1. Rhagymadrodd
This manual provides detailed instructions for the installation, operation, and maintenance of your ELUTENG M.2 NVMe/SATA SSD Enclosure. This device is designed to convert M.2 NVMe or SATA SSDs into a portable external storage solution, offering high-speed data transfer and broad compatibility.
2. Cynnwys Pecyn
Gwiriwch fod yr holl eitemau yn bresennol yn eich pecyn:
- ELUTENG M.2 NVMe/SATA SSD Enclosure
- 2-in-1 USB Type-C Cable (USB-C to USB-A and USB-C to USB-C)
- Pad Thermol
- Llawlyfr Defnyddiwr (y ddogfen hon)
3. manylebau
| Nodwedd | Disgrifiad |
|---|---|
| Model | M.2 SATA/NVME Enclosure |
| Rhyngwyneb | USB 3.2 Gen 2 Math-C |
| Cyfradd Trosglwyddo Data | Up to 10Gbps (NVMe SSD), Up to 5Gbps (SATA SSD) |
| Mathau o SSD a Gefnogir | M.2 NVMe M Key / B+M Key, M.2 NGFF SATA B+M Key |
| Meintiau SSD â Chymorth | 2230, 2242, 2260, 2280 |
| Cynhwysedd Uchaf | 4TB |
| Chipset | RTL9210B (Supports UASP, Trim) |
| Deunydd | Aloi Alwminiwm |
| Dimensiynau | Tua 4.92 x 2.83 x 0.67 modfedd |
| Pwysau | Tua 60 gram (2.12 owns) |
| Cydweddoldeb OS | Windows 7/8/10/11, Mac OS, Linux, iOS, Android |
| Cydnawsedd Dyfais | PC, Smartphone, Tablet, Smart TV, Smart Router, PS4 |
4. Canllaw Gosod
4.1 Gosod SSD
Dilynwch y camau hyn i osod eich SSD M.2 yn y lloc:
- Agorwch y Lloc: Push the switch on the side of the enclosure and slide out the inner frame.
- Mewnosodwch SSD: Carefully insert your M.2 NVMe or SATA SSD into the slot on the inner frame, aligning it with the card position. Ensure the SSD is fully seated.
- SSD Diogel: Install the provided fixing buckle (plastic push-pin) to secure the SSD in place. Rotate it 90 degrees counter-clockwise to lock.
- Defnyddiwch Pad Thermol: Place the thermal pad onto the SSD chips to aid in heat dissipation.
- Close Enclosure: Slide the inner frame back into the aluminum alloy shell until it clicks securely into place.
4.2 Cysylltu â Dyfais
Use the included 2-in-1 USB Type-C cable to connect the enclosure to your computer or other compatible device. The cable supports both USB-C to USB-A and USB-C to USB-C connections.
Nodyn: For optimal performance, ensure your device has USB 3.0 or higher USB ports.
5. Cyfarwyddiadau Gweithredu
5.1 Trosglwyddo Data
Once connected, your operating system should automatically detect the ELUTENG M.2 SSD Enclosure as an external storage device. You can then drag and drop files, neu defnyddiwch eich system file offer rheoli i drosglwyddo data.
- NVMe SSD: Supports transfer rates up to 10Gbps.
- SSD SATA: Supports transfer rates up to 5Gbps.
The enclosure utilizes the RTL9210B main control chip, supporting UASP (USB Attached SCSI Protocol) and Trim commands to enhance read/write efficiency and reduce CPU load.
5.2 SSD Compatibility
The enclosure supports a wide range of M.2 SSDs:
- NVMe SSDs: M Key and B+M Key.
- SATA SSDs: B+M Key (NGFF).
- Meintiau: 2230, 2242, 2260, and 2280 form factors.
6. cynnal
6.1 Afradu Gwres
The ELUTENG M.2 SSD Enclosure features an aluminum alloy shell and a bottom heat sink hole design. This construction facilitates efficient heat transfer away from the SSD, preventing overheating and maintaining optimal performance during extended use.
6.2 Glanhau
To clean the enclosure, use a soft, dry cloth. Avoid using liquid cleaners or solvents, as these may damage the finish or internal components.
7. Datrys Problemau
- Enclosure not detected:
- Sicrhewch fod yr SSD wedi'i osod a'i ddiogelu'n gywir o fewn y lloc.
- Try connecting the enclosure to a different USB port on your device.
- Profwch gyda chebl USB gwahanol os yw ar gael.
- Gwiriwch fod yr SSD ei hun yn swyddogaethol trwy ei brofi mewn dyfais gydnaws arall os yn bosibl.
- For new SSDs, ensure they are initialized and formatted in your operating system's Disk Management (Windows) or Disk Utility (Mac OS).
- Cyflymderau trosglwyddo araf:
- Ensure you are connected to a USB 3.0 (or higher) port on your device. Older USB 2.0 ports will significantly limit speeds.
- Confirm that your SSD is an NVMe drive for 10Gbps speeds; SATA drives will operate at up to 5Gbps.
- Close other applications that might be consuming system resources or disk I/O.
- Check the health of your SSD.
- Mae'r amgaead yn mynd yn boeth:
- It is normal for the aluminum alloy shell to become warm during operation, especially during heavy data transfers, as it is designed to dissipate heat from the SSD.
- Ensure the thermal pad is correctly placed on the SSD chips.
8. Fideos Cynnyrch Swyddogol
Video: M.2 NVME SSD USB Adapter SSD Enclosure. This video provides a visual overview of the ELUTENG M.2 NVME SSD USB Adapter Enclosure, demonstrating its features and design.
Video: ELUTENG M.2 NVME SATA SSD Enclosure Aluminum. This video showcases the aluminum design and dual NVME/SATA compatibility of the ELUTENG M.2 SSD Enclosure.
9. Gwybodaeth Gwarant
ELUTENG products are designed for reliability and performance. This product comes with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or contact ELUTENG customer support.
10. Cefnogaeth
If you encounter any issues or have questions regarding your ELUTENG M.2 NVMe/SATA SSD Enclosure, please contact our customer support team. Contact information can typically be found on our official websafle neu ar becynnu'r cynnyrch.