Llawlyfr Defnyddiwr Ffan Gwacáu Ystafell Ymolchi VEVOR

Cynnyrch Drosview

The VEVOR Bathroom Exhaust Fan is designed to provide efficient ventilation and lighting for your bathroom. Featuring an all-copper motor for low noise operation and 8 customizable LED colors, it enhances both functionality and ambiance. This energy-saving unit offers 110 CFM airflow, humidity control, and timer shutdown options, all controllable via a remote.

Figure 1: VEVOR Bathroom Exhaust Fan Unit

Gwybodaeth Diogelwch

Darllenwch yr holl gyfarwyddiadau yn ofalus cyn eu gosod a'u defnyddio. Gall methu â dilyn y cyfarwyddiadau hyn arwain at sioc drydanol, tân neu anaf difrifol.

• Always disconnect power at the circuit breaker before servicing or installing the fan.
• All wiring must comply with local and national electrical codes. If you are unsure about wiring, consult a qualified electrician.
• Do not install this fan in a ceiling with insulation that exceeds R-50.
• Gwnewch yn siŵr bod y gefnogwr wedi'i seilio'n iawn.
• Do not use this fan in areas where it may be exposed to water spray from a shower or bathtub.
• Keep all foreign objects away from the fan blades during operation.
• Mae'r cynnyrch hwn wedi'i gynllunio ar gyfer defnydd dan do yn unig.

Cynnwys Pecyn

Gwiriwch fod yr holl gydrannau yn bresennol ac yn ddi-ddifrod cyn dechrau'r gosodiad.

• VEVOR Bathroom Exhaust Fan Unit (Model: BT-BPT280AS)
• Rheolaeth Anghysbell
• Caledwedd Mowntio (sgriwiau, angorau wal)
• Llawlyfr Defnyddiwr

Figure 2: Included Components and Specifications

Gosodiad

This section provides step-by-step instructions for installing the VEVOR Bathroom Exhaust Fan. Ensure power is disconnected before starting.

1. Paratoi Agoriad: Create a ceiling opening of approximately 7.68 inches x 7.6 inches.
2. Secure Fan Unit: Insert the fan unit into the prepared opening. Secure the exhaust fan to a beam or wall pillar using appropriate screws.
3. Cysylltu Wiring: Connect the fan's wiring to your household electrical wiring. Match the corresponding wire colors (e.g., fan's white wire to house's white wire, black to black, green to ground). Ensure all connections are secure with wire nuts.
4. Install Exhaust Duct: Attach a 4-inch exhaust duct to the fan's exhaust port. Secure it with tape or clamps to ensure an airtight seal. (Exhaust duct not included).
5. Attach Light Panel: Connect the lighting wire from the fan unit to the light panel. Carefully snap the light panel onto the fan unit, ensuring it is securely fastened.
6. Paru Rheolaeth Anghysbell: After turning on the power to the fan, within 5 seconds, press and hold the "Match Code" button on the remote control until you hear a "Didi" sound. This indicates successful pairing.

Figure 3: Installation Steps Overview

Gweithrediad

The VEVOR Bathroom Exhaust Fan is operated using the provided remote control. The fan and light can be controlled independently.

Swyddogaethau rheoli o bell:

• Botwm Pŵer: Turns the fan and/or light on/off.
• Rheoli Cyflymder Fan: Adjusts the fan speed (multiple levels available).
• Golau Ymlaen / Diffodd: Toggles the main light.
• Botwm Newid Lliw: Cycles through 8 customizable LED colors.
• Addasiad Tymheredd Lliw: Changes the main light's color temperature (3000K, 4000K, 5000K).
• Gosodiadau Amserydd: Sets the fan to operate for a specified duration (30, 60, 90, 120 minutes).
• Rheoli Lleithder: Activates smart mode for humidity-based auto airflow. The fan will adjust its operation based on detected humidity levels (e.g., MAX 110 CFM for humidity ≥70%, MIN 80 CFM for humidity <70%).

Figure 4: Remote Control and Operation Features

Figure 5: Customizable LED Colors

Cynnal a chadw

Mae cynnal a chadw rheolaidd yn sicrhau perfformiad a hirhoedledd gorau posibl eich ffan gwacáu. Datgysylltwch y pŵer bob amser cyn gwneud unrhyw waith cynnal a chadw.

• Glanhau'r Grille: Periodically remove the light panel/grille and wipe it with a soft, damp brethyn. Peidiwch â defnyddio glanhawyr sgraffiniol.
• Glanhau'r Llafnau Ffan: Os yw'n hygyrch, sychwch y llafnau ffan yn ysgafn gydag hysbyseb.amp brethyn i gael gwared â llwch a malurion.
• Archwiliad Dwythellau: Annually inspect the ductwork for any blockages, leaks, or damage. Ensure proper airflow.

Datrys problemau

If you encounter issues with your VEVOR Bathroom Exhaust Fan, refer to the following common problems and solutions:

Manylebau

Detailed technical specifications for the VEVOR Bathroom Exhaust Fan.

Gwarant a Chefnogaeth

For warranty information, technical support, or replacement parts, please contact VEVOR customer service. Keep your purchase receipt and model number handy for faster service.

Ewch i'r VEVOR swyddogol websafle ar gyfer y wybodaeth gymorth ddiweddaraf: www.vevor.com