DECKED XT1

Llawlyfr Cyfarwyddiadau System Storio Gwely Tryc DECKED

Model: XT1

Compatible with Toyota Tundra (2007-2021) 5'7"

1. Rhagymadrodd a Throsoddview

The DECKED Truck Bed Storage System is an American-made, in-vehicle storage solution designed to maximize the utility of your truck bed. It provides weatherproof, secure, and ergonomic storage for tools, gear, and valuables, while maintaining the full cargo-carrying capabilities of your truck bed. The system features full bed-length drawers for organized storage below, and a heavy-duty flat deck above capable of supporting up to 2,000 lbs of cargo. It is an ideal solution for tradesmen, outdoor enthusiasts, and anyone requiring rugged and organized storage.

DECKED Truck Bed Storage System with drawers extended

Figure 1.1: The DECKED Truck Bed Storage System with drawers fully extended, showcasing y ample storio.

Brig view of the DECKED Truck Bed Storage System

Ffigur 1.2: Gorbenion view of the DECKED system installed in a truck bed, highlighting the flat deck surface.

2. Nodweddion Cynnyrch

  • Cydnawsedd: Specifically designed for Toyota Tundra models from 2007-2021 with a 5'7" truck bed length.
  • Massive Storage & Payload: Offers significant storage volume in two full bed-length drawers. The heavy-duty flat deck supports up to 2,000 lbs of cargo. Each drawer has a 200 lb payload capacity.
  • Weatherproof & Secure: Features updated drawer seals to protect contents from car washes, dust, and particulates. While not airtight, closeout panels minimize airborne particles. Drawers are secured via the locking tailgate or an optional keyed lock accessory (not included).
  • Adeiladu Gwydn: Manufactured in the USA from recycled High-Density Polyethylene (HDPE) co-molded to a galvanized steel sub-frame. Built to withstand extreme weather and intense UV light exposure.
  • Gosod a Thynnu Hawdd: Initial installation typically takes 2-3 hours using common hand tools. Subsequent removal or re-installation can be completed in approximately 15 minutes.
  • Cysondeb Affeithiwr: Compatible with DECKED D-Co modular organization accessories (not included) for enhanced organization.
Diagram showing massive storage and payload capacity

Figure 2.1: Visual representation of the system's 2000 lb payload capacity and included stash bins.

Truck bed storage system being sprayed with water to demonstrate weatherproof design

Figure 2.2: A demonstration of the system's weatherproof capabilities, showing water being poured over it.

3. Affeithwyr wedi'u cynnwys

Your DECKED Truck Bed Storage System comes with the following accessories to help you organize your gear:

  • ONE Desert Tan D-co Case Sixer 16
  • ONE Desert Tan D-co Case Halfrack 32
  • ONE Drawerganizer Drawer Bin
  • TWO Drawer Dividers
  • TWO Shallow Stash Bins
  • TWO Deep Stash Bins
  • FOUR D-Ring Tie-downs
Image showing all included accessories for the DECKED system

Figure 3.1: A visual display of the various accessories included with your DECKED system.

4. Gosod a Gosod

Initial installation of the DECKED system typically takes 2 to 3 hours using common hand tools. The system is compatible with spray-in liners and most bed rugs, but it is NID compatible with drop-in plastic bed liners.

Offer Angenrheidiol:

  • 1/2 inch open-ended wrench
  • Phillips sgriwdreifer
  • 7/32 inch hex wrench
  • Soced 3/8 modfedd
  • Soced 17/16 modfedd

Camau Gosod:

  1. Paratowch y Gwely Lori: Ensure your truck bed is clean and clear of any debris.
  2. Assemble the System: Follow the detailed instructions provided in the packaging for assembling the DECKED system components.
  3. Position the System: Carefully place the assembled system into your truck bed.
  4. Secure the System: Use the provided J-hooks to secure the system to your truck bed. Ensure the system is centered and aligned with the ribs or troughs on your bed floor for proper fitment. Snug the J-hooks down, but do not overtighten.
  5. Gosod Droriau: Slide the drawers into their respective compartments.
  6. Atodwch Ategolion: Place the included accessories (D-co cases, Drawerganizer, dividers, stash bins) into the drawers as desired.
All components of the DECKED system laid out for assembly

Figure 4.1: All system components laid out, ready for assembly and installation.

Video Guide: How to Remove & Re-Install your DECKED System

Video 4.1: This official DECKED video provides a visual guide on how to remove and re-install your DECKED system from your truck bed, including tool usage and key steps like removing the ruler, J-hooks, and drawers.

5. Cyfarwyddiadau Gweithredu

The DECKED system is designed for ease of use and accessibility.

Gweithrediad drôr:

  • To open a drawer, simply pull the handle outwards. The drawers are equipped with a smooth slide mechanism for easy access.
  • To close a drawer, push it firmly back into the system until it latches securely.

Deck Usage:

  • The flat deck surface can be used to haul large items, supporting up to 2,000 lbs.
  • Utilize the integrated D-Ring tie-downs to secure cargo on top of the deck.

6. cynnal

The DECKED system is built for durability and low maintenance. Regular cleaning and inspection will ensure its longevity.

  • Glanhau: Clean the system with mild soap and water as needed. Avoid harsh chemicals that may damage the HDPE material.
  • Drawer Seals: Periodically inspect the drawer seals for any signs of wear or damage. While designed to protect against elements, maintaining the seals ensures optimal performance.
  • Rhannau Symudol: The slide mechanism and wheels are designed for smooth operation. Keep them free of excessive dirt or debris.

7. Datrys Problemau

Dyma rai materion cyffredin a'u hatebion:

  • Droriau ddim yn llithro'n esmwyth: Check for any obstructions in the drawer tracks or debris on the wheels. Clean the tracks and wheels if necessary.
  • Mynediad dŵr neu lwch: Ensure the tailgate is properly closed and locked. Inspect the drawer seals for any damage or misalignment. While drawers are not airtight, closeout panels should minimize particulates.
  • System appears misaligned after re-installation: Truck beds can frequently be out of square. When centering your system, use the ribs or troughs on your truck bed floor as the true reference for alignment, rather than the truck bed sides.

8. manylebau

PriodoleddManylyn
BrandDECKED
ModelDrawer System compatible with Toyota Tundra (2007-2021) 5'7"
Rhif Model yr EitemXT1
UPC850025181358
LliwAnialwch Tan
DeunyddRecycled High-Density Polyethylene (HDPE) and Steel
Nodwedd ArbennigWeathertight
Dimensiynau Cynnyrch (L x W x H)64" x 72" x 12"
Math CauLatch or Clip On
Lefel Gwrthsefyll DŵrYmlid dwr
Mecanwaith AgoriadolLlithro
Nifer yr Adrannau2
Maximum Deck Weight Recommendation2,000 Bunt
Maximum Drawer Weight Recommendation200 Pounds per drawer

9. Gwarant a Chefnogaeth

The DECKED Truck Bed Storage System is built with quality and durability in mind. It is Gwarantedig am Oes, reflecting the manufacturer's commitment to excellence and customer satisfaction.

For any questions, technical assistance, or warranty claims, please contact DECKED customer support directly. Refer to the contact information provided with your product packaging or visit the official DECKED websafle am y manylion cymorth diweddaraf.

© 2024 DECKED. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.