DJI FPV Remote Controller 3 User Manual

1. Rhagymadrodd

The DJI FPV Remote Controller 3 is designed to provide precise and intuitive control for compatible DJI FPV drones and air units. Featuring an integrated antenna design, it offers enhanced video transmission capabilities with DJI O4, while being lighter and providing a longer operating time compared to previous models.

The control sticks are extended by 2 mm, allowing for comfortable single and dual-finger control. This remote controller supports Normal, Sport, and Manual flight modes, catering to pilots of all skill levels, from beginners to advanced users seeking to develop sophisticated flight techniques.

Cydnawsedd: This remote controller is compatible with DJI Avata 2, DJI Neo, and DJI O3 Air Unit.

2. Cynnyrch Drosview

Familiarize yourself with the components of your DJI FPV Remote Controller 3.

Ffigur 2.1: Ongl view of the DJI FPV Remote Controller 3, showing the joysticks and main buttons.

Ffigur 2.2: Blaen view of the remote controller, highlighting the control sticks, power button, and C1 button.

Ffigur 2.3: Uchaf view of the remote controller, showing the various control buttons and indicators, including the record and mode switch.

Ffigur 2.4: Gwaelod view of the remote controller, revealing the USB-C charging port and ergonomic grips.

Figure 2.5: A user holding the DJI FPV Remote Controller 3, demonstrating its comfortable grip and the illuminated status indicators.

2.1. Cydrannau

• Ffyn Rheoli: Used for controlling the drone's movement. The sticks are 2mm extended for improved ergonomics.
• Botwm Pŵer: Used to turn the remote controller on/off.
• C1 Button: Botwm swyddogaeth addasadwy.
• Mode Switch (N/S/M): Toggles between Normal, Sport, and Manual flight modes.
• Botwm Cofnodi: Initiates/stops video recording.
• Porthladd USB-C: Ar gyfer gwefru a chysylltu â chyfrifiadur.
• Dangosyddion Statws: LEDs indicating battery level and connection status.

Yn y Bocs: DJI FPV Remote Controller 3 × 1, DJI FPV Remote Controller 3 Control Stick (Pair) × 1, L-shaped Screwdriver × 1.

3. Gosod

3.1. Charging the Remote Controller

Before first use, fully charge the remote controller. Connect the remote controller to a USB power adapter using the provided USB-C cable. The status indicators will show the charging progress.

• Amser Codi Tâl: Tua 2 awr am dâl llawn.
• Arwydd Lefel Batri: The LEDs on the front of the controller indicate the current battery level.

3.2. Installing Control Sticks

The control sticks are detachable. Screw them clockwise into the threaded holes on the gimbals until secure. Use the provided L-shaped screwdriver to adjust the tension of the control sticks if necessary, according to your preference.

3.3. Pairing with Aircraft

To operate your drone, the remote controller must be paired with the aircraft (DJI Avata 2, DJI Neo, or DJI O3 Air Unit). Refer to your aircraft's user manual for specific pairing instructions. Generally, the process involves:

1. Power on both the remote controller and the aircraft.
2. Enter pairing mode on both devices (usually by pressing and holding a specific button).
3. Wait for the devices to connect. A successful connection is typically indicated by solid status lights on both devices.

4. Dulliau Gweithredu

The DJI FPV Remote Controller 3 offers three distinct flight modes to suit different piloting experiences and scenarios:

• Modd Arferol (N): Designed for beginners and stable flight. The drone's speed and responsiveness are limited, and GPS stabilization is active, making it easier to control and hover.
• Modd Chwaraeon (S): Offers increased speed and agility compared to Normal Mode. GPS stabilization is still active, but the drone responds more dynamically to control inputs, suitable for more experienced pilots.
• Modd Llaw (M): Provides full manual control over the drone, disabling most flight assistance features. This mode is intended for advanced pilots to perform complex maneuvers and requires significant skill and practice. It is ideal for developing sophisticated FPV flying techniques.

Switch between modes using the dedicated Mode Switch on the remote controller.

5. Gweithrediad

5.1. Rheolyddion Sylfaenol

The primary controls are managed via the two control sticks:

• Ffon Chwith (Modd 2): Controls throttle (up/down) and yaw (left/right rotation).
• Ffon Dde (Modd 2): Controls pitch (forward/backward) and roll (left/right translation).

Other buttons provide quick access to functions:

• Botwm Cofnodi: Press once to start/stop video recording.
• C1 Button: Default function may vary by aircraft, often customizable in the drone's settings.
• Botwm Pŵer: Press once to check battery level, press and hold to power on/off.

5.2. Flight Principles

Always ensure you are in an open area free from obstacles and interference. Before each flight, perform a pre-flight check of the remote controller's battery level and connection status. Practice in a simulator or in Normal Mode before attempting more advanced maneuvers.

6. cynnal

6.1. Glanhau a Storio

• Wipe the remote controller with a clean, soft cloth. Do not use alcohol or other organic solvents.
• Store the remote controller in a cool, dry place, away from direct sunlight and extreme temperatures.
• Remove the control sticks during storage or transport to prevent damage.

6.2. Gofal Batri

• Recharge the battery at least once every three months to maintain battery health, even if not in use.
• Osgowch ollwng y batri'n llwyr yn aml.
• If the remote controller will not be used for an extended period, discharge the battery to approximately 50% before storage.

7. Datrys Problemau

• Remote Controller Not Powering On:

  Ensure the battery is charged. Connect to a power source and check if the charging indicators light up. If not, try a different charging cable or adapter.
• Unable to Pair with Aircraft:

  Verify that both the remote controller and aircraft are in pairing mode. Ensure they are within range and there is no significant interference. Restart both devices and try pairing again. Consult the aircraft's manual for specific pairing steps.

• Control Sticks Not Responding:

  Check if the remote controller is successfully paired with the aircraft. Ensure the sticks are properly installed. If the issue persists, calibrate the remote controller through the DJI Fly app or equivalent software.

• Short Operating Time:

  The battery may be degraded. Ensure you are fully charging the device. Follow battery care guidelines to maximize battery life.

8. manylebau

9. Gwarant a Chefnogaeth

Am wybodaeth am warant a chymorth technegol, cyfeiriwch at y DJI swyddogol websafle neu cysylltwch â gwasanaeth cwsmeriaid DJI. Cadwch eich prawf prynu ar gyfer hawliadau gwarant.

Adnoddau Ar-lein: For the latest firmware updates, detailed tutorials, and FAQs, visit the official DJI support page.