Merax MX02147
Merax Heated Seat Smart Toilet, Model A Instruction Manual
Model: MX02147
Rhagymadrodd
This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your Merax Heated Seat Smart Toilet, Model A. Please read this manual thoroughly before installation and use to ensure proper function and safety.

Delwedd: Blaen view of the Merax Heated Seat Smart Toilet, Model A, in a bathroom setting.
Gosod a Gosod
The Merax Smart Toilet Model A is designed for floor-mounted installation. Professional installation is recommended. Ensure all local plumbing and electrical codes are met.
Dimensions and Rough-in
Before installation, verify that the rough-in measurement for your sewage outlet is compatible with the toilet's requirements. The recommended rough-in distance from the wall to the center of the sewage outlet is 300mm.

Image: Diagram illustrating the rough-in measurement of 300mm from the wall to the sewage outlet.

Image: Detailed dimensional drawing of the Merax Smart Toilet, showing height, width, and depth measurements.
Camau Gosod (Crynodeb)
- Paratoi'r Ardal: Ensure the water supply is shut off and the old toilet is removed. Clean the flange area.
- Lleoli'r Toiled: Carefully place the toilet over the flange, aligning the outlet with the drain.
- Diogelu'r Toiled: Fasten the toilet to the floor using the provided hardware. Do not overtighten.
- Cysylltu cyflenwad dŵr: Connect the water supply line to the toilet's inlet valve. Ensure a watertight seal.
- Pwer Cysylltu: Plygiwch y toiled i mewn i soced drydanol wedi'i seilio.
- Ymarferoldeb Prawf: Turn on the water supply and check for leaks. Test all features as described in the Operating section.
Cyfarwyddiadau Gweithredu
Your Merax Smart Toilet is equipped with several advanced features for comfort and convenience.

Delwedd: Drosoddview of the smart toilet's features, including Nightlight, Heated Seat, Foot Sensing Sensor, Strong Flush, and Thermostat Knob.
Sedd wedi'i Gwresogi
The toilet seat features adjustable heating. Use the side knob control to select one of four temperature settings, ranging from normal ambient temperature up to 102 degrees Fahrenheit (approximately 39 degrees Celsius).

Image: Visual representation of the four adjustable heated seat temperature levels: Normal, 91.4°F, 96.8°F, and 102.2°F.
System Fflysio Deuol
This toilet incorporates a water-conserving dual flush system.
- Small Flush (1 GPF): Activated by foot induction. Simply wave your foot near the sensor located at the base of the toilet.
- Fflysio Llawn (1.28 GPF): Activated by pressing the knob control on the side of the toilet.

Image: Illustration of a foot activating the sensor at the base of the toilet for a small flush.

Image: Close-up of the knob control, showing icons for flush, heated seat, and nightlight functions.
The toilet also features a built-in powerful battery that provides approximately 2500 flushes in case of a power outage.
Golau Nos
An integrated night light and knob ambient light provide soft illumination, enhancing visibility during nighttime use and preventing accidents.

Image: The Merax Smart Toilet with its internal night light gently illuminating the bowl.
Cynnal a Chadw a Glanhau
Regular cleaning and maintenance will ensure the longevity and optimal performance of your Merax Smart Toilet.
Cleaning the Ceramic Bowl
The toilet bowl is made of high-quality ceramic with a smooth, micro-crystal glazed surface. This design, combined with pre-wet toilet wall technology and powerful flushing, helps prevent dirt adhesion and makes cleaning easier.
- Use a soft cloth or sponge with a mild, non-abrasive cleaner.
- Avoid harsh chemicals, abrasive pads, or strong acids, as these can damage the glaze.
- Wipe down the exterior surfaces regularly.

Image: Diagram showing the internal flushing mechanism and water flow within the toilet bowl, highlighting the powerful flush design.
Glanhau'r Sedd a'r Caead
Clean the heated seat and lid with a damp cloth and mild soap. Do not immerse any electrical components in water.
Gofal Cyffredinol
- Gwiriwch bob cysylltiad o bryd i'w gilydd am ollyngiadau.
- Ensure the power cord is not damaged and is securely plugged into a grounded outlet.
Datrys problemau
If you encounter any issues with your Merax Smart Toilet, refer to the following common troubleshooting steps. For problems not listed here or if issues persist, please contact customer support.
| Problem | Achos Posibl | Ateb |
|---|---|---|
| Nid yw'r toiled yn fflysio. | No power, foot sensor obstructed, knob not pressed correctly, battery depleted. | Check power connection. Ensure foot sensor is clear. Press knob firmly. If power is out, ensure internal battery is charged. |
| Heated seat not working. | Swyddogaeth sedd wedi'i gwresogi i ffwrdd, problem pŵer. | Adjust temperature setting using the knob. Verify power connection. |
| Night light not illuminating. | Night light function off, power issue. | Check knob settings for night light activation. Verify power connection. |
| Continuous flushing or leaking. | Internal valve malfunction, water level issue. | Shut off water supply to the toilet. Contact customer support for assistance. |
Manylebau
| Nodwedd | Manylyn |
|---|---|
| Brand | Merax |
| Rhif Model | MX02147 |
| Lliw | Gwyn |
| Deunydd | Ceramic (Bowl), Plastic (Seat) |
| Dimensiynau Cynnyrch | 16.18"D x 37.01"L x 19.37"U (41.1cm D x 94cm L x 49.2cm U) |
| Pwysau Eitem | 83.8 pwys (tua 38 kg) |
| Math Gosod | Llawr wedi'i Fowntio |
| Siâp | hirgul |
| Math Fflys | Dual Flush (1 GPF / 1.28 GPF) |
| Tymheredd Sedd Wedi'i Gynhesu | 4 adjustable levels, up to 102.2°F (39°C) |
| Pwer Outage Backup | Built-in battery for approximately 2500 flushes |
| UPC | 197793039994 |
Gwarant a Chefnogaeth
For any product issues, warranty claims, or technical support, please contact Merax customer service.
- Websafle: Merax.com
- E-bost: csr@merax.com
Please have your model number (MX02147) and purchase information ready when contacting support.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.