Momcozy Hands-Free Breast Pump S12 Pro

Rhagymadrodd

The Momcozy S12 Pro Hands-Free Breast Pump is designed to provide a comfortable, efficient, and convenient pumping experience for mothers. Its wearable and portable design allows for discreet milk expression, integrating seamlessly into daily routines. Featuring a unique DoubleFit flange, three distinct pumping modes, and nine adjustable suction levels, the S12 Pro aims to mimic natural breastfeeding patterns for optimal milk output.

Gwybodaeth Diogelwch

Please read all instructions carefully before using the Momcozy S12 Pro Breast Pump. Retain this manual for future reference.

• Mae'r cynnyrch hwn wedi'i fwriadu ar gyfer defnydd personol yn unig.
• Ensure all components are clean and dry before each use to prevent contamination.
• The pump is made from BPA-free, food-grade silicone, ensuring safety for both mother and baby.
• Peidiwch â throchi'r uned modur mewn dŵr neu hylifau eraill.
• Cadwch allan o gyrraedd plant.
• If you experience pain or discomfort during pumping, discontinue use and consult a healthcare professional.
• Peidiwch â defnyddio wrth gysgu neu gysglyd.

Cynnwys Pecyn

Upon opening your Momcozy S12 Pro package, please verify that all items listed below are present and in good condition:

• Momcozy S12 Pro Motor Unit (x2)
• 24mm DoubleFit Flange (x2)
• Milk Collection Cup (x2)
• Diaffram Silicon (x2)
• Valve (x2)
• Cebl gwefru USB-C (x1)
• Milk Storage Bags (Quantity may vary by package)
• Llawlyfr Defnyddiwr

This image displays the Momcozy S12 Pro breast pump units alongside their retail packaging, illustrating the compact design of the wearable pumps.

Cydrannau Cynnyrch

The Momcozy S12 Pro consists of several key components designed for easy assembly and effective milk expression:

• Uned Modur: Houses the pump mechanism, control buttons, and smart display.
• DoubleFit Flange: A soft, double-sealed silicone flange designed for comfort and a secure fit.
• Milk Collection Cup: Collects expressed milk, with a capacity of 6 oz (180ml).
• Diaffram Silicon: Creates the vacuum necessary for suction.
• Falf: Controls milk flow into the collection cup.

The image showcases two Momcozy S12 Pro breast pump units, emphasizing their sleek, hands-free design and the unique DoubleFit flange.

Gosod a Chynulliad

Follow these steps to assemble your Momcozy S12 Pro breast pump before first use and after each cleaning:

1. Sicrhewch fod pob rhan yn lân ac yn hollol sych.
2. Insert the valve firmly into the bottom of the milk collection cup. Ensure it is securely seated to prevent leaks.
3. Place the silicone diaphragm onto the top of the milk collection cup, pressing down around the edges to create a tight seal.
4. Attach the DoubleFit flange to the milk collection cup, aligning the edges and pressing firmly until it clicks into place.
5. Finally, align the assembled collection cup and flange with the motor unit and press them together until they are securely connected.

Flange Size Selection

Choosing the correct flange size is crucial for comfort and effective milk expression. The Momcozy S12 Pro comes with 24mm flanges, suitable for nipple sizes between 20-22mm. If your nipple size falls outside this range, consider purchasing alternative flange inserts for optimal fit.

This guide provides instructions on how to measure nipple size to select the appropriate flange, ensuring a correct and comfortable fit for optimal pumping. A table lists recommended flange sizes (15mm, 17mm, 19mm, 21mm, 24mm, 27mm, 30mm) corresponding to nipple sizes.

This graphic illustrates the difference between the Momcozy DoubleFit flange and a standard flange, highlighting the double-sealed design of the DoubleFit for improved fit, airtightness, dustproofing, and gentle care.

Cyfarwyddiadau Gweithredu

Codi Tâl ar y Pwmp

Before first use, fully charge the pump. Connect the USB-C charging cable to the motor unit and a compatible power source. The smart display will indicate charging status. A full charge provides approximately 130 minutes of usage, supporting 7-8 pumping sessions.

The image shows the Momcozy S12 Pro breast pump connected to a charging cable, indicating a full charge and highlighting its long battery life for multiple pumping sessions.

Gwisgo'r Pwmp

Once assembled, place the pump unit inside your nursing bra, ensuring your nipple is centered within the flange tunnel. The hands-free design allows for mobility during pumping.

Pŵer Ymlaen / Diffodd

Press and hold the power button on the motor unit to turn the pump on or off. The smart display will illuminate upon activation.

Selecting Modes and Levels

The S12 Pro offers three distinct pumping modes and nine adjustable suction levels:

• Modd Ysgogi: Short and quick suction to initiate milk let-down.
• Modd Mynegiant: Slower and deeper suction to efficiently express milk.
• Modd Cymysg: Combines stimulation and expression patterns for comprehensive milk removal.

Use the mode button to cycle through the modes. Use the '+' and '-' buttons to adjust the suction intensity (levels 1-9) within each mode. Start with a lower level and gradually increase to a comfortable and effective setting.

The image details the smart display of the S12 Pro pump, showing the three distinct pumping modes: Stimulation (short and quick), Expression (slow and deep), and Mixed (fast and deep), each with 9 adjustable levels for customized efficiency.

Monitoring and Pausing

The smart display shows the pumping time and battery level. You can pause the pumping session at any time by pressing the pause button, and resume by pressing it again.

Ending a Session and Pouring Milk

When you have finished pumping, turn off the pump. Carefully remove the pump unit from your bra. Detach the milk collection cup from the motor unit and pour the expressed milk into a storage bag or bottle. The large 6 oz capacity allows for ample milk collection.

Glanhau a Chynnal a Chadw

Proper cleaning and maintenance are essential for hygiene and the longevity of your breast pump.

Dadosod ar gyfer Glanhau

After each use, disassemble all parts that come into contact with breast milk: the flange, milk collection cup, silicone diaphragm, and valve. The motor unit should not be washed.

Golchi

Wash all disassembled parts in warm, soapy water. Use a dedicated brush for breast pump parts. Rinse thoroughly with clean water.

Yn sterileiddio

Sterilize parts regularly, especially before first use. You can sterilize by boiling in water for 5 minutes, using a steam sterilizer, or a dishwasher with a sanitizing cycle (if parts are dishwasher safe, refer to product packaging for confirmation).

Sychu a Storio

Allow all parts to air dry completely on a clean drying rack. Avoid using cloth towels, as they can transfer lint or germs. Store dry parts in a clean, covered container until next use.

Datrys problemau

If you encounter issues with your Momcozy S12 Pro, refer to the following common problems and solutions:

Manylebau

Gwarant a Chefnogaeth

Momcozy products are designed with quality and customer satisfaction in mind. For any questions, concerns, or warranty inquiries regarding your Momcozy S12 Pro breast pump, please contact Momcozy customer support directly. Refer to the product packaging or the official Momcozy websafle ar gyfer gwybodaeth cyswllt.

Nodyn Pwysig ar Fideos

Due to the absence of specific video URLs and metadata (such as 'creator_type' or 'filename') in the provided product data, no instructional videos could be embedded in this manual. Please refer to the manufacturer's official channels for video demonstrations if available.