Sinotimer Digital Programmable Timer TM618N-2 User Manual

1. Cynnyrch Drosview

The Sinotimer TM618N-2 is a versatile 7-day weekly digital programmable timer designed for automated control of electrical equipment. It allows users to set specific daily or weekly schedules for turning devices on and off, ensuring efficient energy management and convenience. This timer is suitable for a wide range of applications, including controlling lighting, heating, ventilation, and other electrical appliances.

Ffigur 1: Blaen view of the Sinotimer TM618N-2 Digital Timer, showing the display and control buttons.

2. Nodweddion Allweddol

• Rhaglenadwy Wythnosol: Allows up to 16 ON/OFF programs per day or week.
• Aml-swyddogaethol: Includes Clock display, Timer, Countdown, Automatic weekly time deviation correction, and Sleep mode.
• Cynhwysedd Uchel: Yn cefnogi 16 Amp / 220 Volt AC loads.
• Cyfrol Eangtage Cydnawsedd: Operates with 220V, 230V, 240V AC.
• Batri adeiledig: Yn cadw gosodiadau yn ystod pŵer outages (Lithium battery type).
• Cymwysiadau Amlbwrpas: Ideal for controlling dryers, defrosting equipment, swimming pool pumps, gates, lighting, and more.

3. manylebau

4. Gosod

Hysbysiad Diogelwch Pwysig: Installation should only be performed by a qualified electrician. Ensure power is disconnected before attempting any wiring.

1. Mowntio: The TM618N-2 is designed for DIN rail mounting or screw mounting. Secure the timer in a suitable electrical enclosure.
2. Gwifrau: Refer to the wiring diagram on the back of the unit.
   

   Ffigur 2: Yn ôl view of the Sinotimer TM618N-2, showing input/output terminals and wiring diagram.

   • Input (Terminals 1 & 2): Connect your 200-250VAC power supply to these terminals.
   • Output (Terminals 3, 4, & 5):
     • Terminal 3: Common (COM)
     • Terminal 4: Normally Open (NO) - Connect your load here for switched power.
     • Terminal 5: Normally Closed (NC) - (Less commonly used for timer applications, but available).
3. Pŵer Ymlaen: Once wiring is complete and secure, restore power to the circuit. The timer display should illuminate.

Figure 3: Technical drawing showing the dimensions of the Sinotimer TM618N-2 timer.

5. Cyfarwyddiadau Gweithredu

5.1. Swyddogaethau Botwm

• CLOC: Fe'i defnyddir i osod yr amser a'r diwrnod cyfredol.
• PROG: Enters/exits programming mode for ON/OFF schedules.
• WYTHNOS: Selects the day(s) of the week during time or program setting.
• AWR: Adjusts the hour during time or program setting.
• MIN: Adjusts the minute during time or program setting.
• COFIO: Recalls or cancels a program setting.
• LLAWLYFR: Manually overrides the timer's current state (ON/AUTO/OFF).
• R (Reset): Small button (requires a pointed object) to reset the timer to factory defaults.

5.2. Gosod yr Amser a'r Diwrnod Cyfredol

1. Pwyswch a dal y CLOC botwm.
2. Wrth ddal CLOC, gwasg WYTHNOS to set the current day (MO, TU, WE, TH, FR, SA, SU).
3. Wrth ddal CLOC, gwasg AWR i osod yr awr bresennol.
4. Wrth ddal CLOC, gwasg MIN i osod y funud gyfredol.
5. Rhyddhewch y CLOC botwm i achub y gosodiadau.

5.3. Programming ON/OFF Schedules

The timer supports up to 16 ON and 16 OFF programs. Each program can be set for a specific day or group of days.

1. Gwasgwch y PROG botwm unwaith. Bydd yr arddangosfa yn dangos "1 ON".
2. Gwasgwch WYTHNOS repeatedly to select the desired day(s) for this program (e.g., MO, TU, WE, TH, FR, SA, SU; MO-FR; SA-SU; MO-SA; etc.).
3. Gwasgwch AWR i osod yr awr ON a ddymunir.
4. Gwasgwch MIN i osod y funud ON a ddymunir.
5. Gwasgwch PROG eto. Bydd yr arddangosfa yn dangos "1 OFF".
6. Repeat steps 2-4 to set the desired OFF time for the first program.
7. Gwasgwch PROG to move to the next program ("2 ON", "2 OFF", etc.) and repeat the process for up to 16 programs.
8. To exit programming mode and save settings, press the CLOC botwm.

5.4. Gwrthwneud Llawlyfr

Gwasgwch y LLAWLYFR button to cycle through the output modes:

• AR: Output is continuously ON, ignoring programs.
• CAR: Output follows the programmed schedules.
• I FFWRDD: Output is continuously OFF, ignoring programs.

Gwnewch yn siŵr bod yr amserydd i mewn AWTO mode for programmed operation.

5.5. Ailosod yr Amserydd

To clear all settings and return the timer to its factory default state, insert a pointed object (like a paperclip) into the small R (Reset) hole and press gently.

6. cynnal

The Sinotimer TM618N-2 requires minimal maintenance.

• Cadwch y ddyfais yn lân ac yn rhydd o lwch. Defnyddiwch frethyn meddal, sych i'w lanhau.
• Peidiwch â defnyddio glanhawyr neu doddyddion sgraffiniol.
• Ensure the timer is installed in a dry environment, away from direct moisture or extreme temperatures.
• The internal battery is designed for long life and is not user-replaceable. If the display goes blank or settings are not retained after a power outage, the battery may need professional service.

7. Datrys Problemau

8. Gwarant a Chefnogaeth

Am wybodaeth am y warant a chymorth technegol, cyfeiriwch at y ddogfennaeth a ddarparwyd gyda'ch pryniant neu cysylltwch â'ch manwerthwr. Cadwch eich prawf prynu ar gyfer hawliadau gwarant.

Manufacturer: Sinotimer