RME Fireface 802 FS USB Audio Interface User Manual

1. Rhagymadrodd

This manual provides detailed instructions for the installation, operation, and maintenance of your RME Fireface 802 FS USB Audio Interface. The Fireface 802 FS is a professional 30-input/30-output audio interface designed for high-quality audio recording, mixing, and mastering applications. It features reference-class AD/DA conversion, RME's SteadyClock FS jitter suppression, and extensive connectivity options.

Please read this manual thoroughly before operating the device to ensure proper usage and to maximize its performance and longevity.

2. Cyfarwyddiadau Diogelwch

• Cyflenwad Pŵer: Defnyddiwch yr addasydd pŵer a gyflenwir gyda'r uned yn unig. Sicrhewch fod y cyfainttage yn cyfateb i'ch cyflenwad pŵer lleol.
• Awyru: Peidiwch â rhwystro agoriadau awyru. Sicrhewch fod digon o lif aer o amgylch yr uned i atal gorboethi.
• Lleithder: Do not expose the unit to rain, moisture, or liquids. Avoid placing objects filled with liquids on the unit.
• Glanhau: Disconnect power before cleaning. Use a dry, soft cloth. Do not use liquid or aerosol cleaners.
• Gwasanaethu: Peidiwch â cheisio cynnal a chadw'r uned hon eich hun. Cyfeiriwch yr holl waith cynnal a chadw at bersonél gwasanaeth cymwys.
• Lleoliad: Rhowch yr uned ar arwyneb sefydlog, gwastad. Osgowch ei gosod ger ffynonellau gwres neu mewn golau haul uniongyrchol.

3. Cynnwys Pecyn

Gwiriwch fod eich pecyn yn cynnwys yr eitemau canlynol:

• RME Fireface 802 FS USB Audio Interface
• Cebl USB
• Uned Cyflenwi Pŵer
• Printed Quick Start Guide (refer to RME website for full manual)

If any items are missing or damaged, please contact your dealer or RME support immediately.

4. Gosod

4.1 Panel Blaen Drosview

The front panel of the Fireface 802 FS provides access to four microphone/line preamps, headphone outputs, and status indicators. Understanding these controls is essential for proper operation.

Ffigur 1: Front panel of the RME Fireface 802 FS. It features four combination XLR/TRS inputs (Mic/Line 9-12) with individual gain controls, signal (SIG) and 48V/Instrument (48V/INST) indicators. On the right, there are two headphone/line monitor outputs (Ch. 9/10 and Ch. 11/12) with a shared volume knob. The blue section displays RME Fireface 802 FS branding, various state indicators for ADAT, MIDI, WC, AES, CC, USB, and a power switch.

4.2 Gosod Gyrwyr

Before connecting the Fireface 802 FS to your computer, download and install the latest drivers from the official RME website. Drivers are available for macOS, Windows, and Linux operating systems. Follow the on-screen instructions during installation.

• Ymwelwch â'r RME Downloads page.
• Select your operating system and the Fireface 802 FS model.
• Dadlwythwch a rhedeg y gosodwr.
• Ailgychwyn eich cyfrifiadur os gofynnir i chi.

4.3 Cysylltiad Caledwedd

1. Pwer: Connect the supplied power adapter to the "DC IN" port on the rear panel and plug it into a power outlet.
2. USB: Connect the Fireface 802 FS to your computer using the provided USB cable. Use a high-quality USB 2.0 port for optimal performance.
3. Mewnbynnau Sain:
   • Mic/Line Inputs (Front Panel): Connect microphones or line-level instruments to the combination XLR/TRS jacks (9-12).
   • Analog Line Inputs (Rear Panel): Connect line-level sources to the dedicated analog inputs.
   • Mewnbynnau Digidol: Connect ADAT, S/PDIF, or AES/EBU devices to the respective digital input ports.
4. Allbynnau Sain:
   • Headphone Outputs (Front Panel): Connect headphones to the 1/4" jacks (Ch. 9/10, Ch. 11/12).
   • Analog Line Outputs (Rear Panel): Connect studio monitors or other line-level devices.
   • Allbynnau Digidol: Connect ADAT, S/PDIF, or AES/EBU devices.
5. MIDI: Connect MIDI devices to the MIDI In/Out ports.
6. Cloc geiriau: Connect external word clock devices to the Word Clock I/O for synchronization.

4.4 Software Setup (TotalMix FX)

The Fireface 802 FS integrates with RME's TotalMix FX software, which provides comprehensive routing, mixing, and DSP effects capabilities. After driver installation, TotalMix FX should launch automatically or can be found in your applications folder.

• Familiarize yourself with the TotalMix FX interface for routing inputs to outputs, creating submixes, and applying effects.
• Refer to the dedicated TotalMix FX manual for in-depth instructions on its features.

5. Cyfarwyddiadau Gweithredu

5.1 Pweru Ymlaen/Diffodd

To power on the unit, press the "POWER" switch on the front panel. The status LEDs will illuminate. To power off, press the "POWER" switch again.

5.2 Input Gain Adjustment

For Mic/Line inputs 9-12 on the front panel, use the corresponding "GAIN" knobs to adjust the input level. The "SIG" LED indicates signal presence, while the "48V/INST" LED indicates phantom power or instrument mode activation.

• Meicroffonau: For condenser microphones, activate 48V phantom power by pressing the "48V/INST" button. Adjust gain until the "SIG" LED flashes green during the loudest parts, avoiding red clipping.
• Offerynnau: For high-impedance instruments (e.g., guitar, bass), press the "48V/INST" button to engage instrument mode. Adjust gain similarly.

5.3 Monitro

The front panel features two headphone/line monitor outputs (Ch. 9/10 and Ch. 11/12). Use the "VOL" knob to adjust the output level for these channels. Routing to these outputs is configured within TotalMix FX.

5.4 Effeithiau DSP

The Fireface 802 FS includes built-in DSP effects accessible via TotalMix FX. These effects operate independently of your computer's CPU, providing low-latency processing. Consult the TotalMix FX manual for details on using EQ, Dynamics, Reverb, and Echo.

5.5 Class-Compliant Mode

The Fireface 802 FS supports class-compliant operation, allowing direct connection to iOS devices (iPad) without requiring specific drivers. This mode enables basic audio I/O functionality. Refer to the RME website for instructions on activating and using class-compliant mode.

5.6 TotalMix Remote

Control your Fireface 802 FS remotely using TotalMix Remote on an iPad or another computer. This requires a network connection and the TotalMix Remote application. Detailed setup instructions are available on the RME websafle.

6. cynnal

• Glanhau: Keep the unit clean by wiping it with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Awyru: Ensure that the ventilation slots are free from dust and obstructions.
• Storio: Pan nad yw'n cael ei ddefnyddio am gyfnodau hir, storiwch yr uned mewn amgylchedd sych, di-lwch.
• Diweddariadau Cadarnwedd: Regularly check the RME websafle ar gyfer diweddariadau cadarnwedd i sicrhau perfformiad gorau posibl a mynediad at nodweddion newydd.

7. Datrys Problemau

For further troubleshooting, consult the comprehensive RME Fireface 802 FS manual available on the RME website or contact RME support.

8. manylebau

9. Gwybodaeth Gwarant

RME products are covered by a limited manufacturer's warranty. The specific terms and duration of the warranty may vary by region and product. Please retain your proof of purchase. For detailed warranty information, including coverage and how to make a claim, please visit the official RME website or contact your local RME distributor.

Note: Unauthorized repairs or modifications will void the product warranty.

10. Cefnogaeth

For technical assistance, driver updates, firmware updates, or additional documentation, please visit the official RME websafle:

www.rme-audio.de

You may also contact RME customer support directly through the contact information provided on their websafle.