1. Gwybodaeth Diogelwch
Please read all safety instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or other injuries.
- Trowch y pŵer i ffwrdd: Datgysylltwch y pŵer wrth y torrwr cylched neu'r blwch ffiwsiau bob amser cyn gosod, cynnal a chadw neu dynnu'r switsh.
- Trydanwr Cymwys: Dylai trydanwr cymwys gyflawni'r gosodiad yn unol â'r holl godau trydanol lleol a chenedlaethol.
- Cyftage: Sicrhewch y cyfaint gweithredutage of your electrical system matches the switch's specifications (250V).
- Gwifrau: Verify all wire connections are secure and correctly identified (Live, Neutral, Load).
- Amgylchedd: Peidiwch â gosod mewn gwlyb neu damp locations. This product is rated IP65 for protection against dust and low-pressure water jets, but it is not submersible.
- Plant: Cadwch ddeunyddiau pecynnu a rhannau bach i ffwrdd o blant.
2. Cynnyrch Drosview
The CNBINGO Double Rocker Switch (Model M1-P105) is designed for controlling lighting circuits from one or two locations. It features a modern crystal glass panel and phosphorescent dots for visibility in low light.
2.1 Cydrannau
Delwedd: Ffrwydrodd view showing the luxury crystal glass panel, integrated security module, and metal frame of the switch.
- Luxury Crystal Glass Panel: Provides a modern aesthetic and is easy to clean.
- Integrated Security Module: Houses the electrical components and ensures safe operation.
- Ffrâm Metel: Provides structural support and facilitates secure mounting.
2.2 Nodweddion Allweddol
- Phosphorescent Dots: Three green dots on each rocker glow faintly in the dark after absorbing light, aiding visibility without disturbing sleep.
- Two-Way Control: Can be used as a two-way switch or a 1-pole ON/OFF switch to control lights from one or two locations.
- Adeiladu Gwydn: Features a fire-protective PC plate, glass panel, and modular housing. Internal components use fluorescent copper and metal for extended lifespan (up to 25 years).
- Maint Safonol: Designed to fit standard 86 x 86mm flush-mounted boxes with a 21mm mounting depth.
3. manylebau
| Brand | CNBINGO |
| Rhif Model | M1-P105 |
| Dimensiynau Cynnyrch (L x W x H) | 8.6 x 8.6 x 3 cm |
| Pwysau Eitem | 180 gram |
| Modd Gweithredu | AR-OFF |
| Graddfa Gyfredol | 10 A |
| Vol Gweithredutage | 250 folt |
| Math Cyswllt | Ar gau fel arfer |
| Math o Gysylltydd | Sgriw |
| Newid Math | Rocwr |
| Terfynell | Sgriw |
| Deunydd | Pholycarbonad |
| Math Cylchdaith | 2-ffordd |
| Math Mowntio | Mowntio Dan Do |
| Math Actuator | Botwm Gwthio |
| Nifer y Swyddi | 2 |
| Dull Rheoli | Botwm Gwthio |
| Protocol Cysylltedd | Wi-Fi, RF433 (Note: This specific model M1-P105 is a mechanical rocker switch, not Wi-Fi/RF433 enabled. This specification might refer to other CNBINGO products.) |
| Lliw | Gwyn |
| Deunydd Cyswllt | Copr |
| Sgôr Diogelu Rhyngwladol | IP65 |
4. Gosod
4.1 Cyn Gosod
- Ensure the power supply to the circuit is completely OFF at the main breaker.
- Confirm you have all necessary tools (screwdriver, wire strippers, voltage profwr).
- Verify the existing wall box is suitable for the switch dimensions.
4.2 Dimensiynau Mowntio
Delwedd: Standard dimensions of the switch, indicating it fits standard flush-mounted boxes (86x86mm with 21mm mounting depth).
The switch is designed for standard flush-mounted boxes. The front panel measures 86mm x 86mm, and the module requires a mounting depth of 21mm.
4.3 Diagram Gwifro
Delwedd: Wiring diagram illustrating connections for a double rocker switch in both 1-way and 2-way configurations. Blue indicates Neutral, Red indicates Live, and Black indicates Load wires to the lights.
The switch supports both 1-way (single location control) and 2-way (multiple location control) wiring. Refer to the diagram for correct connections.
- Live Wire (L): Connect the incoming live wire to the 'L' terminal.
- Load Wires (L1, L2): Connect the load wires going to your light fixtures to the 'L1' and 'L2' terminals for each respective switch.
- Two-Way Wiring (L1, L2, L3): For 2-way control, connect the common live wire to 'L' and the two traveler wires between the switches to 'L1' and 'L2' (or 'L1' and 'L3' depending on the specific terminal layout). Consult a qualified electrician if unsure.
Delwedd: Cefn view of the switch, detailing the screw terminals for electrical connections.
4.4 Camau Gosod
- Pwer i ffwrdd: Gwnewch yn siŵr bod y prif gyflenwad pŵer wedi'i ddiffodd.
- Tynnu'r Hen Switsh: Tynnwch y switsh presennol o'r blwch wal yn ofalus.
- Cysylltiadau Gwifren: Connect the wires to the appropriate terminals on the CNBINGO switch as per the wiring diagram. Ensure all connections are tight.
- Mowntio Switsh: Gently push the switch module into the wall box. Secure it using the provided screws.
- Attach Glass Panel: Snap the crystal glass panel onto the switch module. The design is screwless for a clean finish.
- Adfer Pwer: Trowch y prif gyflenwad pŵer yn ôl ymlaen.
- Prawf: Test the functionality of the switch.
5. Cyfarwyddiadau Gweithredu
5.1 Gweithrediad Sylfaenol
To operate the switch, simply press the top or bottom of the rocker panel to toggle the connected light fixture ON or OFF. Each rocker controls an independent circuit.
Delwedd: The CNBINGO Double Rocker Switch seamlessly integrated into various room settings, highlighting its modern design and ease of use.
5.2 Fluorescent Dots
The three green dots on each rocker are phosphorescent. They absorb ambient light during the day and glow faintly in the dark, making the switch visible at night without being overly bright or disruptive to sleep.
Delwedd: Ochr profile of the switch, showcasing the elegant crystal glass panel and the subtle phosphorescent dots.
5.3 Rheolaeth Dwyffordd
If wired for two-way control, the switch can be used in conjunction with another two-way switch to control a single light fixture from two different locations (e.g., at the top and bottom of a staircase).
6. cynnal
- Glanhau: The crystal glass panel can be cleaned with a soft, damp brethyn. Osgoi glanhawyr sgraffiniol neu gemegau llym a allai niweidio'r gorffeniad.
- Arolygiad: Periodically inspect the switch for any signs of damage or loose connections. If any issues are found, disconnect power and consult a qualified electrician.
- Dim Rhannau Defnyddiadwy Defnyddiwr: Do not attempt to disassemble the switch module. There are no user-serviceable parts inside.
7. Datrys Problemau
| Problem | Achos Posibl | Ateb |
|---|---|---|
| Nid yw'r golau yn troi YMLAEN/DIFFODD. | No power to the switch; Loose wiring connection; Faulty light bulb; Incorrect wiring. | Check circuit breaker; Ensure all wires are securely connected; Replace light bulb; Verify wiring against diagram, consult electrician if needed. |
| Switch feels loose in the wall. | Mounting screws are not tight. | Turn off power, then tighten mounting screws. |
| Phosphorescent dots do not glow. | Amlygiad annigonol i olau. | Ensure the switch is exposed to ambient light during the day to charge the phosphorescent material. |
| Mae switsh yn gwneud sain suo. | Loose connection; Incompatible load (rare for mechanical switches). | Turn off power and check all wiring connections. If the issue persists, consult a qualified electrician. |
8. Gwarant a Chefnogaeth
CNBINGO switches are manufactured with high-quality materials and are designed for a long operational life, up to 25 years under normal use conditions.
For technical support or warranty inquiries, please contact your retailer or visit the official CNBINGO website. Please have your model number (M1-P105) and purchase details ready.