Llawlyfr Defnyddiwr Llwybrydd Teltonika RUTX14 CAT12 4G LTE

1. Rhagymadrodd

The Teltonika RUTX14 is a high-performance industrial cellular router designed for mission-critical applications requiring reliable and secure internet connectivity. Featuring CAT12 LTE for high-speed data transfer, dual-band Wi-Fi (802.11ac), GNSS/GPS capabilities, and Bluetooth, the RUTX14 provides robust networking solutions for various environments. This manual provides essential information for the proper installation, configuration, and operation of your RUTX14 router.

2. Gwybodaeth Diogelwch

• Datgysylltwch y pŵer bob amser cyn cyflawni unrhyw weithdrefnau cynnal a chadw neu osod.
• Ensure the device is installed in a well-ventilated area to prevent overheating.
• Use only the power adapter and accessories provided or approved by Teltonika.
• Peidiwch ag amlygu'r ddyfais i ddŵr, lleithder, na thymheredd eithafol.
• This device is intended for indoor use unless specifically rated for outdoor environments.

3. Cynnwys Pecyn

Gwiriwch fod yr holl eitemau yn bresennol yn eich pecyn:

• Teltonika RUTX14 Router
• Addasydd Pŵer
• Mobile Antennas (x4)
• WiFi Antennas (x2)
• GNSS Antenna (x1)
• Cebl Ethernet
• Canllaw Cychwyn Cyflym

4. Dyfais Drosoddview

Familiarize yourself with the physical components and ports of the RUTX14 router.

Delwedd 4.1: Labeled diagram of the Teltonika RUTX14 router, highlighting all external ports and connectors for easy identification. This includes mobile antenna connectors, GNSS antenna connector, WiFi antenna connectors, Bluetooth antenna connector, USB port, grounding screw, SIM card slots, reset button, 4-pin power socket, LAN ports, and WAN port.

Panel blaen

Delwedd 4.2: Yn agos view of the RUTX14's front panel. This image displays the PWR LED, Reset button, WiFi 2.4GHz and 5GHz LEDs, SIM1 and SIM2 slots, four LAN ports, one WAN port, and status LEDs for WAN, SIM1, SIM2, WiFi, ETH, 3G/4G, and signal strength.

• PWR LED: Yn dynodi statws pŵer.
• Botwm AILOSOD: Used to restore factory defaults or reboot the device.
• WiFi LEDs (2.4/5): Indicate Wi-Fi activity for respective bands.
• SIM1/SIM2 Slots: For inserting cellular SIM cards.
• Porthladdoedd LAN (1-4): Ethernet ports for local network connections.
• Porthladd WAN: Ethernet port for Wide Area Network connection (e.g., to an upstream modem).
• Statws LEDs: Provide visual feedback on WAN, SIM status, Wi-Fi, Ethernet, 3G/4G connectivity, and cellular signal strength.

Panel Ochr

Delwedd 4.3: Manwl view of the RUTX14's side panel. This image shows the various antenna connectors: Mobile AUX (x4), Mobile MAIN (x1), GPS (x1), WiFi (x2), and BT (x1). Also visible are the USB port and the grounding screw.

• Mobile Antenna Connectors (MAIN/AUX): For connecting cellular antennas.
• GPS Antenna Connector: For connecting a GNSS/GPS antenna.
• WiFi Antenna Connectors: For connecting Wi-Fi antennas.
• Cysylltydd Antena BT: For connecting a Bluetooth antenna.
• Porth USB: Ar gyfer cysylltu dyfeisiau allanol neu storio.
• Sgriw Grounding: For proper grounding of the device.

5. Gosod Caledwedd

5.1. Gosod Cerdyn SIM

1. Locate the SIM card slots on the front panel.
2. Using a SIM ejector tool or a paperclip, press the small button next to the SIM slot to open the tray.
3. Insert your activated Nano-SIM card(s) into the tray(s) with the gold contacts facing down.
4. Gwthiwch yr hambwrdd yn ôl i'r slot yn ysgafn nes ei fod yn clicio i'w le.

5.2. Cysylltiad Antena

Connect the provided antennas to their respective connectors on the device:

• Antenâu Symudol: Connect the four cellular antennas to the 'MOBILE MAIN' and 'MOBILE AUX' connectors.
• Antenâu WiFi: Connect the two Wi-Fi antennas to the 'WiFi' connectors.
• Antena GNSS: Connect the GPS antenna to the 'GPS' connector.
• Antena Bluetooth: Connect the Bluetooth antenna to the 'BT' connector.

Ensure all antennas are securely tightened by hand.

5.3. Cysylltiad Pwer

1. Connect the 4-pin power adapter to the power socket on the front panel.
2. Connect the other end of the power adapter to a suitable power source (9-50 VDC).
3. The PWR LED should illuminate, indicating the device is receiving power.

5.4. Seilio

For enhanced safety and protection against electrical surges, connect a grounding wire to the grounding screw on the side panel and to a proper earth ground.

6. Gosodiad Cychwynnol

6.1. Wrth gael mynediad i'r Web Rhyngwyneb Defnyddiwr (WebUI)

1. Connect your computer to one of the RUTX14's LAN ports using an Ethernet cable.
2. Agor a web porwr a nodwch y cyfeiriad IP diofyn: 192.168.1.1
3. You will be prompted for login credentials. The default username is gweinyddwr. The default password is usually found on a sticker on the device or in the Quick Start Guide.
4. Upon successful login, you will access the WebUI for configuration.

6.2. Ffurfweddiad Sylfaenol

Follow the on-screen setup wizard or navigate through the WebUI to configure essential settings:

• Gosodiadau WAN: Configure your primary internet connection (e.g., cellular APN settings, Ethernet WAN).
• Gosodiadau LAN: Adjust the local network IP range if necessary.
• Gosodiadau Wi-Fi: Set up your Wi-Fi network name (SSID) and password for both 2.4GHz and 5GHz bands.
• Newid Cyfrinair Diofyn: For security, it is highly recommended to change the default administrator password immediately.

7. Operating the RUTX14

7.1. Understanding LED Indicators

Monitor the front panel LEDs to understand the router's operational status:

• PWR: Mae gwyrdd solet yn dynodi pŵer ymlaen.
• SIM1/SIM2: Indicates active SIM card and network registration.
• 3G/4G: Indicates cellular network type (3G or 4G LTE).
• Cryfder y signal: Multiple LEDs indicate the strength of the cellular signal. More LEDs lit means stronger signal.
• WiFi (2.4/5): Indicates Wi-Fi activity on the respective band.
• ETH/LAN/WAN: Indicates Ethernet link status and activity.

7.2. LTE Failover

The RUTX14 supports automatic LTE failover, ensuring continuous internet connectivity. If the primary WAN connection (e.g., Ethernet) fails, the router can automatically switch to the cellular LTE connection. This feature is configured within the WebUI under Network > WAN settings.

7.3. GNSS/GPS Functionality

With the connected GNSS antenna, the RUTX14 can provide precise location data. This functionality is accessible and configurable through the WebUI, enabling applications such as fleet tracking or asset management.

7.4. Cysylltedd Bluetooth

The integrated Bluetooth module allows for short-range wireless communication with compatible devices, enabling various IoT and industrial applications. Configuration options are available in the WebUI.

8. cynnal

8.1. Diweddariadau Firmware

Regularly check for and install firmware updates to ensure optimal performance, security, and access to new features. Firmware updates can be performed via the WebUI under System > Firmware.

8.2. Ailosod Ffatri

If you encounter persistent issues or forget your login credentials, you can perform a factory reset. Press and hold the RESET button for approximately 10 seconds while the device is powered on. This will revert all settings to their default values.

8.3. Glanhau

Defnyddiwch frethyn meddal, sych i lanhau tu allan y ddyfais. Peidiwch â defnyddio glanhawyr hylif na thoddyddion.

9. Datrys Problemau

• Dim pŵer: Ensure the power adapter is securely connected and the power outlet is functional. Check the PWR LED.
• Dim Cysylltiad Rhyngrwyd:
  • Gwiriwch fod y cerdyn SIM wedi'i fewnosod a'i actifadu'n gywir.
  • Check cellular signal strength LEDs.
  • Confirm APN settings in the WebUI are correct.
  • If using Ethernet WAN, ensure the cable is connected and the upstream device is working.
• Methu Mynediad WebUI:
  • Ensure your computer is connected to a LAN port.
  • Gwiriwch fod gosodiadau IP eich cyfrifiadur wedi'u gosod i gael cyfeiriad IP yn awtomatig (DHCP).
  • Confirm you are using the correct IP address (192.168.1.1) and credentials.
  • Rhowch gynnig ar glirio storfa eich porwr neu ddefnyddio porwr gwahanol.
• Cyflymder Araf:
  • Check cellular signal strength and try repositioning antennas.
  • Gwnewch yn siŵr nad oes unrhyw ddyfeisiau eraill yn defnyddio gormod o led band.
  • Verify your cellular data plan limits.

10. manylebau

11. Gwarant a Chefnogaeth

Teltonika products are covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your product or visit the official Teltonika website. For technical support, firmware downloads, and additional resources, please consult the Teltonika support portal or contact your vendor.