (or 0x if 2x HDDs are installed in the same bracket).

Secure drives with the appropriate screws.

3.5. Expansion Card (GPU) Installation

1. Tynnwch Gorchuddion Slotiau: Remove the necessary expansion slot covers from the rear of the chassis.
2. Mewnosod Cerdyn: Carefully insert your graphics card or other expansion cards into the PCIe slots on the motherboard.
3. Cerdyn Diogel: Fasten the expansion card with screws. Vertical GPU support is available with an optional bracket (PH-VGPUKT4.0_03R/PH-PGPUKT_01).

Image 3.2: Rear interior view highlighting expansion slots and fan mounting points.

3.6. Gosod Ffan a Rheiddiadur

The chassis supports various fan and radiator configurations:

• 120mm Fan Locations: Right Side (2x), Top (3x), Rear (1x), Midplate (3x).
• 140mm Fan Locations: Top (2x), Rear (1x).
• Liquid Cooling Radiator Support:
  • Side: Up to 240mm (with Vertical GPU only).
  • Top: Up to 360mm.
  • Rear: Up to 120mm.

Install the included M25-120 D-RGB fans in your preferred locations. Ensure proper airflow direction for optimal cooling.

3.7. Rheoli Ceblau

Utilize the cable routing channels and tie-down points behind the motherboard tray to organize cables. This improves airflow and aesthetics.

Delwedd 3.3: Cefn view illustrating cable management space.

3.8. Cysylltiadau I/O blaen

Connect the front I/O cables from the chassis to the corresponding headers on your motherboard:

• Pennawd USB 3.0
• USB-C 3.2 Gen2 Type-E header
• HD-Audio header
• Power switch, Reset button, D-RGB color button, D-RGB mode button headers
• D-RGB expansion header (for additional D-RGB devices)

4. Cyfarwyddiadau Gweithredu

4.1. Pŵer Ymlaen / I ffwrdd

Gwasgwch y Botwm Pŵer located on the top front panel to turn the system on or off.

4.2. Cysylltedd y Panel Blaen

The front I/O panel provides convenient access to:

• Porthladd USB 1 3.0x
• 1x USB-C 3.2 Gen2 port
• Microphone/Headphone Combo jack

Image 4.1: Front I/O panel on the top of the chassis.

4.3. D-RGB Control

The integrated D-RGB controller allows for customization of the included D-RGB fans and LED strip. Use the D-RGB color button to cycle through colors and the D-RGB mode button to change lighting effects. The D-RGB system can also be synchronized with compatible motherboards via the D-RGB Motherboard connector.

5. cynnal

5.1. Cleaning Dust Filters

Regularly clean the dust filters to maintain optimal airflow and cooling performance. Dust filters are typically located at the front, top, and bottom of the chassis.

1. Dileu Hidlau: Gently slide out or unclip the dust filters.
2. Glanhau: Use compressed air or a soft brush to remove accumulated dust. For heavily soiled filters, wash with water and allow to dry completely before reinstallation.
3. Ailosod: Place the clean, dry filters back into their positions.

5.2. Glanhau Cyffredinol

For external surfaces, use a soft, damp cloth to wipe down the chassis. Avoid abrasive cleaners or solvents that may damage the finish or tempered glass.

6. Datrys Problemau

Mae'r adran hon yn mynd i'r afael â phroblemau cyffredin y gallech ddod ar eu traws.

6.1. Nid yw'r System yn Troi Ymlaen

• Cysylltiadau Pwer: Verify that the PSU is properly connected to the wall outlet and the power switch on the PSU is in the 'ON' position.
• Motherboard Connections: Ensure all power cables from the PSU are securely connected to the motherboard (24-pin ATX, 8-pin CPU).
• Front Panel Header: Check that the power button cable from the front I/O is correctly connected to the motherboard's front panel header.

6.2. D-RGB Lighting Not Functioning

• D-RGB Controller Connection: Ensure the D-RGB controller is properly connected to the PSU and the D-RGB devices (fans, LED strip).
• Cysoni mamfwrdd: If using motherboard D-RGB control, verify the D-RGB Motherboard cable is correctly connected and the motherboard's software is configured.
• Ymarferoldeb botwm: Test the D-RGB color and mode buttons on the front panel.

6.3. Fan Noise or Malfunction

• Cysylltiadau: Ensure fan cables are securely connected to the motherboard fan headers or a fan controller.
• Rhwystrau: Check for any cables or objects obstructing fan blades.
• Llwch: Clean any dust buildup on fan blades.

7. manylebau

8. Cefnogaeth a Gwarant

For additional information, technical support, or warranty inquiries, please visit the official Phanteks websafle:

www.phanteks.com

Refer to the Phanteks website for the most current warranty terms and conditions applicable to your region.