D-Link DMS-108 8-Port 2.5GB Unmanaged Multi-Gigabit Switch User Manual

Rhagymadrodd

The D-Link DMS-108 is an 8-Port 2.5GB Unmanaged Multi-Gigabit Switch designed to enhance network performance for devices requiring high-speed data transfer. This switch is ideal for connecting 2.5G NAS, 2.5G PCIe Adapters, 2.5G Servers, gaming PCs, and Wi-Fi 6 Access Points with 2.5G WAN ports. It features a durable metal housing, fanless design for silent operation, and supports energy-efficient Ethernet (EEE) to reduce power consumption.

This manual provides instructions for setting up, operating, maintaining, and troubleshooting your DMS-108 switch.

Delwedd: Blaen view of the D-Link DMS-108 switch, showing 8 Ethernet ports and LED indicators.

Cynnwys Pecyn

Gwiriwch fod eich pecyn yn cynnwys yr eitemau canlynol:

• Switsh Aml-Gigabit Heb ei Reoli D-Link DMS-108 8-Porthladd 2.5GB
• Addasydd Pŵer
• Canllaw Gosod Cyflym (QIG)

Os oes unrhyw eitemau ar goll neu wedi'u difrodi, cysylltwch â'ch ailwerthwr D-Link lleol i gael cymorth.

Gosod

Gosod Corfforol

The DMS-108 switch can be placed on a desktop or mounted on a wall. Ensure the installation location provides adequate ventilation and is free from excessive heat, humidity, or electromagnetic interference.

Cysylltu'r Swits

1. Cysylltiad Pwer: Connect the provided power adapter to the power input port on the rear panel of the DMS-108 switch. Plug the other end of the power adapter into a standard electrical outlet. The power LED on the front panel will illuminate.

   Image: Rear panel of the DMS-108, highlighting the power input (12V===1A), ground screw (SWITCH GND), and Kensington lock slot.

2. Cysylltiad Dyfais Rhwydwaith: Connect your network devices (e.g., computers, NAS, Wi-Fi 6 APs, gaming consoles) to any of the 8 available 2.5 Gigabit Ethernet ports using standard Ethernet cables (Cat5e or Cat6 recommended for optimal performance).

   Image: The D-Link DMS-108 switch demonstrating compatibility with existing Cat5e and Cat6 cables for 2.5x faster transfer rates.

The DMS-108 is a plug-and-play device, requiring no software installation or configuration. It will automatically detect the link speeds of connected devices (100Mb/1G/2.5G) and adjust for optimal performance.

Gweithredu'r switsh

Dangosyddion LED

The front panel of the DMS-108 features LED indicators for each port and for power status. These LEDs provide visual feedback on the switch's operation:

• Pwer LED: Indicates if the switch is powered on.
• LEDs Cysylltu/Gweithredu (fesul porthladd):
  • Solid Green: Indicates a stable 2.5G network link.
  • Solid Blue: Indicates a stable 1G network link.
  • Solid Amber: Indicates a stable 100Mb network link.
  • Flashing: Indicates network activity (data transmission).
  • I ffwrdd: Dim cyswllt na dyfais wedi'i gysylltu.

Delwedd: Manwl view of the DMS-108's front panel, highlighting the Link/Act LEDs for each of the 8 ports.

Nodweddion Allweddol

• Awto-negodi: Automatically senses the link speeds of connected devices (100Mb/1G/2.5G) and adjusts for compatibility and optimal performance.
• Ansawdd y Gwasanaeth (QoS): Allows network traffic to be classified into 8 priority levels, ensuring critical data (e.g., gaming, video streaming) receives preferential treatment.
• Rheoli llif: Helps minimize dropped packets during periods of high network congestion, leading to more reliable connections.
• IGMP Snooping: Optimizes multicast data streams, which is beneficial for bandwidth-intensive applications like IPTV, by forwarding multicast traffic only to ports that have requested it.
• Energy-Efficient Ethernet (EEE) (IEEE 802.3az): Reduces power consumption during periods of low network activity, conserving energy and lowering operational costs.

Image: An illustration demonstrating how the DMS-108 switch can upgrade a network to ultra-fast multi-gigabit speeds by connecting various devices.

Image: The DMS-108 switch highlighting its durable metal casing, silent fanless design, energy-efficient features, and D-Link's 35+ years of experience.

Cynnal a chadw

To ensure optimal performance and longevity of your D-Link DMS-108 switch, follow these maintenance guidelines:

• Awyru: Ensure the switch is placed in a location with adequate airflow. Do not block the ventilation holes on the sides of the device.
• Glanhau: Periodically clean the exterior of the switch with a soft, dry cloth. Avoid using liquid or aerosol cleaners, as they may damage the device.
• Rheoli Ceblau: Cadwch geblau rhwydwaith wedi'u trefnu ac yn rhydd o blygiadau neu blygiadau gormodol i atal dirywiad y signal.
• Cyflenwad Pŵer: Use only the power adapter provided with the switch. If the power adapter is damaged, contact D-Link support for a replacement.
• Diweddariadau Cadarnwedd: As an unmanaged switch, the DMS-108 typically does not require firmware updates. However, always refer to the D-Link support website for any specific recommendations.

Datrys problemau

If you encounter issues with your DMS-108 switch, refer to the following troubleshooting tips:

• Dim pŵer:
  • Check if the power adapter is securely connected to the switch and the electrical outlet.
  • Verify that the electrical outlet is functioning correctly by plugging in another device.
  • Ensure the power LED on the switch is illuminated.
• Dim Cyswllt ar Borthladd:
  • Ensure the Ethernet cable is securely connected to both the switch port and the connected device.
  • Verify that the connected device is powered on and its network adapter is enabled.
  • Rhowch gynnig ar gebl Ethernet gwahanol i ddiystyru cebl diffygiol.
  • Profwch gyda phorthladd gwahanol ar y switsh.
  • Check the Link/Act LED for the specific port. If it's off, there's no active connection.
• Cyflymder Rhwydwaith Araf:
  • Ensure you are using Cat5e or Cat6 Ethernet cables for 2.5G connections. Older cables (e.g., Cat5) may limit speed.
  • Verify that your connected devices support 2.5G Ethernet. The switch will operate at the highest common speed.
  • Check the Link/Act LED color for the port to confirm the negotiated speed (Green for 2.5G, Blue for 1G, Amber for 100Mb).
  • Reduce network congestion by limiting simultaneous bandwidth-intensive activities.
• Cysylltiad ysbeidiol:
  • Gwiriwch yr holl gysylltiadau cebl am ryddid neu ddifrod.
  • Ensure the switch is not overheating. Provide adequate ventilation.
  • Osgowch osod y switsh ger ffynonellau ymyrraeth electromagnetig cryf.

If problems persist, contact D-Link Technical Support for further assistance.

Manylebau

Gwybodaeth Gwarant

The D-Link DMS-108 switch comes with a Limited Warranty. For detailed information regarding the terms and conditions of your warranty, please refer to the official D-Link websafle neu'r cerdyn gwarant sydd wedi'i gynnwys gyda'ch cynnyrch.

Optional protection plans may be available for purchase, offering extended coverage beyond the standard manufacturer's warranty. Please check with your retailer for details on available protection plans.

Cefnogaeth

For technical support, product registration, or to download the latest documentation and software, please visit the official D-Link support websafle:

www.dlink.com/support

You can also find additional resources and frequently asked questions on the D-Link websafle.

Fideo Cynnyrch

Watch the official D-Link video for an overview of D-Link Switch Solutions for various environments.