BEETECH B-M2 Moisture Meter User Manual

Rhagymadrodd

The BEETECH B-M2 Moisture Meter is a professional instrument designed for accurately checking moisture content in various materials. It is suitable for wood, timber, paper, cardboard, and hardened building materials such as plaster, concrete, and mortar. This device operates on the principle of electrical impedance and utilizes advanced single-chip micro-computer technology to provide precise measurements by integrating characteristics of different materials for accurate calculation. It offers a non-destructive measuring method, ensuring the integrity of the measured object. The B-M2 features both an analog bar display and a digital display for clear readings, and its electrode pins are replaceable. This manual provides essential information for the proper setup, operation, and maintenance of your BEETECH B-M2 Moisture Meter.

Beth Sydd yn y Bocs

Upon unpacking your BEETECH B-M2 Moisture Meter, please ensure all the following components are present:

• BEETECH B-M2 Moisture Meter
• Cwdyn Amddiffynnol
• Llawlyfr Defnyddiwr (y ddogfen hon)
• Batri (9V)

Image: Contents of the BEETECH B-M2 Moisture Meter package, including the meter, manual, and battery.

Nodweddion Cynnyrch

• Replaceable Electrodes: The meter features replaceable electrode pins (10mm length). Note: Electrodes are not included and must be purchased separately when replacement is needed.
• Arddangosfa Ddeuol: Simultaneous analog bar display and digital display for clear and comprehensive readings.
• Dewis Deunydd: Selectable measurement modes for Wood and other building materials.
• Swyddogaethau Uwch: Includes Maximum (MAX) and Minimum (MIN) reading retention, Auto Power Off, and an LCD display with backlight for visibility in various lighting conditions.
• Mesur Tymheredd: Simultaneous measurement of moisture and ambient temperature.

Gosod

Gosod Batri

1. Locate the battery compartment cover on the back of the BEETECH B-M2 Moisture Meter.
2. Llithrwch glawr adran y batri i lawr i'w agor.

Image: Hands opening the battery compartment cover on the back of the meter.
3. Connect the included 9V battery to the battery connector inside the compartment, ensuring correct polarity.


Image: Hands connecting and inserting a 9V battery into the meter's battery compartment.

4. Carefully place the battery into the compartment and slide the cover back into place until it clicks securely.

Cyfarwyddiadau Gweithredu

Dyfais Drosoddview

Delwedd: Blaen view of the BEETECH B-M2 Moisture Meter, showing the LCD screen displaying moisture percentage and temperature, along with power, backlight, mode, and MAX/MIN buttons.

Pweru Ymlaen/Diffodd

• Gwasgwch y Botwm pŵer (U-shaped arrow icon) to turn the meter on.
• Bydd y mesurydd yn diffodd yn awtomatig ar ôl cyfnod o anweithgarwch er mwyn arbed bywyd batri.

Selecting Material Mode

• Gwasgwch y MODE botwm to cycle through the available material types: Wood and Building Materials.
• The selected mode will be indicated on the LCD display. Ensure the correct mode is chosen for accurate measurements.

Cymryd Mesur

1. After selecting the appropriate material mode, firmly press the electrode pins into the material you wish to measure. Ensure good contact.
2. The moisture content will be displayed digitally as a percentage (%) and also indicated on the analog bar graph.
3. The ambient temperature will also be displayed simultaneously.

Image: A hand holding the BEETECH B-M2 Moisture Meter, showing a moisture reading of 15.4% on the LCD display.

Using MAX/MIN Function

• Gwasgwch y Botwm MAX / MIN i view the maximum or minimum moisture reading recorded during a measurement session.
• Press again to cycle between MAX, MIN, and current reading.

Rheoli Backlight

• Gwasgwch y Botwm golau ôl (light bulb icon) to turn the LCD backlight on or off, improving visibility in low-light conditions.

Cynnal a chadw

Amnewid electrod

The electrode pins are replaceable. If the pins become dull, bent, or damaged, they should be replaced to ensure accurate readings. Replacement electrodes (10mm length) are not included with the meter and must be purchased separately from authorized BEETECH dealers.

Glanhau a Storio

• Wipe the meter with a soft, dry cloth after each use. Do not use abrasive cleaners or solvents.
• Store the meter in its protective pouch in a cool, dry place away from direct sunlight and extreme temperatures.
• If the meter will not be used for an extended period, remove the battery to prevent leakage.

Datrys problemau

If you encounter issues with your BEETECH B-M2 Moisture Meter, please refer to the following common troubleshooting steps:

• Dim Arddangosfa/Mesurydd Ddim yn Troi Ymlaen:
  • Check if the battery is correctly installed with proper polarity.
  • Replace the 9V battery with a new one.
• Darlleniadau Anghywir:
  • Ensure the electrode pins are making firm and complete contact with the material.
  • Verify that the correct material mode (Wood or Building Materials) is selected.
  • Check if the electrode pins are damaged or dull; replace if necessary.
  • Ensure the material surface is clean and free from contaminants.
• Mae'r arddangosfa'n pylu:
  • Press the backlight button to activate the backlight.
  • Replace the battery if the display remains dim even with the backlight on.

If the problem persists after attempting these steps, please contact BEETECH customer support for further assistance.

Manylebau

Gwarant a Chefnogaeth

For warranty information, technical support, or service inquiries regarding your BEETECH B-M2 Moisture Meter, please refer to the warranty card included with your product or contact BEETECH customer service directly. Contact details can typically be found on the manufacturer's official websafle neu ar becynnu'r cynnyrch.