eRapta HD 1080p Backup Camera System Kit (Model AYX104)

1. Rhagymadrodd

This manual provides detailed instructions for the installation, operation, and maintenance of your eRapta HD 1080p Backup Camera System Kit. This system is designed to enhance driving safety and visibility for various large vehicles, including RVs, trailers, motorhomes, trucks, campers, tractors, and box trucks, operating on a DC 12-24V power supply. It features a 10-inch high-resolution monitor with quad-split display capabilities and four IP69K waterproof cameras for comprehensive surveillance.

Figure 1: eRapta HD 1080p Backup Camera System Kit showing the 10-inch monitor and four cameras.

2. Gwybodaeth Diogelwch

• Gosodiad Proffesiynol a Argymhellir: For optimal performance and safety, professional installation is advised.
• Cyflenwad Pŵer: Ensure the system is connected to a DC 12-24V power source. Incorrect voltage gall niweidio'r uned.
• Gwifrau: Secure all wiring to prevent interference, short circuits, or damage from vehicle movement and environmental factors.
• Diddosi: While cameras are IP69K rated, ensure all cable connections are properly sealed and protected from moisture.
• Gwelededd: Do not obstruct the monitor or camera views. Regularly clean camera lenses for clear images.
• Diogelwch Gyrru: The camera system is an aid; always perform visual checks and exercise caution while driving or maneuvering your vehicle.

3. Cynnwys Pecyn

Gwiriwch fod yr holl eitemau a restrir isod wedi'u cynnwys yn eich pecyn:

• 1x 10-inch Monitor
• 2x Side Cameras
• 2x Rear Cameras
• 2x 33 ft (10m) Video Cables
• 2x 66 ft (20m) Video Cables
• Cord Pŵer 1x
• 2x Monitor Brackets (U-shaped and Fan-shaped)
• 1x Rheolaeth Anghysbell
• Installation Kits (screws, mounting hardware)

Figure 2: Complete list of components included in the package.

4. Gosod a Gosod

4.1 Gosod y Monitor

1. Choose a suitable location on your dashboard or overhead console that does not obstruct your view neu ymyrryd â rheolyddion gyrru.
2. Attach the chosen bracket (U-shaped or fan-shaped) to the monitor using the provided screws.
3. Securely mount the monitor to the chosen surface. Ensure it is stable and can withstand vehicle vibrations.

4.2 Mounting the Cameras

The system includes two side cameras and two rear cameras. They can be installed in various positions to cover blind spots.

• Camerâu Cefn: Typically mounted at the rear of the vehicle, often above the license plate or on the bumper.
• Camerâu Ochr: Mount on the left and right sides of the vehicle, usually near the rear-view mirrors or further back on the vehicle body, depending on the vehicle type (RV, truck, trailer).

Figure 3: Recommended camera installation points for comprehensive coverage.

4.3 Wiring Diagram and Power Connection

Follow the wiring diagram carefully to ensure correct connections. The system supports DC 12-24V power input.

1. Connect the red wire to the positive (+) terminal of an ACC (Accessory) power source.
2. Connect the yellow wire to a constant positive (+) power source.
3. Connect the black wire to a negative (-) ground point.
4. Connect the 4-pin extension cables from the cameras to the monitor's corresponding inputs. Ensure the notches on the connectors are aligned to prevent damage.
5. Gwifrau Sbardun: The brown, green, blue, and grey trigger wires (for CH1, CH2, CH3, CH4 respectively) can be connected to specific vehicle signals (e.g., reverse light, turn signals) to automatically switch camera views. This connection is optional and depends on your preference.

Figure 4: Wiring connections for the monitor and cameras.

4.4 Rheoli Ceblau

Route all cables securely along the vehicle's frame or interior. Use cable ties to prevent loose wires that could interfere with moving parts or become damaged. Ensure cables are protected from heat, sharp edges, and moisture.

5. Cyfarwyddiadau Gweithredu

5.1 Pweru Ymlaen/Diffodd

The monitor will power on automatically when the vehicle's ignition is turned on (if connected to ACC power) or when the designated power switch is activated. Press the 'POWER' button on the monitor or remote control to manually turn the unit on or off.

5.2 Monitro Rheolaethau

The monitor features several buttons for navigation and settings adjustment. A remote control is also provided for convenience.

• CYFARWYDDIADAU: Cycles through different display modes (single, dual, quad split).
• CH: Selects the active camera channel in single-view modd.
• BWYDLEN: Yn cyrchu'r ddewislen gosodiadau system.
• +/-: Adjusts settings or navigates menu options.
• IAWN: Yn cadarnhau dewisiadau.

5.3 Viewmodau ing

The 10-inch monitor supports various viewffurfweddiadau:

• Sgrin Llawn: Yn arddangos un camera view.
• Dual Split: Shows two camera views ar yr un pryd.
• Rhaniad cwad: Displays all four camera views at once, providing a comprehensive 360-degree perspective.

Figure 5: Different display modes for multi-camera viewing.

5.4 Loop Recording and Playback

The built-in DVR supports simultaneous recording from all cameras. The system automatically deletes older content when the SD card is full (up to 128GB supported).

• Recordio: Insert an SD card (up to 128GB) into the monitor. Recording will begin automatically when the system is powered on.
• Chwarae yn ôl: Access the 'Playback' option from the main menu to review foo wedi'i recordiotage.

Figure 6: Loop recording functionality for continuous video capture.

5.5 Addasiad Canllawiau Parcio

The system allows for customization of parking guidelines to assist with maneuvering. You can adjust width, height, and horizontal position.

Figure 7: Customizable parking assistance lines for precise maneuvering.

5.6 Gweledigaeth Nos

The cameras are equipped with infrared lights and multi-layer glass lenses, combined with an ARM DSPS High-speed processor, to provide clear and colorful night images, enhancing visibility in low-light conditions.

Figure 8: Enhanced night vision capabilities for improved low-light visibility.

6. cynnal

• Glanhau: Regularly clean camera lenses and the monitor screen with a soft, damp brethyn. Osgoi glanhawyr sgraffiniol.
• Diddosi: Periodically inspect camera housings and cable connections for any signs of wear or damage. Re-seal any compromised areas with appropriate silicone sealant to maintain IP69K water resistance.
• Archwiliad cebl: Check all wiring for fraying, pinches, or loose connections, especially after long trips or exposure to harsh weather.
• Diweddariadau Meddalwedd: Check the eRapta official websafle ar gyfer unrhyw ddiweddariadau cadarnwedd sydd ar gael i sicrhau perfformiad gorau posibl a mynediad at nodweddion newydd.

Figure 9: Cameras are designed for durability in various weather conditions.

7. Datrys Problemau

7.1 No Signal Displayed

• Check all power connections to the monitor and cameras.
• Ensure all video cables are securely connected and not damaged.
• Verify that the correct camera channel is selected on the monitor.

7.2 Upside-Down Menu After Reset

If the menu appears upside down after a system reset, follow these steps to correct the orientation:

1. Long-press the 'M' button on the monitor for 5 seconds to enter the settings page.
2. Press the 'OK' button repeatedly to navigate through the menu options until you reach the 'Rotation' setting.
3. Use the '-' button to select 'MODE 2' for the correct rotation.
4. Press the 'OK' button four times to save the setting and exit the menu.

Video 1: Guide to fixing an upside-down menu orientation after a system reset.

7.3 Problemau Ansawdd Delwedd

• Clean camera lenses and monitor screen.
• Check for any physical damage to cameras or cables.
• Ensure proper lighting conditions for optimal image clarity.

8. manylebau

9. Gwarant a Chefnogaeth

eRapta products are designed for reliability and performance. For warranty information, technical support, or assistance with your product, please refer to the contact details provided with your purchase or visit the official eRapta websafle. Cadwch eich derbynneb prynu fel prawf o brynu ar gyfer hawliadau gwarant.