Bellemave L-Shape Triple Bunk Bed (Model B0B97D3SLH)
Bellemave L-Shape Triple Bunk Beds Instruction Manual
Model: L-Shape Triple Bunk Bed (B0B97D3SLH)
Brand: Bellemave
1. Rhagymadrodd
This manual provides detailed instructions for the assembly, operation, and maintenance of your Bellemave L-Shape Triple Bunk Bed. This bed features a Twin over Full configuration with integrated stairs, storage drawers, and an attached loft bed, designed to accommodate multiple users efficiently. Please read this manual thoroughly before beginning assembly or use to ensure safe and proper installation and operation.

Image 1.1: The Bellemave L-Shape Triple Bunk Bed, showcasing its Twin over Full configuration, integrated stairs, and attached loft bed, situated in a bedroom environment.
2. Gwybodaeth Diogelwch
WARNING: Exceeding the maximum weight capacity may cause damage to the bed or injury. Improper assembly may lead to instability or collapse. Always use the provided mesh guardrails to ensure safety and security.
- Always ensure all bolts and screws are securely tightened before use. Periodically check and re-tighten hardware.
- Do not allow children under 6 years of age on the upper bunk.
- Use only mattresses that comply with the recommended thickness and dimensions for each bed.
- Gwahardd mwy nag un person ar y bync uchaf.
- Always use the ladder or stairs for entering and exiting the upper bunk. Do not use the bed as a jumping surface.
- Ensure the area around the bed is clear of obstructions.
- Peidiwch â gosod na hongian eitemau i unrhyw ran o'r gwely bync nad ydynt wedi'u cynllunio i'w defnyddio gyda'r gwely; ar gyfer cynampbachau, gwregysau neu raffau neidio, ond heb fod yn gyfyngedig i.
3. Cynnwys Pecyn
Your Bellemave L-Shape Triple Bunk Bed is shipped in 3 packages. Please verify that all components are present and undamaged before beginning assembly. If any parts are missing or damaged, contact customer support immediately.
- Pine Wood and MDF Frame Components
- Bed Slats (14 pcs per bed)
- Integrated Stairs with Storage Compartments
- Storage Drawers (3 pcs)
- Ysgol
- Rheiliau gwarchod
- Hardware Pack (screws, bolts, nuts, Allen wrench)
- Llawlyfr Cyfarwyddiadau Cydosod

Delwedd 3.1: Ffrwydrad view of the Bellemave L-Shape Triple Bunk Bed, illustrating the main structural components including the bed frames, slats, stairs, and drawers.
4. Gosod a Chynulliad
Assembly of the Bellemave L-Shape Triple Bunk Bed requires two adults and approximately 2-3 hours. Basic tools such as a Phillips head screwdriver and a hammer may be needed in addition to the provided Allen wrench.
4.1. Paratoi
- Cliriwch ardal eang ar gyfer ymgynnull, yn ddelfrydol ger lleoliad terfynol y gwely.
- Unpack all components and lay them out, identifying each part using the provided parts list (if applicable).
- Cadwch yr holl galedwedd wedi'i drefnu ac o fewn cyrraedd.
4.2. Camau'r Cynulliad
- Begin by assembling the main frames for the Twin and Full beds according to the diagrams. Ensure all connections are finger-tightened initially.
- Attach the support beams and side rails to form the bed structures.
- Assemble the integrated stairs unit. Pay close attention to the orientation of the storage compartments.
- Connect the stairs unit to the Twin bunk bed frame.
- Assemble the loft bed frame and attach it to the main structure, forming the L-shape.
- Install the bed slats onto all three bed frames, ensuring even spacing and secure attachment.
- Attach all guardrails to the upper bunks and the loft bed.
- Assemble the three storage drawers and slide them into their designated spaces beneath the Full bed.
- Finally, attach the ladder to the loft bed.
- Once all components are in place, systematically tighten all bolts and screws using the provided Allen wrench and your screwdriver. Do not overtighten.

Delwedd 4.1: Ongl view of the fully assembled Bellemave L-Shape Triple Bunk Bed, showing the integrated stairs, ladder, and the overall L-shaped configuration.
5. Cyfarwyddiadau Gweithredu
5.1. Using the Beds
- Upper Twin Bunk: Designed for one occupant. Access via the integrated stairs. Maximum weight capacity: 250 lbs.
- Lower Full Bunk: Designed for one occupant. Maximum weight capacity: 275 lbs.
- Gwely Loft: Designed for one occupant. Access via the ladder. Maximum weight capacity: 250 lbs.
5.2. Using the Stairs and Ladder
- Always face the stairs/ladder when ascending or descending.
- Ensure hands are free to grip the handrails or ladder rungs.
- Do not skip steps or rungs.
5.3. Using the Storage Drawers
- The three drawers under the Full bed are designed for light storage, such as bedding, clothes, or toys.
- Avoid overloading the drawers to prevent damage to the runners or the drawer itself.
- The stairs also feature integrated storage compartments. Open and close gently.

Delwedd 5.1: Manylion view of the integrated stairs, highlighting the built-in storage compartments within each step.
6. cynnal
- Glanhau: Sychwch ffrâm y gwely gyda lliain meddal, damp brethyn. Osgowch ddefnyddio cemegau llym, glanhawyr sgraffiniol, neu sgleiniau a allai niweidio gorffeniad y pren.
- Gwiriad Caledwedd: Periodically (e.g., every 3-6 months) inspect all bolts, screws, and connections. Re-tighten any loose hardware to maintain stability and safety.
- estyll: Ensure all bed slats remain securely in place and are not cracked or broken. Replace any damaged slats immediately.
- droriau: Keep drawer runners clean and free of debris to ensure smooth operation.
7. Datrys Problemau
| Problem | Achos Posibl | Ateb |
|---|---|---|
| Mae'r gwely'n siglo neu'n teimlo'n ansefydlog | Loose hardware connections. | Gwiriwch a thynhewch yr holl folltau a sgriwiau. Gwnewch yn siŵr bod y gwely ar arwyneb gwastad. |
| Synau gwichian | Loose connections, friction between wood parts or slats. | Tighten all hardware. Apply a small amount of wax or silicone spray to points of friction between wood components or where slats meet the frame. |
| Mae droriau'n glynu neu ddim yn llithro'n esmwyth | Debris in runners, misaligned drawers, or overloaded. | Remove drawers and clean runners. Check for proper alignment. Reduce contents if overloaded. |
| Ladder/Stairs feel loose | Mae'r caledwedd gosod yn rhydd. | Re-tighten all bolts securing the ladder/stairs to the bed frame. |
8. manylebau
| Nodwedd | Manylyn |
|---|---|
| Dimensiynau Cynnyrch (Yn gyffredinol) | 118.3''H x 96.8''L x 61.2''U |
| Deunydd | Pine Wood + MDF |
| Ffurfweddiad Maint | Twin (Upper), Full (Lower), Twin (Loft) |
| Capasiti Pwysau Gwely Uchaf | 250 pwys |
| Lower Bed Weight Capacity | 275 pwys |
| Loft Bed Weight Capacity | 250 pwys |
| Recommended Upper Bed Mattress Thickness | 6'' |
| Recommended Down Bed Mattress Thickness | 8'' |
| Number of Bed Slats (Each Bed) | 14 pcs |
| Cynulliad Angenrheidiol | Oes |
| Number of Packages | 3 |

Image 8.1: A technical diagram illustrating the precise dimensions of the Bellemave L-Shape Triple Bunk Bed in inches.
9. Gwarant a Chefnogaeth
Bellemave products are manufactured with quality and durability in mind. While specific warranty details are not provided in this manual, please retain your proof of purchase for any potential warranty claims.
For customer support, missing parts, or any inquiries regarding your Bellemave L-Shape Triple Bunk Bed, please contact the seller or Bellemave customer service through the retailer's platform or the official Bellemave website. Provide your product model number (B0B97D3SLH) and a detailed description of your issue for prompt assistance.
Gallwch hefyd ymweld â'r Bellemave Store on Amazon am ragor o wybodaeth ac opsiynau cysylltu.
Dogfennau Cysylltiedig - L-Shape Triple Bunk Bed (Model B0B97D3SLH)
![]() |
Bellemave Bunk Bed Assembly Instructions - FU291CPCAN Comprehensive assembly guide for the Bellemave FU291CPCAN bunk bed. Includes detailed steps for configuring as three single beds or a stacked bunk bed, with part lists, hardware, and safety information. |
![]() |
Assembly Instructions for Bellemave Twin Loft Bed with Stair (Model YX5525) Detailed assembly instructions for the Bellemave Twin Loft Bed with Stair, model YX5525. Includes a comprehensive part list, hardware list, and step-by-step guidance with textual descriptions of diagrams. |
![]() |
Bellemave W00496AAB Bunk Bed Assembly Instructions Assembly instructions for the Bellemave W00496AAB bunk bed, featuring a basketball hoop, climbing wall, and slide. Includes safety warnings, parts list, and step-by-step assembly guide. |
![]() |
Twin House Bed Assembly Instructions - SWB001/SWB002 Detailed assembly instructions for the Bellemave Twin House Bed (models SWB001/SWB002), including a part list, hardware list, and step-by-step guidance for construction. |
![]() |
Assembly Instructions for Twin House Floor Bed with Fence Detailed assembly instructions for the Bellemave Twin House Floor Bed with Fence, including a parts list, hardware list, and step-by-step guidance. |
![]() |
Assembly Instructions: YN00499 Twin Floor Bed Step-by-step assembly instructions for the Bellemave YN00499 Twin Floor Bed. Includes parts list, hardware list, and assembly steps for easy setup. |
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.





