LEVN LM101

LEVN Wireless Lavalier Microphone System User Manual

Model: LM101 | Brand: LEVN

1. Rhagymadrodd

Thank you for choosing the LEVN Wireless Lavalier Microphone System. This system is designed to provide high-quality audio recording for various applications, including video recording, streaming, voice recording, speech, and video conferencing. It features advanced noise cancellation, extended battery life, and broad compatibility with multiple devices.

This manual provides detailed instructions for setting up, operating, and maintaining your microphone system. Please read it thoroughly before use to ensure optimal performance and longevity of the product.

2. Beth sydd yn y Bocs

Upon unpacking your LEVN Wireless Lavalier Microphone System, please verify that all the following components are present:

  • Two (2) Transmitters (TX): These are the microphones that capture audio.
  • Two (2) Receivers (RX): These units connect to your recording device.
  • Un (1) Cas Gwefru: Used for charging and storing the transmitters and receivers.
LEVN Wireless Lavalier Microphone System components
Image: The LEVN Wireless Lavalier Microphone System, showing the charging case with two transmitters and two receivers.

3. Cynnyrch Drosview

The LEVN Wireless Lavalier Microphone System consists of compact and portable units designed for ease of use and high-fidelity audio capture.

Trosglwyddydd (TX)

  • Meicroffon integredig
  • Botwm Pwer / Pâr
  • Noise Cancellation button
  • Statws dangosydd golau
  • Built-in clip for attachment

Derbynnydd (RX)

  • USB Type-C or Lightning connector (depending on model)
  • Statws dangosydd golau
  • Charging port (for pass-through charging of host device)

Achos Codi Tâl

  • Charging slots for TX and RX units
  • Arddangosfa ddigidol ar gyfer lefel batri
  • Porthladd codi tâl USB-C ar gyfer yr achos
LEVN Wireless Lavalier Microphone System components in detail
Delwedd: Manwl view of the LEVN Wireless Lavalier Microphone system, highlighting the individual transmitter, receiver, and charging case.

4. Gosod

Follow these steps to set up your LEVN Wireless Lavalier Microphone System for first use.

4.1 Codi Tâl Cychwynnol

  1. Place both transmitters (TX) and receivers (RX) into the charging case.
  2. Connect the charging case to a power source using a USB-C cable (not included).
  3. The digital display on the charging case will show the battery level. Ensure all units are fully charged before first use. A full charge takes approximately 1.5 hours.

4.2 Pairing the Devices

The transmitters and receivers are typically pre-paired at the factory. If pairing is lost or if you are pairing for the first time:

  1. Remove the TX and RX units from the charging case. They will automatically power on.
  2. The indicator lights on both TX and RX will flash, indicating they are searching for a connection.
  3. Once successfully paired, the indicator lights on both units will turn solid.

4.3 Cysylltu â'ch Dyfais

  1. Plug the receiver (RX) directly into the USB Type-C or Lightning port of your smartphone, tablet, or PC.
  2. Ensure the receiver is securely connected. Your device should recognize the external microphone automatically.
LEVN Wireless Lavalier Microphone connected to various devices
Image: The LEVN Wireless Lavalier Microphone receiver connected to a smartphone, tablet, and laptop, demonstrating extensive device compatibility.

5. Cyfarwyddiadau Gweithredu

5.1 Pŵer Ymlaen/Diffodd

  • Pŵer Ymlaen: Remove the TX and RX units from the charging case. They will power on automatically. Alternatively, press and hold the Power button on the TX unit for 3 seconds.
  • Pŵer i ffwrdd: Place the TX and RX units back into the charging case. They will power off automatically. Alternatively, press and hold the Power button on the TX unit for 3 seconds.

5.2 Recordio Sain

  1. Ensure the receiver is connected to your recording device and the transmitters are powered on and paired.
  2. Clip the transmitter(s) to your clothing, ideally within 6-8 inches of your mouth, for optimal sound capture.
  3. Open your preferred audio or video recording application on your device.
  4. Start recording. The system will capture audio wirelessly through the transmitters.

5.3 Canslo Sŵn

The LEVN system features AI Noise Cancelling Technology to reduce ambient background noise.

  • To activate Noise Cancellation: Press the dedicated Noise Cancellation button on the transmitter (TX) unit. The indicator light may change color or pattern to confirm activation.
  • To deactivate Noise Cancellation: Press the Noise Cancellation button again.
AI Noise Cancelling Technology graphic
Image: A graphic representation of AI Noise Cancelling Technology, showing sound waves being filtered around the microphone units.

5.4 Monitro Sain

Some receivers may offer a pass-through charging port which can also be used for real-time audio monitoring with headphones, depending on your device's capabilities and the receiver's design. Consult your device's manual for external audio monitoring options.

6. Nodweddion a Galluoedd

6.1 Cysylltiad Dyfais Ddeuol

The system supports independent dual device connection, allowing two transmitters to record simultaneously to a single receiver, capturing audio from multiple sources.

Independent Dual Device Connection in use
Image: Two individuals using the LEVN wireless lavalier microphones, each connected to a separate smartphone, demonstrating independent dual device connection.

6.2 Bywyd Batri Estynedig

The transmitters offer up to 20 hours of continuous recording on a single charge. The charging case provides additional charges, extending the total operational time.

Powerful Battery Life graphic
Image: A visual representation of the microphone system's powerful battery life, indicating 20 hours of recording and less than 1.5 hours charging time.

6.3 Ystod Di-wifr

The system provides a stable 2.4G wireless connection with an operational range of up to 60 meters (approximately 200 feet) in open, unobstructed environments.

Wireless range demonstration
Image: A person skiing in a snowy landscape, with a smartphone in the foreground, illustrating the wireless range of up to 60 meters (196.8 inches).

6.4 Cydnawsedd Eang

The receiver is compatible with a wide range of devices, including iPhones (15/14/13/12 series), Android smartphones, and personal computers, via USB Type-C or Lightning connectors.

iOS and Android Compatibility
Image: The LEVN wireless microphone system connected to a laptop and a smartphone, demonstrating compatibility with both iOS and Android devices.

7. cynnal

Proper maintenance ensures the longevity and optimal performance of your LEVN Wireless Lavalier Microphone System.

  • Glanhau: Use a soft, dry cloth to clean the exterior of the transmitters, receivers, and charging case. Avoid using harsh chemicals or abrasive materials.
  • Storio: When not in use, store all components in the charging case to protect them from dust, moisture, and physical damage. Store in a cool, dry place.
  • Gofal Batri: For optimal battery health, avoid fully discharging the units frequently. If storing for an extended period, charge the units to approximately 50% capacity.
  • Osgoi Amodau Eithafol: Do not expose the devices to extreme temperatures, direct sunlight, or high humidity.

8. Datrys Problemau

If you encounter issues with your LEVN Wireless Lavalier Microphone System, refer to the following troubleshooting guide:

ProblemAchos PosiblAteb
No audio recordingReceiver not connected properly; TX/RX not paired; TX unit powered off or low battery; Device not recognizing external mic.Ensure RX is fully inserted into device. Check TX/RX indicator lights for pairing status. Charge TX units. Restart recording device and application.
Ansawdd sain gwael / StatigInterference; TX too far from RX; Obstructions; Low battery.Move closer to the receiver. Ensure no major obstructions. Avoid areas with strong wireless interference. Charge units.
Noise Cancellation not workingNodwedd heb ei actifadu.Press the Noise Cancellation button on the TX unit to activate.
Units not chargingCharging case low battery; Poor connection in charging slot; Faulty cable/adapter.Charge the charging case. Ensure TX/RX units are correctly seated in their slots. Try a different USB-C cable and power adapter.
Amrediad diwifr byrObstructions; Environmental interference.Operate in open environments. Minimize physical obstructions between TX and RX.

If the problem persists after attempting these solutions, please contact LEVN customer support for further assistance.

9. manylebau

Detailed technical specifications for the LEVN Wireless Lavalier Microphone System (Model LM101).

  • Rhif Model: LM101
  • Ffactor Ffurflen Meicroffon: Lavalier
  • Patrwm Pegynol: hollgyfeiriad
  • Nifer y Sianeli: 2
  • Cymhareb Arwydd-i-Sŵn: 78 dB
  • Technoleg Di-wifr:2.4G
  • Ystod Gweithredu: Up to 60 meters (200 feet) in open areas
  • Ffynhonnell Pwer: Batri Powered
  • Math Batri: Polymer Lithiwm
  • Nifer y Batris: 2 (wedi'i gynnwys)
  • Bywyd batri (TX): Up to 20 hours of recording
  • Amser Codi Tâl (Achos): Approximately <1.5 hours
  • Connector Type (RX): USB Type-C (compatible with iPhone 15/Android/PC) or Lightning (compatible with iPhone 12/13/14)
  • Dyfeisiau Cydnaws: Personal Computer, Smartphone (iOS and Android)
  • Lliw: du
  • Pwysau Eitem: 3.84 ounces (0.11 Kilograms)
  • Dimensiynau Pecyn: 4.45 x 3.23 x 1.34 modfedd
  • Defnyddiau a Argymhellir: Video Recording, Streaming, Voice Recording, Speech, Video Conference

10. Gwarant a Chefnogaeth

LEVN products are designed for reliability and performance. For information regarding warranty coverage, product registration, or technical support, please refer to the warranty card included with your product or visit the official LEVN websafle.

For direct support, you may contact LEVN customer service through the contact information provided on the official websafle neu'ch platfform prynu.

© 2024 LEVN. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.