Fernco QC-103

Llawlyfr Cyfarwyddiadau Cap Pibell PVC Hyblyg Fernco QC-103 Qwik Cap

Model: QC-103 | Brand: Fernco

1. Cynnyrch Drosview

The Fernco QC-103 Qwik Cap is designed for capping pipe ends in various plumbing applications. These flexible PVC caps provide a leak-proof and water-tight seal, suitable for both above-ground and underground use. They are ideal for testing pipes or permanently sealing pipe ends and cleanouts. Constructed from high-quality elastomeric polyvinyl chloride and featuring corrosion-resistant stainless steel clamps, the Qwik Cap offers a reliable and durable solution for your plumbing needs.

Two Fernco QC-103 Qwik Caps with stainless steel clamps

Figure 1: Two Fernco QC-103 Qwik Caps. Each cap is black, made of flexible PVC, and secured with a stainless steel clamp.

2. Gwybodaeth Diogelwch

Always prioritize safety when working with plumbing systems. Please observe the following guidelines:

  • Gwisgwch offer amddiffynnol personol (PPE) priodol, fel menig ac amddiffyniad llygaid.
  • Sicrhewch fod y man gwaith wedi'i awyru'n dda.
  • Turn off water supply if working on a pressurized system.
  • Handle tools carefully to prevent injury.
  • Cadwch blant ac anifeiliaid anwes i ffwrdd o'r ardal waith.
  • Consult a professional plumber if you are unsure about any aspect of the installation.

3. Nodweddion Cynnyrch

  • Adeiladu Gwydn: Made from high-quality elastomeric polyvinyl chloride for long-lasting performance.
  • Ffit Hyblyg: Designed to accommodate pipe outside diameters (ODs) between 3.25 and 3.70 inches, with an internal diameter (ID) of 3.50 inches.
  • Cais Amlbwrpas: Suitable for permanent capping of pipe ends and cleanouts, or temporary use for pipe testing, both above and below ground.
  • Gosodiad Hawdd: No need for messy primers or glues. Installs quickly with a screwdriver, nut driver, or torque wrench.
  • Corrosion-Resistant Clamps: Features 300-grade stainless steel clamps that are rustproof and resistant to corrosion.
  • Code Compliant: Conforms to ASTM D 5926, C 1173 CSA B602, and is UPC Approved.
  • Graddio pwysau: Maximum working pressure of 4.3 PSI.

4. Cynnwys Pecyn

Your Fernco QC-103 Qwik Cap package includes:

  • Two (2) Fernco QC-103 Flexible PVC Pipe Caps
  • Two (2) Stainless Steel Clamps (pre-attached)

5. Manylebau Cynnyrch

PriodoleddManylyn
Rhif ModelQC-103
DeunyddElastomeric Polyvinyl Chloride (PVC)
Clamp Deunydd300 Cyfres Dur Di-staen
LliwDu
Maint Pibell Enwol3 modfedd
Internal Diameter (ID)3.50 modfedd
Fits Pipe Outside Diameter (OD)3.25 - 3.70 modfedd
Pwysau Gweithio Uchaf4.3 PSI
Dimensiynau Cynnyrch (L x W x H)3 x 1.94 x 3.5 modfedd
Pwysau Eitem12 ounces (per cap)
ArdystiadauASTM D 5926, C 1173 CSA B602, UPC Approved

6. Cyfarwyddiadau Gosod

Follow these steps for proper installation of the Fernco QC-103 Qwik Cap:

  1. Paratowch y bibell: Ensure the end of the pipe to be capped is clean and free of debris. Measure the outside diameter (OD) of your pipe to confirm it falls within the cap's compatible range of 3.25 to 3.70 inches.
  2. Gosodwch y Cap: Slide the Fernco Qwik Cap over the end of the pipe. The flexible PVC material allows for a snug fit.
  3. Tynhau'r Clamp: Use a screwdriver, nut driver, or torque wrench to tighten the stainless steel clamp. Tighten evenly until the cap is securely fastened and a water-tight seal is achieved. Avoid over-tightening, which could damage the cap or pipe.
  4. Gwirio Sêl: For applications involving liquids or gases, perform a leak test to ensure the cap is properly sealed.
Close-up of a single Fernco QC-103 Qwik Cap

Ffigur 2: Agos view of a single Fernco QC-103 Qwik Cap, highlighting the flexible PVC material and the stainless steel clamp mecanwaith.

7. Gweithredu a Chymhwyso

The Fernco QC-103 Qwik Cap can be used for various applications:

  • Permanent Capping: Use to permanently seal off unused pipe ends or cleanouts in DWV (Drain, Waste, Vent) systems.
  • Temporary Testing: Apply the cap to temporarily seal pipes for pressure testing or to prevent debris entry during construction or repair.
  • Above or Below Ground: The durable materials are suitable for both exposed and buried installations.

8. cynnal

The Fernco QC-103 Qwik Cap requires minimal maintenance:

  • Arolygiad Cyfnodol: Periodically check the cap and clamp for any signs of wear, damage, or loosening, especially in outdoor or underground applications.
  • Glanhau: If necessary, clean the exterior of the cap with mild soap and water. Avoid harsh chemicals that could degrade the PVC material.
  • Ail-dynhau: If any loosening is observed, re-tighten the stainless steel clamp to ensure a secure seal.

9. Datrys Problemau

If you encounter issues with your Qwik Cap, consider the following:

  • Gollyngiad:
    • Sicrhewch y clamp is sufficiently tightened.
    • Verify that the pipe's outside diameter (OD) is within the specified range (3.25 - 3.70 inches) for the QC-103 cap.
    • Inspect the cap for any visible damage or cracks. Replace if damaged.
  • Anhawster gosod:
    • Confirm the pipe size matches the cap's specifications.
    • Ensure the pipe end is smooth and free of burrs that might obstruct installation.

If problems persist, contact Fernco customer support or a qualified plumbing professional.

10. Gwarant a Chefnogaeth

Fernco products are manufactured to high standards of quality and performance. For specific warranty information, please refer to the official Fernco websafle neu cysylltwch â'u hadran gwasanaeth cwsmeriaid. Cadwch eich derbynneb prynu fel prawf o brynu.

For technical assistance, product inquiries, or support, please visit the official Fernco website or contact their customer support channels. You can often find contact information and FAQs on the manufacturer's websafle:

© 2025 Fernco Inc. All rights reserved. This manual is for informational purposes only.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.