Luqeeg Digital Wooden Alarm Clock User Manual

1. Rhagymadrodd

Thank you for choosing the Luqeeg Digital Wooden Alarm Clock. This device combines functionality with a minimalist design, offering time, date, temperature display, and alarm features. Its LED display and wooden finish make it a suitable addition to various environments such as offices, bedrooms, or bedside tables. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance.

Image 1.1: The Luqeeg Digital Wooden Alarm Clock in a home setting.

2. Gwybodaeth Diogelwch

• Peidiwch ag amlygu'r ddyfais i ddŵr na lleithder uchel.
• Osgoi tymereddau eithafol a golau haul uniongyrchol.
• Peidiwch â gollwng y ddyfais na dioddef effeithiau cryf.
• Cadwch allan o gyrraedd plant.
• Defnyddiwch y cebl USB a ddarperir yn unig ar gyfer pŵer.
• Gwaredu batris yn gyfrifol yn unol â rheoliadau lleol.

3. Cynnwys Pecyn

Gwiriwch y pecyn am yr eitemau canlynol:

• 1 x Luqeeg LED Wooden Clock
• 1 x Cebl USB
• 1 x Llawlyfr Defnyddiwr (y ddogfen hon)

4. Cynnyrch Drosview

Familiarize yourself with the buttons and ports on the back of your alarm clock:

Delwedd 4.1: Cefn view of the clock with labeled controls.

• Achos Batri: Compartment for 3 AAA batteries (not included) for backup power.
• Power Adapter Jack: Connect the USB cable for primary power.
• AILOSOD Allwedd: Resets the clock to factory settings.
• DOWN Adjustment Key: Decreases values during setting.
• UP Adjustment Key: Increases values during setting.
• Allwedd SET: Enters setting mode and confirms selections.

5. Gosod

5.1 Pweru'r Dyfais

The clock can be powered via the included USB cable or by batteries for backup. For continuous operation, it is recommended to use the USB power supply.

1. Primary Power (USB): Connect the small end of the USB cable to the Power Adapter Jack on the back of the clock. Connect the other end to a USB power adapter (not included) or a powered USB port.
2. Gwneud copi wrth gefn o'r batri: Open the Battery Case on the back. Insert 3 AAA batteries (not included) into the compartment, ensuring correct polarity. Additionally, insert 1 CR2032 button cell battery (not included) for memory function, which retains settings during power outages.

Image 5.1: The clock with its USB cable for power connection.

6. Cyfarwyddiadau Gweithredu

6.1 Moddau Arddangos Sylfaenol

The clock cycles through displaying time, date, and temperature. You can usually switch between display modes by pressing the UP or DOWN button outside of setting mode.

6.2 Pennu Amser a Dyddiad

1. Gwasgwch y GOSOD botwm unwaith i fynd i mewn i'r modd gosod amser. Bydd y digidau awr yn fflachio.
2. Defnyddiwch y UP a I LAWR botymau i addasu'r awr.
3. Gwasgwch GOSOD eto i symud i osod munudau. Addaswch gyda UP a I LAWR.
4. Parhewch i bwyso GOSOD i gylchu trwy osodiadau blwyddyn, mis a diwrnod, gan addasu pob un gyda UP a I LAWR.
5. Gwasgwch GOSOD one last time to exit setting mode.

6.3 Gosod y Larwm

The clock supports multiple alarms (e.g., AL1, AL2, AL3). The exact number may vary by model.

1. Gwasgwch y GOSOD button repeatedly until 'AL' appears, indicating alarm setting mode.
2. Gwasgwch GOSOD again to select an alarm (e.g., AL1). The hour digits will flash.
3. Defnydd UP a I LAWR i osod yr awr larwm a ddymunir.
4. Gwasgwch GOSOD to move to minute setting. Adjust with UP a I LAWR.
5. Gwasgwch GOSOD to confirm the alarm time. You may then see an option to enable/disable the alarm (ON/OFF). Use UP/I LAWR i ddewis.
6. Repeat for other alarms if desired. Press GOSOD i adael y modd gosod larwm.

6.4 Addasiad Disgleirdeb

The clock features 3 levels of brightness. To adjust, press the UP button outside of setting mode. Each press will cycle through the brightness levels.

6.5 Voice Control Power Saving Mode

To conserve power, the display can be set to turn off automatically and activate only when sound is detected (e.g., a clap or tap). This mode is typically enabled or disabled by a long press of the I LAWR button or a specific combination of buttons. Refer to the quick start guide for your specific model if this function is not immediately apparent.

Image 6.1: Demonstrating the voice control power saving mode.

7. cynnal

• Glanhau: Wipe the clock gently with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Amnewid Batri: If using battery backup, replace AAA batteries when the display dims or functions become erratic. Replace the CR2032 memory battery periodically (e.g., annually) to ensure settings are retained during power interruptions.

8. Datrys Problemau

9. manylebau

10. Gwarant a Chefnogaeth

This product comes with a standard manufacturer's warranty. For warranty claims, technical support, or any questions regarding the operation of your Luqeeg Digital Wooden Alarm Clock, please contact the retailer or manufacturer's customer service. Please have your model number (Luqeeggxwrao5h2y8620) and purchase information ready when contacting support.