Klipsch Reference R-50M Bookshelf Speakers Instruction Manual

1. Rhagymadrodd

This instruction manual provides essential information for the proper setup, operation, and maintenance of your Klipsch Reference R-50M Bookshelf Speakers. Please read this manual thoroughly before using your speakers to ensure optimal performance and longevity.

Delwedd 1.1: Blaen onglog view of the Klipsch R-50M Bookshelf Speaker, showcasing the Tractrix horn and spun-copper woofer.

2. Beth sydd yn y Bocs

Gwiriwch fod yr holl gydrannau yn bresennol yn y pecyn:

• Two (2) Klipsch R-50M Bookshelf Speakers

3. Gosod

3.1 Lleoliad Siaradwyr

Proper speaker placement is crucial for achieving optimal sound quality. Consider the following guidelines:

• Gosodiad Stereo: For a traditional stereo setup, place the speakers equidistant from your primary listening position and spaced apart to form an equilateral triangle.
• Bookshelf/Shelf Mounting: When placing on a shelf or stand, ensure the speakers are at ear level when seated. Avoid placing them directly against a wall if possible. If wall-mounting, maintain at least a 1.5-inch air gap between the rear of the speaker and the wall to allow for proper bass port function.
• Acwsteg ystafell: Experiment with toe-in (angling speakers towards the listening position) to fine-tune the soundstage a delweddu.

Delwedd 3.1: Enghraifftample of Klipsch R-50M speakers integrated into a home theater environment, demonstrating typical placement.

3.2 Connecting Your Speakers

The R-50M speakers connect to your amplifier or receiver using standard speaker cables. Ensure your ampmae'r lifter wedi'i ddiffodd cyn gwneud unrhyw gysylltiadau.

1. Nodwch y terfynellau positif (+) a negatif (-) ar eich dau amplifier and the R-50M speakers. The R-50M features red (+) and black (-) binding posts.
2. Cysylltwch y derfynell bositif (+) ar eich amplifier to the red (+) terminal of the speaker.
3. Cysylltwch y derfynell negyddol (-) ar eich amplifier to the black (-) terminal of the speaker.
4. Gwnewch yn siŵr bod yr holl gysylltiadau'n ddiogel i atal colli signal neu gylchedau byr.

Delwedd 3.2: Cefn view of the Klipsch R-50M speaker, highlighting the speaker cable input terminals and rear-firing port.

4. Operating Your Speakers

Once connected, your Klipsch R-50M speakers are ready for use. Turn on your amplifier or receiver and select the appropriate input source. Adjust the volume to your desired listening level. The R-50M speakers are designed for a wide range of audio content, from music to home theater applications.

4.1 Grille Attachment

The R-50M speakers come with low-profile magnetic grilles. You can choose to use the speakers with or without the grilles. Removing the grilles may offer a slightly more open sound and reveals the aesthetic of the spun-copper woofers and Tractrix horn.

Delwedd 4.1: Blaen view of the Klipsch R-50M speaker with the protective magnetic grille attached.

5. cynnal

To maintain the appearance and performance of your Klipsch R-50M speakers, follow these simple maintenance tips:

• Glanhau: Dust the cabinet surfaces regularly with a soft, dry cloth. For stubborn marks, a slightly damp gellir defnyddio lliain, ac yna lliain sych. Osgowch lanhawyr sgraffiniol neu doddyddion.
• rhwyllau: The magnetic grilles can be gently removed and dusted. If necessary, they can be carefully vacuumed with a soft brush attachment.
• Amgylchedd: Osgowch amlygu'r siaradwyr i olau haul uniongyrchol, tymereddau eithafol, neu leithder uchel.

6. Datrys Problemau

If you encounter issues with your Klipsch R-50M speakers, refer to the following common troubleshooting steps:

• Dim Sain:
  • Sicrhewch eich ampmae'r golau haearn/derbynnydd wedi'i bweru ymlaen a bod y ffynhonnell fewnbwn gywir wedi'i dewis.
  • Gwiriwch yr holl gysylltiadau cebl siaradwr yn y ddau amplifier and the speakers for proper polarity and secure contact.
  • Gwiriwch fod y gyfrol ar eich amplifier/receiver is not set to minimum or muted.
• Sain ystumiedig:
  • Gostyngwch lefel y sain ar eich ampllestr/derbynnydd.
  • Check speaker cable connections for any loose strands that might be causing a short circuit.
  • Sicrhewch eich amplifier's power output is within the recommended range for the R-50M speakers.
• Uneven Sound from Speakers:
  • Gwiriwch y gosodiadau cydbwysedd ar eich ampllestr/derbynnydd.
  • Verify that both speakers are connected with correct polarity.

If these steps do not resolve the issue, please contact Klipsch customer support for further assistance.

7. manylebau

Detailed technical specifications for the Klipsch R-50M Bookshelf Speakers:

Image 7.1: Dimensional diagram of the Klipsch R-50M Bookshelf Speaker.

7.1 Technolegau Allweddol

• 90° x 90° Tractrix Horn: This updated horn design provides precise directivity control over a wide frequency range, enhancing high-frequency detail and soundstage cywirdeb.

Image 7.2: Illustration of the 90° x 90° Tractrix Horn, designed for improved sound directivity.
• Linear Travel Suspension (LTS) Aluminum Tweeter with Kapton Suspension: Minimizes distortion for detailed high-frequency reproduction. Aluminum's light and rigid properties contribute to high efficiency and resolution.


Delwedd 7.3: Ffrwydrodd view diagram detailing the components of the LTS Aluminum Tweeter.

• Spun-Copper Thermoformed Crystalline Polymer (TCP) Woofers: Derived from Klipsch Reference Premiere series, these woofers feature steeper cone angling for smoother response, improved accuracy, and transparency.


Delwedd 7.4: Llun agos view of the Spun-Copper TCP Woofer, highlighting its material and design.

• High-Quality Cabinet Design: Reinforced 3/4” MDF construction with an advanced bracing design reduces cabinet vibration, contributing to improved sonic accuracy. The scratch-resistant, textured wood grain vinyl finish provides durability and a modern aesthetic.

Image 7.5: Cutaway diagram showcasing the internal bracing and MDF construction of the speaker cabinet.

8. Gwybodaeth Diogelwch

Cofiwch gadw at y rhagofalon diogelwch canlynol:

• Do not expose speakers to water or excessive moisture. The product is not waterproof.
• Sicrhewch awyru priodol o amgylch y seinyddion i atal gorboethi.
• Avoid placing speakers near heat sources or in direct sunlight.
• Use only recommended speaker cables and ensure correct polarity during connection.
• Do not attempt to open or service the speakers yourself. Refer all servicing to qualified service personnel.
• Cadwch allan o gyrraedd plant.

9. Gwarant a Chefnogaeth

Your Klipsch R-50M Bookshelf Speakers come with a Limited Warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Klipsch websafle.

For technical support, service inquiries, or additional information, please contact Klipsch customer support through their official websafle neu'r manylion cyswllt a ddarperir yn nogfennaeth eich cynnyrch.