YuanLey 8 Port 2.5G Unmanaged Desktop Ethernet Switch with 10G SFP User Manual

1. Rhagymadrodd

This manual provides detailed instructions for the installation, operation, and maintenance of your YuanLey 8 Port 2.5G Unmanaged Desktop Ethernet Switch with 10G SFP. Please read this manual thoroughly before using the device to ensure proper functionality and to prevent damage.

2. Cynnwys Pecyn

Gwiriwch fod eich pecyn yn cynnwys yr eitemau canlynol:

• 1 x YuanLey 8 Port 2.5G Ethernet Switch
• 1 x Power Cord
• 1 x Llawlyfr Defnyddiwr

3. Nodweddion Cynnyrch

• 9 Port Configuration: Includes 8 x 2.5 Gigabit Ethernet ports and 1 x 10G SFP+ Port.
• Perfformiad Cyflymder Uchel: Delivers 2.5 times faster network performance than traditional Gigabit switches, with a switching capacity of up to 60Gbps.
• Plygiwch a Chwarae: Unmanaged design requires no configuration for immediate use.
• Durable and Quiet: Features a metal case with 6KV lightning protection and a fanless design for silent operation.
• Tymheredd Gweithredu Eang: Yn gweithredu'n ddibynadwy mewn tymereddau sy'n amrywio o -10°C i 50°C.
• Lleoliad Amlbwrpas: Supports both wall mount and desktop placement.

4. Cynnyrch Drosview

Figure 4.1: YuanLey 8 Port 2.5G Unmanaged Desktop Ethernet Switch

Ffigur 4.2: Panel Blaen Drosoddview with Ports and Indicators

The switch features 8 RJ45 ports supporting 10/100/1000Mbps/2.5G adaptive speeds and 1 SFP+ port for 1G/2.5G/10G fiber connections. LED indicators provide status for power and link activity.

Ffigur 4.3: Panel Cefn Drosoddview with Power Input

Ffigur 4.4: Manwl View of Ports and Indicators

The rear panel includes the DC 12V/1.0A power input port and a grounding screw for electrical safety. The front panel LEDs indicate power status, 2.5Gbps link speed (orange), and 100/1000Mbps link speed (green) for RJ45 ports, and link status for the SFP+ port.

5. Gosod

Follow these steps to set up your YuanLey Ethernet Switch:

1. Pwer Cysylltu: Plug the provided power adapter into the DC 12V/1.0A input port on the rear of the switch, then plug the adapter into a power outlet. The PWR LED on the front panel will illuminate green.
2. Cysylltu Dyfeisiau Ethernet: Connect your network devices (e.g., computers, NAS, WiFi 6 APs, gaming PCs) to the 2.5G Base-T ports (1-8) using standard Ethernet cables (Cat5e or higher recommended for 2.5G speeds). The corresponding port LEDs will light up to indicate a successful connection and speed.
3. Connect SFP+ Module (Optional): If using the 10G SFP+ port, insert a compatible 1G/2.5G/10G SFP/SFP+ module (not included) into the SFP+ slot. Then, connect a fiber optic cable or DAC cable to the module. The SFP indicator LED will light up when a link is established.

Figure 5.1: Typical Network Setup with the YuanLey Switch

6. Gweithredu'r Switsh

The YuanLey 2.5G Unmanaged Ethernet Switch is designed for simple plug-and-play operation. Once powered on and connected to your network devices, it will automatically detect the link speed and establish connections without any further configuration.

• Dangosyddion LED: Observe the PWR, L1-L8, and SFP+ Link LEDs to monitor the switch's status and network activity.
• MDI/MDIX Awtomatig: The switch supports Auto MDI/MDIX, eliminating the need for crossover cables.
• Adaptive Speed: RJ45 ports automatically adapt to 10/100/1000Mbps or 2.5Gbps.

7. cynnal

To ensure optimal performance and longevity of your switch, consider the following maintenance guidelines:

• Lleoliad: Place the switch in a well-ventilated area, away from direct sunlight, heat sources, and excessive moisture. The fanless design relies on natural convection for cooling.
• Glanhau: Glanhewch du allan y switsh o bryd i'w gilydd gyda lliain meddal, sych. Osgowch ddefnyddio glanhawyr hylif neu aerosol.
• Rheoli Ceblau: Gwnewch yn siŵr bod ceblau rhwydwaith wedi'u trefnu'n daclus a heb fod wedi'u plygu na'u straenio'n ormodol.
• Cyflenwad Pŵer: Use only the original power adapter provided with the switch.

Figure 7.1: Fanless Design and Environmental Considerations

8. Datrys Problemau

Os byddwch chi'n dod ar draws problemau gyda'ch switsh, cyfeiriwch at y problemau a'r atebion cyffredin canlynol:

• Dim pŵer:
  • Gwnewch yn siŵr bod yr addasydd pŵer wedi'i gysylltu'n ddiogel â'r switsh ac allfa bŵer sy'n gweithio.
  • Check if the PWR LED is illuminated. If not, try a different power outlet.
• Dim Cyswllt/Gweithgaredd ar Borthladd:
  • Gwiriwch fod y cebl Ethernet wedi'i gysylltu'n ddiogel â phorthladd y switsh a'r ddyfais rhwydwaith.
  • Rhowch gynnig ar gebl Ethernet gwahanol.
  • Sicrhewch fod y ddyfais gysylltiedig wedi'i phweru ymlaen ac yn gweithredu'n gywir.
  • Check the LED indicator for the specific port. If it's off, there might be no link.
• Cyflymder Rhwydwaith Araf:
  • Ensure all devices in the network path (NICs, cables, routers) support 2.5G speeds to achieve maximum performance.
  • Use Cat5e or higher-rated Ethernet cables for 2.5G connections.
  • Check the color of the port LED: Orange indicates 2.5Gbps, Green indicates 100/1000Mbps.
• SFP+ Port Issues:
  • Ensure the SFP/SFP+ module is correctly inserted and compatible with the switch.
  • Verify the fiber optic or DAC cable is properly connected and undamaged.
  • Check the SFP indicator LED for link status.

9. manylebau

Ffigur 9.1: Dimensiynau'r Cynnyrch

10. Gwarant a Chefnogaeth

YuanLey products are designed for reliability and performance. For warranty information and technical support, please refer to the official YuanLey websafle neu cysylltwch â'u gwasanaeth cwsmeriaid yn uniongyrchol. Cadwch eich derbynneb prynu ar gyfer hawliadau gwarant.

Am gymorth pellach, gallwch ymweld â'r YuanLey Store on Amazon.