1. Rhagymadrodd
This user manual provides essential information for the safe and effective installation, operation, and maintenance of the Akozon PIR-8 Motion Sensor Switch Module. This device is designed to automatically control LED lights and LED strips by detecting human body infrared motion, offering convenience and energy efficiency. Please read this manual thoroughly before use and retain it for future reference.
Figure 1: Akozon PIR-8 Motion Sensor Switch Module and accompanying manual.
2. Nodweddion Cynnyrch
- Primarily used for controlling LED lamps and LED strips.
- Enables automatic light activation and deactivation through human body infrared detection.
- Designed for easy installation and user-friendly operation.
- Compatible with various lighting types, including incandescent lamps, l arbed ynniamps, LED lamps, a fflwroleuol lamps.
- Provides soft and stable light control, preventing flickering.
3. Gwybodaeth Diogelwch
Dilynwch y rhagofalon diogelwch canlynol i atal anaf neu ddifrod i'r ddyfais:
- Sicrhewch fod y cyflenwad pŵer wedi'i ddatgysylltu cyn gosod neu gynnal a chadw.
- Installation should be performed by a qualified electrician or knowledgeable individual.
- Peidiwch â bod yn fwy na'r mewnbwn penodedig cyftage a graddfeydd cyfredol.
- Avoid installing the sensor in direct sunlight, near heat sources, or in areas with significant air currents, as this may affect performance.
- Cadwch y ddyfais i ffwrdd o ddŵr ac amgylcheddau lleithder uchel.
- Peidiwch â cheisio dadosod neu addasu'r ddyfais.
4. manylebau
| Paramedr | Gwerth |
|---|---|
| Model | PIR-8 |
| Tymheredd Gweithio | -20 i +60 ℃ |
| Mewnbwn Voltage | DC 12V - 24V (10.5-16V or 21-32V) |
| Allbwn Voltage | DC 12V - 24V (10.5-16V or 21-32V) |
| Pellter Sefydlu | Hyd at 8 metr |
| Ongl Sefydlu | 60 gradd |
| Amser Oedi | 1-10 munud (Addasadwy) |
| Dimensiynau (L x W x H) | 7.7 cm x 4.6 cm x 3.4 cm (tua 3.03 x 1.81 x 1.34 modfedd) |
| Pwysau | Tua. 50g |
| Deunydd | Plastig a Metel |
Figure 2: Physical dimensions of the PIR-8 module.
5. Gosod a Gosod
Dilynwch y camau hyn ar gyfer gosod priodol:
- Datgysylltu Pŵer: Before starting, ensure that the power supply to the circuit where the sensor will be installed is completely disconnected.
- Lleoliad Mowntio: Choose a suitable location for the sensor. It should be placed where it can effectively detect motion in the desired area, away from direct heat sources, air conditioning vents, or direct sunlight. The module has mounting holes for secure attachment.
- Gwifrau: Connect the sensor module according to the wiring diagram below. The module has clearly labeled INPUT (12V/24V) and OUTPUT (12V/24V) terminals.
- Connect the positive (+) and negative (-) terminals of your DC 12V/24V power supply to the MEWNBWN terminals of the sensor module.
- Connect the positive (+) and negative (-) terminals of your LED light or LED strip to the ALLBWN terminals of the sensor module.
- Cysylltiadau Diogel: Gwnewch yn siŵr bod yr holl gysylltiadau gwifren yn ddiogel ac wedi'u hinswleiddio'n iawn i atal cylchedau byr.
- Pŵer Ymlaen: Once all connections are verified, restore power to the circuit.
Ffigur 3: Uchaf view of the PIR-8 module, highlighting input and output terminals for wiring.
6. Cyfarwyddiadau Gweithredu
The Akozon PIR-8 Motion Sensor Switch Module operates automatically once installed and powered. The primary adjustable setting is the delay time.
6.1. Delay Time Adjustment
The module features an adjustable knob on its underside to set the duration the light remains on after motion is detected and then ceases. The delay time can be set from 1 to 10 minutes.
- Locate the small knob on the bottom of the sensor module.
- Use a small screwdriver to gently turn the knob to your desired delay setting. Turning clockwise increases the delay time, while turning counter-clockwise decreases it.
- Test the setting by triggering the sensor and observing how long the light stays on.
Figure 4: Underside of the PIR-8 module with the adjustable delay time knob (1-10 minutes).
6.2. Gweithrediad Awtomatig
When the sensor detects human body infrared motion within its detection range (up to 8 meters and 60 degrees angle), the connected lights will turn on. The lights will remain on for the set delay time. If motion is continuously detected, the delay timer will reset, and the lights will stay on until no motion is detected for the entire delay period.
7. cynnal
The Akozon PIR-8 Motion Sensor Switch Module requires minimal maintenance. To ensure optimal performance and longevity:
- Glanhau: Periodically wipe the sensor lens with a soft, dry cloth to remove dust or debris that might obstruct detection. Do not use abrasive cleaners or solvents.
- Gwiriad Cysylltiad: Occasionally inspect the wiring connections to ensure they remain secure and free from corrosion.
- Ffactorau Amgylcheddol: Sicrhewch fod yr amgylchedd gweithredu yn aros o fewn yr ystodau tymheredd a lleithder penodedig.
8. Datrys Problemau
If you encounter issues with your PIR-8 Motion Sensor Switch Module, refer to the following table:
| Problem | Achos Posibl | Ateb |
|---|---|---|
| Lights do not turn on when motion is detected. |
|
|
| Mae goleuadau'n aros ymlaen yn barhaus. |
|
|
| Mae goleuadau'n fflachio neu'n ymddwyn yn afreolaidd. |
|
|
9. Gwarant a Chefnogaeth
Specific warranty information for the Akozon PIR-8 Motion Sensor Switch Module is not provided in this document. For warranty claims or technical support, please refer to the retailer or manufacturer's official website where the product was purchased. Please have your purchase receipt and product model number (PIR-8, Akozon91d3y42bap) available when contacting support.
