deallusamp Solar Flood Lights Outdoor Motion Sensor User Manual

1. Cynnyrch Drosview

The intelamp Solar Flood Light is an advanced outdoor lighting solution featuring a motion sensor and remote control. It is designed to provide efficient and reliable illumination for various outdoor areas such as gardens, garages, pathways, and balconies. With its high-capacity battery and efficient solar panel, it offers long-lasting brightness and enhanced security.

Image: The intelamp Solar Flood Light unit, showing the three adjustable lamp heads, the separate solar panel, and the included remote control.

2. Nodweddion Allweddol

• Gweithrediad rheoli o bell: Equipped with a comprehensive remote for easy control of settings and modes.
• Adjustable Sensing Time: Motion sensor highlight time can be set to 20, 30, or 40 seconds.
• Goleuadau Ongl Eang: Three adjustable lamp heads provide a 270° wide-angle illumination.
• Moddau Goleuo Lluosog: Features 4 distinct lighting modes to suit various needs.
• Panel Solar Effeithlonrwydd: Large 40 sq. inch solar panel for faster and more efficient charging.
• Batri Capasiti Uchel: 6000mAh battery provides up to 3 nights of illumination in sensing mode.
• Dual Sensor Design: Two motion sensors offer 180-degree detection, covering a wider area and reducing blind spots.
• IP65 dal dŵr: Durable construction ensures reliable performance in various weather conditions.
• Gosodiad Hawdd: Comes with screws and cable ties for flexible mounting options on walls, fences, or poles.

Image: An outdoor patio and lawn illuminated by the intelamp solar flood light, demonstrating its 1200LM high brightness and 270-degree wide-angle lighting coverage.

3. Cynnwys Pecyn

Gwiriwch y pecyn yn ofalus i sicrhau bod yr holl eitemau yn bresennol:

• 1 x intelamp Solar Flood Light Unit
• 1 x Solar Panel (with 9.8ft cable)
• 1 x Rheolaeth Anghysbell
• Sgriwiau Mowntio a Phlygiau Wal
• Tei Cebl
• 1 x Llawlyfr Defnyddiwr

4. manylebau

Image: Detailed dimensions of the solar panel (9.4 inches by 4.3 inches) and the light unit (12 inches wide), along with the 9.8ft cable length and the dual sensor design.

5. Gwybodaeth Diogelwch

Please read all safety instructions before installation and use.

• Do not disassemble or modify the product. Unauthorized modifications may cause damage or injury.
• Gwnewch yn siŵr bod y panel solar wedi'i osod mewn lleoliad sy'n derbyn golau haul uniongyrchol ar gyfer gwefru gorau posibl.
• Keep the product away from fire, heat sources, and flammable materials.
• Do not immerse the product in water. While IP65 rated, prolonged submersion can cause damage.
• Handle the product with care to avoid damage to the solar panel or light components.
• When installing, ensure the mounting surface is stable and can support the weight of the light.
• Cadwch allan o gyrraedd plant.

6. Gosod a Gosod

Follow these steps for proper installation of your intelamp Solar Flood Light:

1. Dewiswch leoliad gosod: Select a location where the solar panel can receive at least 6-8 hours of direct sunlight daily. The light unit should be positioned to cover the desired area. Ensure the 9.8ft cable length is sufficient to connect the solar panel to the light unit.
2. Mount y Panel Solar: Secure the solar panel to a wall, roof, or other stable surface using the provided screws. Adjust the angle of the solar panel to maximize sun exposure.
3. Mount the Light Unit: The light unit can be mounted in two ways:
   • Gosod Wal: Use the provided screws and wall plugs to secure the light unit to a wall. Ensure the hole spacing (approx. 3.5 inches) is correct. Rotate the solar panels from side to side and the central lamp vertically up and down to provide space for screw installation.
   • Gosod Tei Cebl: Insert the cable ties through the mounting holes on the back of the light unit. Tie the light to a pole, tree trunk, or similar structure.
4. Cysylltwch y Panel Solar â'r Uned Golau: Plug the cable from the solar panel into the designated port on the light unit. Ensure a secure connection.
5. Addasu Lamp Pennau: Manually adjust the three lamp heads to direct light to your desired areas, providing up to 270° wide-angle coverage.

Image: Illustrations demonstrating two installation methods: wall mounting with screws and pole/tree mounting using cable ties. It also shows how to adjust the lamp heads for screw access.

7. Cyfarwyddiadau Gweithredu

Your intelamp Solar Flood Light is controlled by the included remote. Ensure the remote has a working AAA battery (included).

Delwedd: Manwl view of the remote control, highlighting buttons for ON/OFF, sensing time (20s, 30s, 40s), lighting modes (Dim Sensor Mode, Dim Lighting Mode), and brightness adjustment (60%, 80%, 100%).

Defnydd Cychwynnol:

Before first use, allow the solar panel to charge the light for at least 6-8 hours in direct sunlight. The light will automatically turn on at dusk once charged.

Swyddogaethau rheoli o bell:

• YMLAEN / I FFWRDD: Press the red 'OFF' button to turn off the light, and the green 'ON' button to turn on.
• Sensing Highlight Time: Adjust how long the light stays at high brightness after motion detection. Options: 20s, 30s, 40s.
• Dulliau goleuo: Select from 4 distinct modes:
1. Mode 1 (Strong Light Motion Sensor Mode - Dim to Strong to Dim): Low brightness always on. Turns to 100% brightness when motion is detected, then dims back to 20% brightness after 20/30/40 seconds (based on setting) when no motion is detected.


Image: Visual representation of Mode 1, showing the light at 20% brightness, increasing to 100% upon motion detection, and returning to 20% after the set time.

2. Mode 2 (Strong Light Motion Sensor Mode - Closure to Strong to Closure): Light is off when no motion is detected. Turns to 100% brightness when motion is detected, then turns off after 20/30/40 seconds (based on setting) when no motion is detected.


Image: Visual representation of Mode 2, showing the light off, increasing to 100% brightness upon motion detection, and turning off after the set time.

3. Mode 3 (Long Light Mode - Motion Sensor Disabled, Dims after Timing): Turns on at 80% brightness at night. After a set timing (2H, 4H, 6H, 8H, 10H, 12H), it dims to 20% brightness until dawn.


Image: Visual representation of Mode 3, showing the light at 80% brightness, then dimming to 20% brightness after a set timer.

4. Mode 4 (Long Light Mode - Motion Sensor Disabled, Turns Off after Timing): Turns on at 80% brightness at night. After a set timing (2H, 4H, 6H, 8H, 10H, 12H), it turns off completely. It will automatically turn on after dark the next day.


Image: Visual representation of Mode 4, showing the light at 80% brightness, then turning off completely after a set timer.

• Addasiad Disgleirdeb: In modes where constant brightness is maintained (Modes 3 & 4), you can adjust the brightness level to 60%, 80%, or 100% using the sun icon buttons on the remote.

8. cynnal

To ensure optimal performance and longevity of your solar flood light, follow these maintenance guidelines:

• Panel Solar Glân: Sychwch y panel solar yn rheolaidd gyda lliain meddal, damp cloth to remove dust, dirt, leaves, or snow. A clean panel ensures maximum sunlight absorption and efficient charging.
• Clean Light Unit: Periodically clean the light unit and sensor lenses to ensure clear light output and accurate motion detection.
• Gwirio Cysylltiadau: Occasionally inspect the cable connection between the solar panel and the light unit to ensure it remains secure and free from corrosion.
• Amnewid Batri (Pell): If the remote control stops responding, replace its AAA battery.

9. Datrys Problemau

If you encounter issues with your intelamp Solar Flood Light, refer to the following common problems and solutions:

10. Gwarant a Chefnogaeth

For warranty information, technical assistance, or any product-related inquiries, please contact intelamp customer service. You can typically find contact details on the product packaging, the official intelamp websafle, neu drwy'r manwerthwr lle prynoch chi'r cynnyrch.

Please have your model number (12B-CA-parent) and purchase details ready when contacting support.