1. Rhagymadrodd
Thank you for choosing the Havit PA304 Projector Ceiling and Wall Mount. This mount is designed to securely hold your projector, offering flexible positioning with 360-degree rotation and adjustable height. Please read this manual carefully before installation and use to ensure proper setup and safe operation.
Ffigur 1: Havit PA304 Projector Mount. This image displays the main components of the Havit PA304 mount, including the mounting plate, adjustable arm, and projector attachment head.
2. Gwybodaeth Diogelwch
- Ensure the mounting surface (ceiling or wall) can support the combined weight of the mount and your projector. The maximum load capacity for this mount is 3 kg.
- Peidiwch â bod yn fwy na'r cynhwysedd pwysau uchaf o 3 kg.
- Use appropriate tools and follow all installation steps carefully to prevent injury or damage to the product or property.
- Os ydych chi'n ansicr ynghylch unrhyw ran o'r broses osod, ymgynghorwch â gweithiwr proffesiynol cymwys.
- Cadwch rannau bach a deunyddiau pecynnu i ffwrdd o blant.
- Regularly check all screws and connections to ensure they remain secure.
3. Cynnwys Pecyn
Gwiriwch fod yr holl gydrannau yn bresennol cyn dechrau'r gosodiad.
- Havit PA304 Projector Mount Assembly
- Screw Mounting Kit (includes screws and wall anchors)
Nodyn: Projector and installation tools (drill, screwdriver, pencil, measuring tape) are not included.
4. Cyfarwyddiadau Gosod
The Havit PA304 mount can be installed on either a ceiling or a wall. Follow the steps below for your desired mounting location.
4.1. Offer Angenrheidiol (Heb eu Cynnwys)
- Dril
- Sgriwdreifer (argymhellir pen Phillips)
- Pensil
- Tâp Mesur
4.2. Mounting the Bracket to the Ceiling or Wall
- Dewis Lleoliad: Choose a suitable location on your ceiling or wall that is structurally sound and can support the weight. Ensure there are no electrical wires or pipes behind the drilling area.
- Mark Drill Holes: Hold the mounting plate of the Havit PA304 mount against the desired surface. Use a pencil to mark the positions for the drill holes.
- Tyllau Dril: Using an appropriate drill bit for your wall/ceiling material, drill pilot holes at the marked positions. Insert the wall anchors (if required for your surface type) into the drilled holes.
- Plât Mowntio Diogel: Align the mounting plate with the drilled holes and secure it firmly using the provided screws and a screwdriver. Ensure the plate is level and tightly fastened.
Image for this step (e.g., "PA304_MountingPlate_Installation.jpg") is not available in the provided data.
4.3. Attaching the Projector to the Mount
- Identify Projector Mounting Point: Locate the universal mounting screw hole on the bottom of your projector.
- Attach Projector: Carefully align the projector's mounting hole with the screw on the projector attachment head of the Havit PA304 mount. Screw the projector onto the mount until it is secure. Do not overtighten.
- Gwirio Sefydlogrwydd: Gently test the projector's stability on the mount. It should feel firm and not wobble.
Image for this step (e.g., "PA304_Projector_Attachment.jpg") is not available in the provided data.
5. Gweithrediad ac Addasiad
The Havit PA304 mount offers flexibility for optimal projector positioning.
- Cylchdro 360-gradd: The projector attachment head can rotate 360 degrees. Loosen the adjustment knob/screw on the head, position your projector to the desired angle, and then tighten the knob/screw to secure it.
- Addasiad Uchder: The mount allows for height adjustment between 27.5 cm and 39 cm. Loosen the height adjustment mechanism (usually a collar or screw on the main pole), extend or retract the pole to the desired height, and then firmly tighten the mechanism to lock it in place.
- Addasiad Ongl: Some projectors may require slight tilting. The mount's head allows for minor tilt adjustments. Loosen the relevant screw, adjust the projector's vertical angle, and then retighten.
Image illustrating adjustment points (e.g., "PA304_Adjustment_Points.jpg") is not available in the provided data.
6. cynnal
- Glanhau: Sychwch y mowntiad gyda lliain meddal, sych. Peidiwch â defnyddio glanhawyr sgraffiniol na thoddyddion, gan y gallant niweidio'r gorffeniad.
- Gwiriadau Rheolaidd: Periodically inspect all screws and connections to ensure they are tight and secure. Over time, vibrations or adjustments can cause screws to loosen.
- Terfyn pwysau: Always ensure that the total weight of your projector does not exceed the 3 kg maximum load capacity.
7. Datrys Problemau
| Problem | Achos Posibl | Ateb |
|---|---|---|
| Mount feels unstable or wobbly. | Screws are loose; mounting surface is not strong enough; projector weight exceeds limit. | Tighten all mounting screws. Ensure the mounting surface is solid. Verify projector weight is within 3 kg. |
| Cannot adjust height or rotation. | Adjustment mechanisms are too tight. | Loosen the relevant adjustment knob/screw before attempting to adjust. Retighten after positioning. |
| Projector does not fit the mount. | Projector lacks a universal mounting screw hole or has an unusual design. | Ensure your projector has a standard 1/4-inch screw hole for mounting. This mount is designed for projectors with a single mounting point. |
8. manylebau
| Enw Model | Havit PA304 |
| Rhif Model | PA304 |
| Brand | havit |
| Deunydd | Metel |
| Math Mount | Mount Nenfwd, Wal Mount |
| Cynhwysedd Pwysau Uchaf | 3 kg (6.6 pwys) |
| Ystod Uchder Addasadwy | 27.5 cm - 39 cm (10.8 modfedd - 15.3 modfedd) |
| Cylchdro | 360 Gradd |
| Cydrannau wedi'u Cynnwys | Mount assembly, screw mounting kit |
9. Gwarant a Chefnogaeth
The Havit PA304 Projector Mount comes with a Gwarant 2 mlynedd from the date of purchase. This warranty covers manufacturing defects under normal use. It does not cover damage caused by improper installation, misuse, accidents, or unauthorized modifications.
For technical support, warranty claims, or further inquiries, please contact your local Havit dealer or visit the official Havit website for contact information. Please retain your proof of purchase for warranty service.