TFA Dostmann Professional Digital Thermometer LT202 30.1052.02 User Manual

1. Rhagymadrodd

This manual provides detailed instructions for the proper use and maintenance of your TFA Dostmann LT202 Professional Digital Thermometer. This device is designed for precise temperature measurement in various environments, including refrigerators, freezers, aquariums, terrariums, pharmacies, laboratories, and supermarkets, where accurate temperature monitoring is crucial.

The thermometer features a waterproof cable sensor, permanent display of maximum and minimum values, and an adjustable optical and acoustic temperature alarm. It complies with EN13485 standards, making it suitable for professional applications.

2. Nodweddion Cynnyrch

• Control Thermometer: Practical digital measuring device for temperature control in refrigerators, freezers, aquariums, terrariums, or other areas requiring precise temperature.
• Cable Probe: Features an approximately 2-meter long waterproof cable probe for fast response times (measurement interval every 10 seconds) and flexible placement options (magnet, stand, hanging eyelet).
• Arddangos Digidol: Permanent display of maximum and minimum values (manual reset) with an adjustable optical and acoustic temperature alarm, configurable to 3 volume levels (loud, normal, mute).
• Cywirdeb Uchel: Operates with high-quality sensors to display temperature with high precision and trigger the alarm within seconds. Accuracy: ±0.3 °C from -10 °C to +20 °C, ±0.5 °C from -20 °C to -10 °C and +20 °C to +40 °C, ±1 °C from -40 °C to -20 °C and +40 °C to +70 °C.
• Cydymffurfiaeth: The thermometer complies with EN13485 standards.

3. Gosod

1. Gosod Batri:

   Open the battery compartment cover on the back of the device. Insert 2 x 1.5V AAA batteries, ensuring correct polarity (+/-). Close the battery compartment cover securely.

   

   Image: Back of the thermometer with battery compartment.

2. Cysylltiad Archwilio:

   Connect the waterproof cable probe to the designated port on the thermometer. Ensure the connection is firm.

   

   Image: Thermometer with connected probe.

   

   Delwedd: Manwl view of the waterproof probe tip.

3. Lleoliad:

   The thermometer can be placed in various ways:

   • Yn sefyll: Use the integrated stand on the back of the device to place it on a flat surface.
   • Hongian: Utilize the hanging eyelet on the back for wall mounting.
   • Ymlyniad magnetig: The device has a magnet for attaching to metallic surfaces.

   Position the waterproof probe in the area where temperature measurement is required (e.g., inside a refrigerator, aquarium, or terrarium).

   

   Image: Thermometer in a professional refrigerator setting.
   

   Image: Thermometer used with an aquarium.

   

   Image: Thermometer used with a terrarium.

4. Cyfarwyddiadau Gweithredu

Delwedd: Blaen view of the thermometer display and controls.

1. Pŵer ymlaen / i ffwrdd: The device powers on automatically upon battery insertion. There is no dedicated power button.
2. Current Temperature Display: The large digits on the display show the current temperature measured by the probe.
3. Maximum and Minimum Values (MAX/MIN):

   The display permanently shows the highest (MAX) and lowest (MIN) temperatures recorded since the last reset.

   To reset the MAX/MIN values, press and hold the CLOCH button for approximately 3 seconds until the values clear and new recording begins.
4. Temperature Alarm (HI/LO):

   The device features an adjustable temperature alarm for both high (HI) and low (LO) temperature thresholds.

   • Setting Alarm Thresholds:
     1. Gwasgwch y CLOCH button once to enter alarm setting mode. The HI alarm value will flash.
     2. Defnyddiwch y UP (^) a DOWN (v) buttons to adjust the HI temperature threshold.
     3. Gwasgwch y CLOCH button again to confirm the HI setting and move to the LO alarm value, which will flash.
     4. Defnyddiwch y UP (^) a DOWN (v) buttons to adjust the LO temperature threshold.
     5. Gwasgwch y CLOCH button a third time to confirm the LO setting and exit alarm setting mode.
   • Actifadu/Dadactifadu Larwm:

     While in normal display mode, press the CLOCH button briefly to toggle the alarm function on or off. A bell icon will appear on the display when the alarm is active.
   • Cyfrol Larwm:

     The alarm has 3 volume levels: loud, normal, and mute. To adjust, press and hold the UP (^) button while the alarm is sounding or when setting the alarm thresholds. Cycle through the volume options until desired level is reached.

5. Temperature Unit Selection (°C/°F):

   On the back of the device, locate the °C/°F switch. Slide the switch to select your preferred temperature unit.

5. cynnal

• Glanhau:

  Sychwch y ddyfais gyda meddal, damp cloth. Do not use abrasive cleaners or solvents. Ensure no water enters the main unit.

  The probe is waterproof and can be cleaned with mild soap and water.
• Amnewid Batri:

  When the display becomes dim or the device stops functioning, replace the batteries. Open the battery compartment on the back and replace the 2 x 1.5V AAA batteries with new ones, observing polarity.

  Gwaredwch batris ail-law yn unol â rheoliadau lleol.

• Storio:

  If storing the device for an extended period, remove the batteries to prevent leakage.

6. Datrys Problemau

7. manylebau

8. Gwarant

This TFA Dostmann product comes with a 1-year availability of spare parts. For specific warranty terms and conditions, please refer to the documentation included with your purchase or contact TFA Dostmann customer support.

9. Cefnogaeth

For further assistance, technical support, or inquiries regarding your TFA Dostmann Professional Digital Thermometer LT202 30.1052.02, please visit the official TFA Dostmann websafle neu cysylltwch â'u hadran gwasanaethau cwsmeriaid.

Gwneuthurwr: TFA-Dostmann

Websafle: www.tfa-dostmann.de

Please have your model number (30.1052.02) ready when contacting support.