ST-5155 Satellite Signal Meter User Manual

1. Rhagymadrodd

The SZBOX ST-5155 is a versatile and portable signal meter designed for the installation and verification of digital satellite, terrestrial, and cable television signals. This device supports DVB-S/S2/S2X, DVB-T/T2, and DVB-C standards, featuring H.264/H.265 (10-bit) decoding. It is an essential tool for professionals and enthusiasts alike, providing real-time signal analysis and display.

Key features include a 4.3-inch LCD screen, automatic AZ/EL angle calculation, loop search, LNB short-circuit protection, and a built-in rechargeable battery for extended use. This manual provides detailed instructions to help you effectively use your ST-5155 signal meter.

2. Cynnyrch Drosview

3. Gosod a Defnydd Cyntaf

3.1 Codi Tâl ar y Dyfais

Before first use, ensure the ST-5155 is fully charged. Connect the provided 12V power adapter to the DC IN port on the device and plug it into a power outlet. The charging indicator will illuminate. A full charge typically takes approximately 3-4 hours and provides about 5 hours of operation.

3.2 Pŵer Cychwynnol Ymlaen

Pwyswch a dal y GRYM button located on the front panel to turn on the device. The 4.3-inch LCD screen will display the boot-up sequence.

3.3 Language and Regional Settings

Upon first power-on, you may be prompted to select your preferred language and region. Navigate using the arrow keys and confirm with the OK button. These settings can be adjusted later in the System Settings menu.

4. Cyfarwyddiadau Gweithredu

4.1 Satellite Signal Measurement (DVB-S/S2/S2X)

1. Connect your LNB cable from the satellite dish to the LNB YN port on the ST-5155. The device provides LNB power (13V/18V, IMax 350mA) and short-circuit protection.
2. Gwasgwch y SAT button to enter the Satellite Measurement mode.
3. Select the desired satellite from the pre-stored list or add a new one. Use the arrow keys to navigate and OK i ddewis.
4. Adjust LNB Frequency, Transponder, Symbol Rate, and Polarization as needed.
5. Align your satellite dish while observing the signal strength and quality indicators on the screen. The device supports automatic AZ/EL angle calculation to assist with alignment.
6. Once a signal is locked, the device will emit an audible tone (Dolby AC3 supported) and display real-time video (if available) and channel information.
7. Defnyddiwch y SCAN button to perform a channel scan (Auto, Blind, or Manual).

4.2 Terrestrial Signal Measurement (DVB-T/T2)

1. Cysylltwch eich cebl antena daearol â'r ANT YN port. The device provides ANT power (5V, 12V).
2. Gwasgwch y SYS button and select DVB-T/T2 mode.
3. Select the appropriate channel or frequency range.
4. Adjust your antenna for optimal signal strength and quality.
5. Perform a channel scan to find available terrestrial channels.

4.3 Cable Signal Measurement (DVB-C)

1. Connect your cable TV signal to the ANT YN porthladd.
2. Gwasgwch y SYS button and select DVB-C mode.
3. Enter the required parameters such as frequency, symbol rate, and QAM modulation.
4. Monitor the signal quality and strength.
5. Perform a channel scan to detect available cable channels.

4.4 Media Playback and System Functions

• HDMI/AV Output: Connect an HDMI cable to the HDMI ALLAN port or AV cables to the AV ALLAN port to display the signal on an external monitor or TV.
• Swyddogaethau USB: The USB 2.0 port can be used for software upgrades and media playback (e.g., video, audio, images) from a USB drive.
• Swyddogaeth Torch: Activate the built-in LED torch for illumination in dark environments.
• Gosodiadau System: Cyrchwch y BWYDLEN and navigate to "System Settings" to adjust display, audio, time, and other device parameters.

5. cynnal

5.1 Glanhau

Wipe the device with a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as they may damage the screen or casing. Sicrhewch fod pob porthladd yn rhydd o lwch a malurion.

5.2 Gofal Batri

The ST-5155 uses a built-in 7.4V/2600mAh Lithium-ion battery. To prolong battery life:

• Osgowch ollwng y batri'n llwyr yn aml.
• Store the device in a cool, dry place if not used for extended periods, with the battery charged to about 50%.
• Use only the original charger provided with the device.

5.3 Diweddariadau Meddalwedd

Software updates may be released to improve performance or add new features. Check the manufacturer's official website (if available) for the latest firmware. Updates are typically performed via the USB port. Follow the specific instructions provided with the update file yn ofalus.

6. Datrys Problemau

7. Manylebau Technegol

8. Gwybodaeth Gwarant

Specific warranty terms and conditions for the SZBOX ST-5155 are typically provided at the point of purchase or within the product packaging. Please refer to your purchase receipt or the warranty card included with your device for detailed information regarding warranty duration, coverage, and claims process.

Generally, the manufacturer warrants this product against defects in materials and workmanship under normal use for a specified period from the original date of purchase. This warranty does not cover damage caused by accident, misuse, abuse, unauthorized modification, or improper installation.

9. Cefnogaeth i Gwsmeriaid

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact SZBOX customer support. While specific contact details are not provided here, you can typically find support information on the official SZBOX websafle neu drwy eich manwerthwr cynnyrch.

When contacting support, please have your product model (ST-5155) and purchase information readily available to facilitate a quicker resolution.