DEWALT ToughSeries 25ft Illuminated Tape Measure (DWHT35625S)

Rhagymadrodd

The DEWALT ToughSeries 25ft Illuminated Tape Measure (Model DWHT35625S) is engineered for durability and enhanced visibility in demanding work environments. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your tape measure.

Ffigur 1: Blaen view of the DEWALT ToughSeries 25ft Illuminated Tape Measure.

Gosod

Codi Tâl Cychwynnol

Before first use, fully charge the integrated LED battery. The tape measure includes a USB charging cable for convenience.

• Locate the USB charging port on the side of the tape measure.
• Connect the provided USB cable to the tape measure and a compatible USB power source (e.g., wall adapter, computer USB port).
• Bydd y golau dangosydd gwefru yn goleuo yn ystod gwefru.
• Allow approximately 3 hours for a full charge. A full charge provides up to 3 hours of continuous LED runtime.

Figure 2: The DEWALT ToughSeries tape measure showing the included USB charging cable.

Figure 3: The tape measure connected to a power source for charging.

Cyfarwyddiadau Gweithredu

Ymestyn a Thynnu'r Llafn yn Ôl

• To extend the blade, pull the end hook away from the case.
• To retract the blade, release the end hook and allow the blade to smoothly return into the case. Guide the blade to prevent rapid retraction.

Using the Slide Lock

• To lock the blade at a desired measurement, push the slide lock button forward.
• To release the lock, pull the slide lock button backward.

Activating the LED Light

The integrated LED light illuminates the measurement area for improved visibility in low-light conditions.

• Press the LED power button (typically located near the blade opening) to turn the light on.
• Pwyswch y botwm eto i ddiffodd y golau.
• The LED features an automatic shut-off function after 60 seconds of inactivity to conserve battery life.

Figure 4: The LED light illuminates the measurement area for clear readings.

Darllen Mesuriadau

The tape measure features a double-sided blade print, allowing for easy reading from various angles, including overhead measurements.

Figure 5: The double-sided blade print facilitates overhead measurements.

Cynnal a chadw

Glanhau

• Regularly wipe the blade and case with a clean, damp brethyn i gael gwared â llwch a malurion.
• Avoid using harsh chemicals or abrasive cleaners, as these can damage the blade markings or case finish.
• Ensure the blade is dry before fully retracting it into the case to prevent rust.

Gofal Batri

• Recharge the battery when the LED light dims or fails to illuminate.
• For long-term storage, charge the battery to approximately 50% and store in a cool, dry place.

Storio

• Store the tape measure in a dry environment, away from extreme temperatures.
• The ToughSeries design provides a 100ft drop rating, but proper storage helps prolong the tool's lifespan.

Datrys problemau

Golau LED Ddim yn Gweithio

• Gwiriwch lefel y batri: The battery may be depleted. Connect the tape measure to a USB power source and allow it to charge for at least 30 minutes before attempting to use the LED again.
• Ensure Proper Activation: Press the LED power button firmly.

Nid yw'r llafn yn tynnu'n ôl yn esmwyth

• Glanhewch y llafn: Dust, dirt, or debris on the blade can hinder retraction. Extend the blade fully and carefully wipe it clean with a damp brethyn.
• Gwirio am rwystrau: Inspect the blade opening for any foreign objects that might be blocking the blade's path.

Slide Lock Not Engaging/Disengaging

• Clirio malurion: Ensure no debris is lodged around the slide lock mechanism.
• Gweithrediad Priodol: Confirm you are pushing the slide lock fully forward to engage and fully backward to disengage.

Manylebau

Gwybodaeth Gwarant

DEWALT products are typically covered by a limited warranty. For specific warranty terms and conditions applicable to your region and product, please refer to the official DEWALT websafle neu cysylltwch â'u cymorth cwsmeriaid. Cadwch eich prawf prynu ar gyfer hawliadau gwarant.

Cefnogaeth i Gwsmeriaid

For technical assistance, replacement parts, or further inquiries regarding your DEWALT ToughSeries 25ft Illuminated Tape Measure (Model DWHT35625S), please visit the official DEWALT website or contact their customer service department. When contacting support, please have your model number (DWHT35625S) and purchase details readily available.