Llawlyfr Cyfarwyddiadau Cabinet Is-woofer DJ PA Pweredig Gweithredol PRORECK SP-218X

1. Rhagymadrodd

This manual provides essential information for the safe and efficient operation of your PRORECK SP-218X Active Powered PA DJ Subwoofer Cabinet. Please read this manual thoroughly before using the product to ensure proper setup, operation, and maintenance. Keep this manual for future reference.

The PRORECK SP-218X is a powerful active subwoofer designed for sound reinforcement, featuring dual 18-inch woofers, a Class-D amplifier, and multiple DSP presets for various applications.

2. Gwybodaeth Diogelwch

Dilynwch ragofalon diogelwch sylfaenol bob amser wrth ddefnyddio'r cynnyrch hwn i leihau'r risg o dân, sioc drydanol ac anaf.

• Ffynhonnell Pwer: Connect the unit only to a 115V~60Hz power supply. Ensure the power cord is not damaged or pinched.
• Awyru: Peidiwch â rhwystro agoriadau awyru. Sicrhewch fod digon o lif aer o amgylch yr uned i atal gorboethi.
• Lleithder: Do not expose the unit to rain or moisture. Do not place objects filled with liquids, such as vases, on the unit. This product is not waterproof.
• Lleoliad: Rhowch yr uned ar arwyneb sefydlog, gwastad. Osgowch ei gosod ger ffynonellau gwres neu mewn golau haul uniongyrchol.
• Gwasanaethu: Peidiwch â cheisio gwasanaethu'r cynnyrch hwn eich hun. Cyfeiriwch yr holl wasanaethu at bersonél gwasanaeth cymwys.
• Trin: The unit is heavy (159.2 lbs). Use caution and proper lifting techniques when moving it. Utilize the side handles for transport.

3. Cynnwys Pecyn

Gwiriwch fod yr holl eitemau yn bresennol yn y pecyn:

• 1 x PRORECK SP-218X Active Powered PA DJ Subwoofer Cabinet
• 2 x 18-inch Woofers (integrated within the cabinet)
• Cebl Pŵer
• Llawlyfr Defnyddiwr (y ddogfen hon)

4. Nodweddion Cynnyrch

• Perfformiad pwerus: 1000 Watts RMS / 5000 Watts Peak power output.
• Dual 18-inch Woofers: Equipped with 80oz magnets and 3-inch voice coils for deep bass reinforcement.
• Dosbarth-D Ampllewywr: Efficient built-in amplification for clear and powerful sound.
• Rhagosodiadau DSP: Features 3 Digital Signal Processing presets for optimized sound in various scenarios.
• Cysylltedd XLR: XLR input and output jacks for easy connection to mixers or other ampcodwyr.
• Trawsnewid electronig: Adjustable crossover from 35Hz to 120Hz.
• Allbwn Tocyn Uchel XLR: Filtered output from 120Hz to 20KHz for connecting full-range speakers.
• Phase Selection: Button to select phase from normal to 180° for optimal multi-subwoofer setups.
• Adeiladu Gwydn: Super solid housing made of plywood to reduce resonance and improve sound quality.
• Cludadwyedd: Two side handles for easier transport.

5. Rheolaethau a Chysylltiadau

Disgrifiad o'r Delwedd:

This image displays the rear control panel of the PRORECK SP-218X subwoofer, highlighting various inputs, outputs, and controls. Numbered labels correspond to the descriptions below.

1. XLR Output (FULL RANGE): Parallel balanced stereo XLR output. Delivers an exact copy of the input signal.
2. Mewnbwn XLR: Mewnbwn XLR cytbwys ar gyfer cysylltu signalau o gymysgwyr neu eraill ampcodwyr.
3. Cyfrol: Knob to increase or decrease the volume control level.
4. Cyfnod: Phase selection button (NORMAL - REV180°).
5. Cyfyngiad: LED indicator. Illuminates when the input signal is too high, which may distort the output sound or damage the unit.
6. Dangosydd Pŵer: Dangosydd pŵer LED.
7. XLR Output (HIGH PASS): Allbwn XLR cytbwys wedi'i hidlo (pas uchel o 120Hz).
8. Newid ON / OFF: Main power switch to turn the unit on and off.
9. Mewnbwn Voltage: Power input for 115V~60Hz.

Disgrifiad o'r Delwedd: This image highlights the design features of the subwoofer, including the rubber foot pads on the sides that allow the subwoofer to stand upright, the connection detail for easy assembly and movement, and the lifting handles for convenience.

6. Gosod

1. Lleoliad: Position the subwoofer on a stable, level surface. Consider room acoustics and desired bass response when choosing a location. Ensure adequate space for ventilation.
2. Cysylltiad Pwer: Ensure the ON/OFF switch (8) is in the OFF position. Connect the power cable to the Input Voltage (9) receptacle on the rear panel and then to a grounded 115V~60Hz AC outlet.
3. Cysylltiad Mewnbwn Sain:
   • Connect your mixer or audio source to the XLR Input (2) using a balanced XLR cable.
   • If connecting additional full-range speakers, use the XLR Output (HIGH PASS) (7) to send a filtered signal (120Hz and above) to those speakers. For a full-range signal to another subwoofer or device, use the XLR Output (FULL RANGE) (1).
4. Gosodiad Cyfaint Cychwynnol: Turn the Volume knob (3) to its minimum setting before powering on.

7. Cyfarwyddiadau Gweithredu

1. Pŵer Ymlaen: Flip the ON/OFF Switch (8) to the ON position. The Power Indicator (6) LED should illuminate.
2. Addasu Cyfrol: Slowly increase the Volume knob (3) to the desired listening level. Monitor the Limit LED (5). If it illuminates frequently or stays lit, reduce the input signal level from your source or decrease the subwoofer's volume to prevent distortion and potential damage.
3. Addasiad Cyfnod: If using multiple subwoofers or integrating with other speakers, adjust the Phase button (4) (NORMAL or REV180°) to achieve the best bass response and alignment with other audio components. Experiment with both settings to find the optimal sound.
4. Rhagosodiadau DSP: The SP-218X includes 3 DSP presets. Refer to the specific DSP control panel (if present, not detailed in provided images) for instructions on how to select and utilize these presets to optimize sound for different environments or music types.
5. Pwer i ffwrdd: Before disconnecting power or making changes to connections, turn the Volume knob (3) to minimum and then flip the ON/OFF Switch (8) to the OFF position.

8. cynnal

• Glanhau: Use a soft, dry cloth to clean the exterior of the subwoofer. Do not use abrasive cleaners, waxes, or solvents.
• Awyru: Gwiriwch yn rheolaidd fod yr agoriadau awyru yn glir o lwch a malurion.
• Storio: If storing the unit for an extended period, ensure it is in a dry, cool environment, protected from dust and extreme temperatures.
• Arolygiad: Periodically inspect the power cord and all cables for any signs of damage.

9. Datrys Problemau

10. manylebau

Disgrifiad o'r Delwedd: This image provides the key dimensions of the PRORECK SP-218X subwoofer, showing a width of 43.9 inches, a height of 22.4 inches, and a depth of 23.6 inches.

11. Gwarant a Chefnogaeth

Gwarant: This PRORECK SP-218X subwoofer comes with a 1-year free limited warranty from the date of purchase. Please retain your proof of purchase for warranty claims.

Cefnogaeth i Gwsmeriaid: For technical assistance, troubleshooting, or warranty inquiries, please contact PRORECK AUDIO customer support. Refer to the contact information provided with your purchase or visit the official PRORECK websafle.

Adnoddau Ar-lein: Am wybodaeth a chymorth ychwanegol, gallwch ymweld â'r Siop PRORECK ar Amazon.

12. Cynnyrch Drosview

Disgrifiad o'r Delwedd: Mae blaen view of the PRORECK SP-218X subwoofer, accompanied by a list of its main specifications: 1000 Watts RMS/5000 peak, XLR output/input, Electronic Crossover (35-120 Hz), XLR High Pass Output (120Hz-20KHz), and 3" Voice Coil.

Disgrifiad o'r Delwedd: The PRORECK SP-218X subwoofer positioned in a dynamic live event environment, with a crowd of people dancing and stage lighting in the background, illustrating its intended use.

Disgrifiad o'r Delwedd: Sioe collageasing diverse applications for the PRORECK SP-218X subwoofer, including a live concert, a business meeting, an outdoor musical performance, and a fitness class, demonstrating its versatility.